Abstract:In the years to come, Connected and Automated Vehicles (CAVs) are expected to substantially improve the road safety and environmental impact of the road transport sector. The information from the sensors installed on the vehicle has to be properly integrated with data shared by the road infrastructure (smart road) to realize vehicle control, which preserves traffic safety and fuel/energy efficiency. In this context, the present work proposes a real-time implementation of a control strategy able to handle simultaneously motion and hybrid powertrain controls. This strategy features a cascade of two modules, which were implemented through the model-based design approach in MATLAB/Simulink. The first module is a Model Predictive Control (MPC) suitable for any Hybrid Electric Vehicle (HEV) architecture, acting as a high-level controller featuring an intermediate layer between the vehicle powertrain and the smart road. The MPC handles both the lateral and longitudinal vehicle dynamics, acting on the wheel torque and steering angle at the wheels. It is based on a simplified, but complete ego-vehicle model, embedding multiple functionalities such as an adaptive cruise control, lane keeping system, and emergency electronic brake. The second module is a low-level Energy Management Strategy (EMS) of the powertrain realized by a novel and computationally light approach, which is based on the alternative vehicle driving by either a thermal engine or electric unit, named the Efficient Thermal Electric Skipping Strategy (ETESS). The MPC provides the ETESS with a torque request handled by the EMS module, aiming at minimizing the fuel consumption. The MPC and ETESS ran on the same Microcontroller Unit (MCU), and the methodology was verified and validated by processor-in-the-loop tests on the ST Microelectronics board NUCLEO-H743ZI2, simulating on a PC-host the smart road environment and a car-following scenario. From these tests, the ETESS resulted in being 15-times faster than than the well-assessed Equivalent Consumption Minimization Strategy (ECMS). Furthermore, the execution time of both the ETESS and MPC was lower than the typical CAN cycle time for the torque request and steering angle (10 ms). Thus, the obtained result can pave the way to the implementation of additional real-time control strategies, including decision-making and motion-planning modules (such as path-planning algorithms and eco-driving strategies).

Model predictive control of a dual fuel engine integrated with waste heat recovery used for electric power in buildings

Integrated Motion and Powertrain Predictive Control of Intelligent Fuel Cell/Battery Hybrid Vehicles

Holistic Diesel Engine and Exhaust After-Treatment Model Predictive Control

Hierarchical multi-time-scale predictive thermal management and fuel optimization for heavy-duty compression ignition engines

Fuel and Emissions Optimization for Connected Diesel Engine Vehicles With Hierarchical Model Predictive Control

Model Predictive Control of Internal Combustion Engines: A Review and Future Directions

Development of a Model Predictive Airpath Controller for a Diesel Engine on a High-Fidelity Engine Model with Transient Thermal Dynamics

Adaptive Model Predictive Control Including Battery Thermal Limitations for Fuel Consumption Reduction in P2 Hybrid Electric Vehicles

Experimental Validation of Nonlinear Model Predictive Control for a Heavy-Duty Diesel Engine Waste Heat Recovery System

Experimental Study and Model Predictive Control of a Lean-Burn Gasoline Engine Coupled With a Passive Selective Catalytic Reduction System

Model predictive control energy management strategy integrating long short-term memory and dynamic programming for fuel cell vehicles

Hybrid Electric Vehicle Model Predictive Control Torque-Split Strategy Incorporating Engine Transient Characteristics

A softly switched multiple Model Predictive Control of a turbocharged Diesel engine

Energy-efficient operation of the thermal management system in electric vehicles via integrated model predictive control

Decarbonization of heat pump dual fuel systems using a practical model predictive control: Field demonstration in a small commercial building

Integrated Power and Thermal Management of Connected HEVs via Multi-Horizon MPC

Data-Driven Model Identification and Efficient MPC Via Quasi-Linear Parameter Varying Representation for ORC Waste Heat Recovery System

Diesel Engine Transient NOx and Airpath Control using Rate-based Model Predictive Controller

Integration of a Model Predictive Control with a Fast Energy Management Strategy for a Hybrid Powertrain of a Connected and Automated Vehicle

Hierarchical model predictive control for an off-highway diesel engine with SCR catalyst

A Novel Dual-Model MPC-based Energy Management Strategy for Fuel Cell Electric Vehicle