Abstract:Traditional methods of removing snow and ice from pavements using chemicals are combined with mechanical removal that involves a lot of manpower, advanced machinery, chemicals that are harmful to the environment, and damage to pavements. Furthermore, annually, large quantities of ceramic materials become waste due to their fragile nature during processing, transport, and installation, and their accumulation in the nature has brought about environmental and health-related concerns. Therefore, the study aims to investigate the effect of using waste ceramic as a replacement for fine aggregate in roller compacted concrete (RCC) and the application of carbon fiber to improve the mechanical properties and electrical conductivity of RCC. To achieve this goal, several tests such as compressive strength, indirect tensile strength, electrical resistance, chloride ion penetration, specific gravity, and skid resistance tests were carried out on the fabricated samples before and after freeze-thaw cycling exposure. The experimental results illustrated that replacing waste ceramics with fine-grained aggregate increased the compressive strength and tensile strength of RCC. Furthermore, carbon fiber increased tensile strength but had no noticeable influence on compressive strength. Freeze-thaw conditioning led to a reduction in the compressive and tensile strength regardless of the aggregate type and carbon fiber utilization. In the samples containing waste ceramic aggregate, the electrical conductivity was reduced, and by adding carbon fiber, its electrical conductivity was increased. Exposure to freeze-thaw cycling resulted in an increase in electrical resistance and the passing charge. Waste ceramic incorporation created a similar mixture in terms of skid resistance, while in contrast, the carbon fiber slightly reduced the skid resistance. In addition, freeze-thaw conditioning resulted in an increase in the skid resistance. Besides, in this study, kernelized support vector regression (KSVR) and radial bias function (RBF) neural network models were proposed to estimate the indirect tensile strength (ITS) and compressive strength (CS) values. The results showed that both models have high performance in estimating these values, but RBF was a more efficient model.

Highly Conductive Carbon Fiber Reinforced Concrete for Icing Prevention and Curing

Preparation of carbon fiber conductive concrete and study on its mechanical and heating properties

Electric Resistance and Curing Temperature Development of Carbon Fiber-Reinforced Conductive Concrete: A Comparative Study

Ohmic heating curing of electrically conductive carbon nanofiber/cement-based composites to avoid frost damage under severely low temperature

Experimental study of ice melting of concrete permeable brick sidewalks using embedded carbon fibre heating wire

Electrical Resistivity and Joule Heating Characteristics of Cementitious Composites Incorporating Multi-Walled Carbon Nanotubes and Carbon Fibers

Electric induced curing of graphene/cement-based composites for structural strength formation in deep-freeze low temperature

Novel conductive wearing course using a graphite, carbon fiber, and epoxy resin mixture for active de-icing of asphalt concrete pavement

Investigation of using conductive asphalt concrete with carbon fiber additives in intelligent anti-icing systems

Research on the Electrosensitivity and Electrothermal Properties of Intelligent High-Performance Concrete Materials

Effects of Thermal Conductive Materials on the Freeze-Thaw Resistance of Concrete

Durability and Electrical Conductivity of Carbon Fiber Cloth/Ethylene Propylene Diene Monomer Rubber Composite for Active Deicing and Snow Melting

Effect of Atmospheric Temperature on Epoxy Coating Reinforced with Carbon Nanotubes for De-Icing on Road Systems

Self-heating curing and its influence on self-sensing properties of ultra-high performance concrete with hybrid stainless steel wires and steel fibers

Efficient Joule heaters based on mineral-impregnated carbon-fiber reinforcing grids: An experimental and numerical study on a multifunctional concrete structure as an electrothermal device

Experiment on Carbon/glass Fiber Weaving Mesh Enhancing Concrete Thermal Melting Ice

Preparation of Conductive Asphalt Concrete Based on the Action Mechanism of Conductive Phase Materials

Enhancing thermal conductivity of cement-based composites by optimizing pores and adding pitch-based carbon fibers for pavement cooling

Evaluating the Influence of Carbon Fiber on the Mechanical Characteristics and Electrical Conductivity of Roller-Compacted Concrete Containing Waste Ceramic Aggregates Exposed to Freeze-Thaw Cycling

Research on the Behavior of Rigid Pavement of Basalt Fiber Reinforced Dowel Bar under the Condition of Variable Temperature

Properties of Concrete Reinforced with a Basalt Fiber Microwave-Absorbing Shielding Layer