Spatial Variability of the Mechanical Parameters of High-Water-Content Soil Based on a Dual-Bridge CPT Test

Haifeng Lu,Huiying Li,Xiangshuai Meng

DOI: https://doi.org/10.3390/w14030343

IF: 3.53

2022-01-24

Water

Abstract:Soft soil generally has a high water content, and the accurate quantification of its mechanical parameters is an important aspect of foundation design and disaster prevention. The mechanical parameters of soft soil have significant spatial variability or heterogeneity due to the complex deposition process of soil, leading to the high uncertainty of the quantifications of its parameters. Therefore, understanding the spatial variability of the parameters is an important approach to reduce uncertainty. In this study, the high-resolution (0.1 m) tip resistance (qc) and side friction (fs) of 18 soft soils in coastal areas were measured using the Dual-bridge CPT in-situ test. The vertical and horizontal variabilities of qc and fs were investigated using the random field theory. The results showed that both qc and fs are stationary and ergodic. The coefficient of variation of vertical fs is much higher than that of qc. On the one hand, fs may be vulnerable to noise, and its test accuracy is lower than qc; on the other hand, it may be that the spatial variability of the residual strength of soft soil may be greater than that of its failure strength. The horizontal correlation distance and coefficient of variation of qc and fs have no obvious change trend along the depth direction, but compared with the coefficient of variation curve, it was found that the change trends of qc and fs are basically the same, which is considered to be related to the properties of the soil layer. The research results can provide support for the spatial variability evaluation and reliability analysis of soft-soil engineering in this area. At the same time, it can also provide a theoretical basis for the layout of exploration engineering and sampling spacing.

environmental sciences,water resources