Self-assembly of highly efficient, broadband plasmonic absorbers for solar steam generation

Lin Zhou,Yingling Tan,Dengxin Ji,Bin Zhu,Pei Zhang,Jun Xu,Qiaoqiang Gan,Zongfu Yu,Jia Zhu

DOI: https://doi.org/10.1126/sciadv.1501227

IF: 13.6

2016-04-01

Science Advances

Abstract:A self-assembling plasmonic absorber absorbs light efficiently across a wide range of wavelengths and could be used in nanophotonic devices.

multidisciplinary sciences

What problem does this paper attempt to address?

Broadband Plasmonic Absorbers for Highly efficient Solar Steam Generation

Lin Zhou,Yingling Tan,Jia Zhu

DOI: https://doi.org/10.1364/pv.2015.pw3b.3

2015-01-01

Abstract:The field of plasmonics has generated tremendous excitement in the last decade, because of its unique capabilities to focus light into deeply subwavelength volumes, leading to highly localized hot spots at extreme field intensities. In this study, we demonstrate a plasmonic absorber fabricated through self-assembly processes, which has an average measured absorbance of ~ 99% across the wavelengths from 400 nm to 20 µm, the most efficient and broadband plasmonic absorber reported so far. Solar steam generation based on it has over 90% efficiency under solar irradiation of only 4-sun intensity (4 kWm−2). Because of its superior absorption properties, strong field enhancement, unique porous structures together with scalable processes, we believe this type of plasmonic absorbers might find general usage for a variety of other applications from photo-catalysis, solar-thermoPV, solar desalination to infrared detectors.
Scalable Selective Absorber with Quasiperiodic Nanostructure for Low-Grade Solar Energy Harvesting

Zifu Xu,Ying Li,Gang Gao,Fei Xie,Ran Ju,Shimin Yu,Kaipeng Liu,Jiaxin Li,Wuyi Wang,Wei Li,Tianlong Li,Cheng-Wei Qiu

DOI: https://doi.org/10.1063/5.0135193

IF: 5.6

2023-01-01

APL Photonics

Abstract:Although the solar-thermal technology has opened up a potential green energy harvesting method, it is challenging to suppress the non-negligible energy dissipation while maintaining a high absorbance. Most disordered organic polymers are almost incapable of limiting the absorption in the desired cutoff wavelength range, which is detrimental to the design of selective absorbers. Moreover, the development of absorbers with a periodic plasmonic nanostructure is always lacking in cost-effective scalability. Herein, we report a scalable selective absorber with a quasiperiodic nanostructure composed by an economical widespread surface self-assembly of densely arranged Fe3O4 nano-particles, possessing a high-performance energy conversion for low-grade solar energy. By investigating the scale effect of the quasiperiodic densely arranged plasmonic nanostructure, a significant solar absorption >94% and ideal passive suppression of thermal emissivity <0.2 can be obtained simultaneously. With the synergy of material properties, thermal management, and environmental effect, a flexible planar solar thermoelectric harvester is demonstrated under natural sunlight (AM1.5G), reaching a significant sustaining open-circuit voltage of >20 mV/cm2, without a heat sink. This highly versatile strategy is expected to lead the exploration of energy evolution in fundamental research and pioneer next-generation, high-performance, economical, and practical solar co-harvesting systems.
Self-assembled spectrum selective plasmonic absorbers with tunable bandwidth for solar energy conversion

Lin Zhou,Shendong Zhuang,Chengyu He,Yingling Tan,Zhenlin Wang,Jia Zhu

DOI: https://doi.org/10.1016/j.nanoen.2016.12.031

IF: 17.6

2017-02-01

Nano Energy

Abstract:Plasmonic nanostructures enable manipulation of light ranging from ultraviolet, visible to infrared regime based on steering on a variety of optical resonances. For various applications such as biomedical sensing, photodetectors and solar energy conversion, it is desirable to fabricate plasmonic absorbers with finely tuned bandwidth. In this work, for the first time, we report that spectrum-selective plasmonic absorbers with flexibly tuned bandwidth can be fabricated by a convenient self-assembly process. The plasmonic absorbers demonstrate an extraordinary absorption (above 90%) with absorption cutoff wavelengths flexibly tuned from visible (~550nm) to infrared (~2500nm). The pronounced absorption can be ascribed to plasmon hybridization of the close-packed gold nanoparticles, while optical cutoff effect of the gold-particle-assembly built nanotube leads to the tunable absorption edge. These tunable plasmonic absorbers also demonstrate excellent high temperature stability (up to 1073 K) with a thin alumina protection coating and applications for solar steam generation. Therefore, the plasmonic absorbers with tunable absorption bandwidth and thermal stability can serve as promising candidates for various solar energy conversion applications, such as solar steam generation, photocatalysis, etc.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Efficient, Scalable, And High-Temperature Selective Solar Absorbers Based On Hybrid-Strategy Plasmonic Metamaterials

Yang Li,Dezhao Li,Dan Zhou,Cheng Chi,Shihe Yang,Baoling Huang

DOI: https://doi.org/10.1002/solr.201800057

IF: 9.1726

2018-01-01

Solar RRL

Abstract:Solar-thermal energy conversion is a promising technology that enables efficient harvesting of sunlight for a broad range of applications. High-performance spectrally selective absorbers with excellent thermal stability are the key to developing efficient high-temperature solar-thermal systems. Recently, plasmonic metamaterial absorbers (PMAs) made of high-loss and refractory materials have aroused special interests, because of their unique capability to trap and absorb sunlight through deep-subwavelength structures with highly tunable spectral selectivity. However, the performance of current PMAs is far from satisfactory owing to both imperfect visible light absorption and ultrahigh infrared emission. Herein, by introducing out-of-plane plasmonic coupling between triangular nanodisks and a tantalum reflector in a metal-insulator-metal (MIM) sandwich structure, we developed 240-nm-thick hybrid-strategy (structure-, material-, and shape-based) PMAs, which demonstrate full-spectrum sunlight absorption and greatly reduced infrared emission, ultimately boosting the record-high solar-thermal efficiency (1000K) of PMAs from 66.4% to 77.3% under 100-sun illumination. This superior performance is not only stable at temperatures of 1000K, but also robust to the variations in the constituent materials of top nanodisks and dielectric spacers. Moreover, the performance of such PMAs is independent of the lateral periodicity or orientations of meta-atoms, paving the way for their large-scale deployment.
A Metal Nanoparticle Assembly with Broadband Absorption and Suppressed Thermal Radiation for Enhanced Solar Steam Generation

Dawei Ding,Hu Wu,Xiaoping He,Fan Yang,Chuanbo Gao,Yadong Yin,Shujiang Ding

DOI: https://doi.org/10.1039/d1ta01045j

IF: 11.9

2021-01-01

Journal of Materials Chemistry A

Abstract:The efficiency of solar steam generation is boosted by broadband solar absorption and suppressed thermal radiation loss of a nickel-nanoparticle-based spectrally selective absorber.
Flexible Plasmonic Cellulose Papers for Broadband Absorption and Efficient Solar Steam Generation

Changlin Dong,Yang Yuan,Guofen Song,Jinghan Li,Qingtong Wang,Chenxin Zhou,Ashfaq Ahmad,Cuiping Guo,Wang Zhang,Qinglei Liu,Jiajun Gu,Fang Song,Di Zhang

DOI: https://doi.org/10.1007/s40843-022-2238-6

2023-01-01

Science China Materials

Abstract:Plasmonic solar absorber holds great potential in solar-powered steam generation due to its resonant absorption, rapid photo-to-heat conversion, and localized heating impact. However, expanding the absorption bandwidth of plasmonic nanoparticles is challenging. Here, we produce flexible plasmonic cellulose papers (PCPs) with broadband absorption by filling the nanogaps (between nanofibrils) of commercially available cellulose papers (CPs) with plasmonic nanoparticles. A nanoconfinement strategy is employed for the fast and easy-to-scale-up synthesis of Ag- and Cu-based PCPs. In particular, Ag-CP exhibits a broadband solar absorption efficiency of up to 93.7% at a spectrum range of 250-2500 nm and a solar-to-thermal efficiency of 85.2% under 1 kW m(-2) irradiation (1 sun). The nanoconfinement effect serves as a simple and flexible platform to regulate the particle size and interspace and reduce the aggregation. By combining the analysis of structure-regulated absorption behaviors with theoretical simulations, we conclude that the unique microstructure tailors the interparticle coupling effect, the predominant cause of the strong broadband plasmonic absorption. Our work presents a nanoconfinement strategy to tune solar absorption and demonstrates an appealing plasmonic solar absorber.
Hierarchical porous metallic glass with strong broadband absorption and photothermal conversion performance for solar steam generation

Jianan Fu,Zhen Li,Xin Li,Fei Sun,Luyao Li,Hongzhen Li,Jinlai Zhao,Jiang Ma

DOI: https://doi.org/10.1016/j.nanoen.2022.108019

IF: 17.6

2022-11-22

Nano Energy

Abstract:The development of a strong light absorption absorber with a facile preparation process are crucial for some photothermal conversion applications, such as solar steam generation, photothermal catalysis and detectors. Here, a hierarchical structure based on microporous surface equipped with nanoporous layer is ingeniously designed and fabricated benefiting from the unique thermoplastic forming ability of metallic glasses by using the soluble clusters as template in less than 30 seconds. The presence of hierarchical porous structures induces multiple reflection of light and excites the plasmonic behavior of surface, achieving over 90% light absorption in the 380–20 μm wavelength range and the broad light incident angle from 0° to 70°, resulting in a remarkable photothermal conversion performance. Compared to conventional and existing absorber, the innovatively designed and fabricated metallic surface offers outstanding advantages in terms of light absorption range, heating rate and maximum temperature rise. Afterwards, the hierarchical porous structures for solar steam generation shows an evaporation efficiency of up to 94.2% and evaporation rate of 1.72 kg m -2 h -1 at 1 kW m −2 . The design of unprecedented structure on metallic glass opens up a new strategy for solar energy harvesting, water treatment and other related fields.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Quasi‐Ordered Nanoforests with Hybrid Plasmon Resonances for Broadband Absorption and Photodetection

Mao Li,Meng Shi,Bin Wang,Chenchen Zhang,Shuai Yang,Yudong Yang,Na Zhou,Xin Guo,Dapeng Chen,Shaojuan Li,Haiyang Mao,Jijun Xiong

DOI: https://doi.org/10.1002/adfm.202102840

IF: 19

2021-06-19

Advanced Functional Materials

Abstract:<p>With the continuing development of green energy technology, solar energy is the most widely distributed and easily utilized form of energy in nature. High-absorption absorbers over a wide spectrum range are beneficial for solar energy harvest. Herein, a fast and efficient method is developed to fabricate a broadband absorber consisting of quasi-ordered nanoforests and metal nanoparticles using a simple plasma bombardment process on a 4-inch silicon wafer, offering high throughputs that can meet practical application demands. The absorber exhibits high absorption exceeding 90% from 300 to 2500 nm, good absorption stability with negligible disturbance from the polarization and the incident angle of light. This effective absorption behavior can be ascribed to multilevel hybridization of the plasmon resonances in the hybrid structures and cavity mode resonances inside the nanoforests. Furthermore, the absorber is integrated onto a thermopile for photodetection with largely enhanced photoresponse from 532 to 2200 nm. The photoinduced voltage of the devices shows a large increment of 433% at 100 mW cm<sup>−2</sup> light power density, in comparison with a contrast pristine thermopile. It is expected that such a broadband absorber holds great potential for multiple applications, including solar steam generation, photodetection, and solar cells.</p>

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Broadband Absorption of Electrospun Scaffold-Assisted Self-Assembled Metal Nanostructures for Solar-Powered Water Evaporation

Lu Li,Jianing Wang,Bo Jiao,Xiang Zuo,Zhenxiao Wang,Xin He,Hua Dong,Xun Hou,Zhaoxin Wu

DOI: https://doi.org/10.1016/j.orgel.2022.106727

2022-01-01

SSRN Electronic Journal

Abstract:Broadband absorbers are highly attractive due to its critical role in solar-powered water evaporation. Currently, various absorbing materials have been intensively studied. However, complicated fabrication process as well as the rigid and unportable structure still limit the application of these absorbing materials. Here we reported a novel plasmonic absorber with electrospun scaffold-assisted self-assembled metal nanostructures. The plasmonic absorber can be facilely fabricated by depositing gold on electrospun Polystyrene nanofiber scaffold. A high absorbance around 90% over a broadband spectrum from 400 nm to 1000 nm has been achieved. Our absorber exhibited remarkable evaporation rate of 1.852 kg/m(2)center dot h and high solar thermal conversion efficiency of 98.7% under one sun. We attributed the broadband absorption performance to the contributions of various gold nanostructures inside the PS scaffold. This work paves a novel way for the construction of high-performance, low-cost, and portable broadband plasmonic absorber, which exhibits a promising potential for many applica-tions such as solar desalination and wastewater purification.
Plasmonic Nanostructures for Broadband Solar Absorption Based on Synergistic Effect of Multiple Absorption Mechanisms

Junli Su,Dingquan Liu,Leihao Sun,Gang Chen,Chong Ma,Qiuyu Zhang,Xingyu Li

DOI: https://doi.org/10.3390/nano12244456

IF: 5.3

2022-12-15

Nanomaterials

Abstract:The growing attention to solar energy has motivated the development of highly efficient solar absorbers. In this study, a high-performance meta-structure solar absorber (MSSA) based on a tungsten truncated cone structure combined with a film resonator structure has been proposed and demonstrated numerically. The designed structure exhibits over 97.1% total solar absorption efficiency and less than 8.5% total thermal emissivity under the condition of one solar concentration, hence reaching 91.6% photothermal conversion efficiency at 100 °C. In addition, the proposed MSSA achieves promisingly high spectrum absorptance of over 97.8% in the ultraviolet, visible and near-infrared regions (280–1700 nm). Based on the simulation analysis, the enhanced light absorption is attributed to the synergistic effect of the magnetic polaritons (MPs) on the nanostructured metal surface, the cavity plasmon resonance between the truncated cones that can form light-trapping structures, the magnetic field resonance of the metal–insulator–metal (MIM) optical resonator and the inherent loss of tungsten. The impedance of the absorber is well matched with free space. Furthermore, the optimized absorber shows great potential in solar thermophotovoltaic applications that require wide-angle polarization-independent ultra-broadband light response characteristics.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Ni‐based Plasmonic/Magnetic Nanostructures As Efficient Light Absorbers for Steam Generation

Fan Yang,Jinxing Chen,Zuyang Ye,Dawei Ding,Nosang Vincent Myung,Yadong Yin

DOI: https://doi.org/10.1002/adfm.202006294

IF: 19

2020-01-01

Advanced Functional Materials

Abstract:Solar steam generation technologies have gained increasing attention due to their great potential for clean water generation with low energy consumption. The rational design of a light absorber that can maximize solar energy utilization is therefore of great importance. Here, the synthesis of Ni@C@SiO2 core–shell nanoparticles as promising light absorbers for steam generation by taking advantage of the plasmonic excitation of Ni nanoparticles, the broadband absorption of carbon, and the protective function and hydrophilic property of silica is reported. The nanoparticle‐based evaporator shows an excellent photothermal efficiency of 91.2%, with an evaporation rate of 1.67 kg m−2 h−1. The performance can be further enhanced by incorporating the nanoparticles into a polyvinyl alcohol hydrogel to make a composite film. In addition, utilizing the magnetic property of the core–shell particles allows the creation of surface texture in the film by applying an external magnetic field, which helps increase surface roughness and further boost the evaporation rate to as high as 2.25 kg m−2 h−1.
Broadband Refractory Plasmonic Absorber Without Refractory Metals for Solar Energy Conversion

Baoqing Wang,Wenhao Wang,Eric Ashalley,Xutao Zhang,Peng Yu,Hongxing Xu,Zhiming M. Wang

DOI: https://doi.org/10.1088/1361-6463/abcc27

2021-01-01

Abstract:Electromagnetic wave absorbers with full-spectrum near-unity solar absorption are extremely desirable for solar energy conversion. Here, we theoretically proposed a broadband refractory plasmonic absorber without refractory metal, which has nearly perfect absorption over the whole solar spectrum. The absorber is supported by a periodic refractory dielectric framework of alumina and exhibits superior solar-selective and omnidirectional absorption. The simulated average absorption efficiency is up to 96% from 300 to 1400 nm, and the solar energy absorption efficiency can reach up to 90.8% over the entire solar spectrum range. Moreover, the steady-state temperature profile indicates that the absorber heats uniformly. The broadband refractory plasmonic absorber paves the way for the selective thermal absorption under high-temperature environment and holds great promise for solar energy harvesting and desalination applications.
Multilayer stacked ultra-wideband perfect solar absorber and thermal emitter based on SiO2-InAs-TiN nanofilm structure

Peng Chen,Qianju Song,Can Ma,Zao Yi,Liang Bian,Shubo Cheng,Zhiqiang Hao,Tangyou Sun,Pinghui Wu,Qingdong Zeng

DOI: https://doi.org/10.1039/d4dt01626b

2024-07-23

Abstract:In this paper, a broadband solar absorber is constructed and simulated based on the finite difference time domain method (FDTD). The modeled structure of the absorber consists of cyclic stacking of five absorber cells with different periods on refractory metal W, where a single absorber cell is composed of a three-layer SiO2-InAs-TiN square film. Due to the Fabry-Perot resonance and the surface plasmon resonance (SPR), an absorptivity greater than 90% within a bandwidth of 2599.5 nm was achieved for the absorber. Notably, one of these bands, 2001 nm, is a high-efficiency absorption with an absorption rate greater than 99%. The average absorption efficiency reaches 99.31% at an air mass of 1.5 (AM 1.5), and the thermal radiation efficiencies are 97.35% and 97.83% at 1000 K and 1200 K, respectively. At the same time, the structure of the absorber is also polarization-independent, and when the solar incidence angle is increased to 60°, it still achieves an average absorption of 90.83% over the entire wavelength band (280 nm to 3000 nm). The novelty of our work is to provide a design idea based on a unit structure with multiple cycles, which can effectively expand the absorption bandwidth of the absorber in the visible-near-infrared wavelengths. The excellent performances make the structure widely used in the field of solar energy absorption.
Non-noble metal based broadband photothermal absorbers for cost effective interfacial solar thermal conversion

Han Gong,Xin Liu,Guoliang Liu,Zhenhui Lin,Xiaoqiang Yu,Lin Zhou

DOI: https://doi.org/10.1515/nanoph-2020-0168

IF: 7.5

2020-01-01

Nanophotonics

Abstract:In recent years, noble metal-based solar absorbers have been extensively studied as their pronounced plasmonic resonances and high solar-to-thermal conversion efficiency. However, the high cost of noble metals is the unavoidable roadblock restricting the way towards scalability. In this work, we report a nickel-based photo-thermal absorbers, which is capable of realizing an average solar absorption of similar to 97% in the range of 400-2500 nm originating from relatively weaker collective plasmonic resonances but more pronounced single electron excitation. Importantly, it is easily fabricated via the straightforward physical deposition and cost-effective with a raw material price of similar to 0.3% gold and similar to 20% of silver. We used it for interfacial solar vapor generation and realized an evaporation rate of similar to 0.9 kg m(-2) h(-1) under one sun, almost comparable to the counterparts made from noble metals. The excellent performance combined with the cost effective and scalable fabrication process makes it be a promising candidate for mass off-grid solar desalination.
Biomimetic Superstructures Assembled from Au Nanostars and Nanospheres for Efficient Solar Evaporation

Guofen Song,Yang Yuan,Jie Liu,Qinglei Liu,Wang Zhang,Jing Fang,Jiajun Gu,Dongling Ma,Di Zhang

DOI: https://doi.org/10.1002/adsu.201900003

IF: 6.737

2019-01-01

Advanced Sustainable Systems

Abstract:The control of the shapes and assembling structures of plasmonic nanoparticles is vital for the optical properties and photothermal conversion performance. Here, gold nanospheres and nanostars are assembled into ridges/disordered nanohole arrays architecture in nanoparticle colloids using light‐trapping Papilio Paris forewings (OPPs) as templates. In solar steam generation, water evaporation efficiency reaches 83.3% for nanostar assemblies (NSAs) and 68.6% for nanosphere assemblies (NSPAs) under 1‐sun (1 kW m−2) irradiation. Both the biomimetic superstructures exhibit significant enhancement of near‐infrared light absorption compared to OPPs, and NSAs show higher absorption than NSPAs in the range of 200–2500 nm. Finite element method simulations reveal such broadband absorption is ascribed to the hybridization of localized surface plasmon modes of continuous‐assembled Au nanoparticles in the biomimetic structures as well as the wing photonic structures with light‐transferring ridges with an inverted V shape and light‐trapping disordered nanohole arrays. It is revealed that optical properties of superstructures can be tuned not only by controlling their 3D structures but also by changing the shape of nanosized building blocks. It is hoped that this work will provide inspirations for the design and assembly of nanophotonic structures and devices for solar energy conversion.
Solar Steam Generation Through Bio-Inspired Interface Heating of Broadband-Absorbing Plasmonic Membranes

Xinzhi Wang,Yurong He,Xing Liu,Gong Cheng,Jiaqi Zhu

DOI: https://doi.org/10.1016/j.apenergy.2017.03.080

IF: 11.2

2017-01-01

Applied Energy

Abstract:Efficient solar-enabled evaporation plays a critical role in solar power-based concentration systems, photochemical plants, seawater desalination technologies, etc. However, traditional processes for solar steam generation usually depend on high-temperature heating of the bulk liquid, which requires highly concentrated solar power and suffers from high energy and optical losses. Therefore, the enhancement of solar steam generation by bio-inspired interface solar heating is proposed in this work. In this study, easy-to-prepare, flexible, and reusable plasmonic membranes (PMs) were fabricated for realizing the bio-inspired interface solar heating and continuous steam transportation through the micropores of the membranes. A solar steam generation efficiency of similar to 85% was achieved at an illumination power of 10 kW m(-2). The effects of Au concentration in the membranes and optical power on the steam generation efficiency were systemically studied. The observed high evaporation rate and efficiency were attributed to three main factors: high (similar to 90%) and broadband solar absorption, efficient photo-thermal conversion due to high plasmon dissipation losses, and fast capillary flow in the membrane micropores. Finally, the application of PMs in a single basin solar still system for seawater desalination was investigated and the PMs exhibited great performance on enhancing the productivity of clean water. (C) 2017 Elsevier Ltd. All rights reserved.
Plasmonic Wood for High‐Efficiency Solar Steam Generation

Mingwei Zhu,Yiju Li,Fengjuan Chen,Xueyi Zhu,Jiaqi Dai,Yongfeng Li,Zhi Yang,Xuejun Yan,Jianwei Song,Yanbin Wang,Emily Hitz,Wei Luo,Minhui Lu,Bao Yang,Liangbing Hu

DOI: https://doi.org/10.1002/aenm.201701028

IF: 27.8

2017-01-01

Advanced Energy Materials

Abstract:Plasmonic metal nanoparticles are a category of plasmonic materials that can efficiently convert light into heat under illumination, which can be applied in the field of solar steam generation. Here, this study designs a novel type of plasmonic material, which is made by uniformly decorating fine metal nanoparticles into the 3D mesoporous matrix of natural wood (plasmonic wood). The plasmonic wood exhibits high light absorption ability (≈99%) over a broad wavelength range from 200 to 2500 nm due to the plasmonic effect of metal nanoparticles and the waveguide effect of microchannels in the wood matrix. The 3D mesoporous wood with numerous low‐tortuosity microchannels and nanochannels can transport water up from the bottom of the device effectively due to the capillary effect. As a result, the 3D aligned porous architecture can achieve a high solar conversion efficiency of 85% under ten‐sun illumination (10 kW m−2). The plasmonic wood also exhibits superior stability for solar steam generation, without any degradation after being evaluated for 144 h. Its high conversion efficiency and excellent cycling stability demonstrate the potential of newly developed plasmonic wood to solar energy‐based water desalination.
Dual Plasmons with Bioinspired 3D Network Structure Enabling Ultrahigh Efficient Solar Steam Generation

Yong Wang,Wanting He,Ruiqi Yang,Darius Pohl,Bernd Rellinghaus,Peter A. C. Neathway,Zahra Kalantari Bolaghi,Chen Wang,Ting Yu,Fan Yang,Guozhu Chen,Mohamed Chaker,Aycan Yurtsever,Gianluigi A. Botton,Yannan Liu,Dongling Ma

DOI: https://doi.org/10.1021/acs.nanolett.4c03018

IF: 10.8

2024-08-24

Nano Letters

Abstract:Plasmonic nanomaterials such as Au, Ag, and Cu are widely recognized for their strong light-matter interactions, making them promising photothermal materials for solar steam generation. However, their practical use in water evaporation is significantly limited by the trade-off between high costs and poor stability. In this regard, we introduce a novel, nonmetallic dual plasmonic TiN/MoO(3-x) composite. This composite features a three-dimensional, urchin-like biomimetic structure, with plasmonic...

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
All‐Dielectric Insulated 3D Plasmonic Nanoparticles for Enhanced Self‐Floating Solar Evaporation under One Sun

Yang Wang,Haiyang Ma,Jianyu Yu,Jinlei Li,Ning Xu,Jia Zhu,Lin Zhou

DOI: https://doi.org/10.1002/adom.202201907

IF: 9

2023-01-24

Advanced Optical Materials

Abstract:All‐dielectric insulated plasmonic absorbers are presented as efficient self‐floating interfacial solar evaporators with measured efficiency of ≈80% under one sun, which shows a ≈20% increment to conventional gold/nanoporous‐template evaporators. The enhanced energy transfer process can be ascribed to synergistic effect of plasmon‐enhanced solar absorption, interfacial thermal insulation, and efficient mass transport channels. Plasmonic absorbers, featured by unique capability of broadband light absorption and nanoscale optical concentration, have long been regarded as ideal candidates for self‐floating interfacial solar evaporation yet suffering from low energy transfer efficiency because of poor thermal localization. In this work, by implanting an ion beam exfoliation of the continuous metallic film from the gold/nanoporous alumina template (Au/NPT), the all‐dielectric insulated plasmonic absorbers are demonstrated as efficient self‐floating interfacial solar evaporators with measured efficiency of ≈80% under one sun, which shows a ≈20% increment to conventional Au/NPT and is comparable to mainstream complicated carbon‐based evaporators with external thermal insulators. The enhanced energy transfer process can be ascribed to synergistic effect of plasmon‐enhanced solar absorption, broadband light induced thermal localization and/or insulation, as well as efficient mass transport channels. The results here would provide a new insight in underlying understanding and inspire further development of plasmonic solar thermal conversion.

materials science, multidisciplinary,optics
Plasmonic Nanostructures for Advanced Interfacial Solar Vapor Generation

Liu HaiZhou,Yu XiaoQiang,Li JinLei,Xu Ning,Zhou Lin,Zhu Jia

DOI: https://doi.org/10.1360/sspma-2019-0070

2019-01-01

Abstract:With the development of artificial microstructures and photothermal conversion, solar vapor generation (SVG) has become one of the most exciting fields of solar thermal energy utilizations, among which plasmonic photothermal evaporators have garnered tremendous interests. As the most important components of solar evaporators, plasmonic microstructures possess at least three appealing photothermal advantages with respect to traditional solar-thermal conversion devices. Firstly, plasmonic microstructures based solar absorbers can achieve highly efficient light harvesting across the entire solar irradiance spectral range with weighted solar absorptivity up to 95% or even higher. Secondly, plasmonic absorbers possess unique local heating effects which originate from both the material level (plasmonic hot spots effect) and system level (interfacial heating effect). Thirdly, plasmonic microstructures can exhibit tunable absorption and thermal emission properties in full wavelength range (from ultraviolet to mid-infrared), ideal for effective thermal loss suppression. In addition, plasmon-based solar vapor generation is also featured by a couple of pronounced materials and/or chemical priorities, such as effective anti-corrosiveness, Along recyclability as well as fast thermal response, which make them ideal candidates for some point-of-use off-grid applications, such as solar desalination for high salt concentration, wastewater treatment, domestic solar sterilization, etc. Aiming at the recent progresses on plasmon assisted efficient solar evaporation, this review demonstrates the photothennal designs on the emerging plasmonic solar vapor generation systems, which mainly focus on the microstructures enabled nanophotonic designs and thermal manipulation. Finally, the plasmonic solar evaporation based photothermal applications and a couple of crucial issues for the future prospective are outlined as well.

Self-assembly of highly efficient, broadband plasmonic absorbers for solar steam generation

Broadband Plasmonic Absorbers for Highly efficient Solar Steam Generation

Scalable Selective Absorber with Quasiperiodic Nanostructure for Low-Grade Solar Energy Harvesting

Self-assembled spectrum selective plasmonic absorbers with tunable bandwidth for solar energy conversion

Efficient, Scalable, And High-Temperature Selective Solar Absorbers Based On Hybrid-Strategy Plasmonic Metamaterials

A Metal Nanoparticle Assembly with Broadband Absorption and Suppressed Thermal Radiation for Enhanced Solar Steam Generation

Flexible Plasmonic Cellulose Papers for Broadband Absorption and Efficient Solar Steam Generation

Hierarchical porous metallic glass with strong broadband absorption and photothermal conversion performance for solar steam generation

Quasi‐Ordered Nanoforests with Hybrid Plasmon Resonances for Broadband Absorption and Photodetection

Broadband Absorption of Electrospun Scaffold-Assisted Self-Assembled Metal Nanostructures for Solar-Powered Water Evaporation

Plasmonic Nanostructures for Broadband Solar Absorption Based on Synergistic Effect of Multiple Absorption Mechanisms

Ni‐based Plasmonic/Magnetic Nanostructures As Efficient Light Absorbers for Steam Generation

Broadband Refractory Plasmonic Absorber Without Refractory Metals for Solar Energy Conversion

Multilayer stacked ultra-wideband perfect solar absorber and thermal emitter based on SiO2-InAs-TiN nanofilm structure

Non-noble metal based broadband photothermal absorbers for cost effective interfacial solar thermal conversion

Biomimetic Superstructures Assembled from Au Nanostars and Nanospheres for Efficient Solar Evaporation

Solar Steam Generation Through Bio-Inspired Interface Heating of Broadband-Absorbing Plasmonic Membranes

Plasmonic Wood for High‐Efficiency Solar Steam Generation

Dual Plasmons with Bioinspired 3D Network Structure Enabling Ultrahigh Efficient Solar Steam Generation

All‐Dielectric Insulated 3D Plasmonic Nanoparticles for Enhanced Self‐Floating Solar Evaporation under One Sun

Plasmonic Nanostructures for Advanced Interfacial Solar Vapor Generation