Abstract:Demagnetization fault in a permanent magnet synchronous motor (PMSM) degrades its performance and may cause serious catastrophes. Fault localization technique can improve the reliability and safety of PMSM and provide important information for developing operation and maintenance strategies. Thus, a fault localization method is so important. Mainstream is a common method that uses search coil installed on every stator tooth to diagnose fault location. Due to the use of a large number of search coils, the method is limited in terms of invasiveness, implementation cost, and installation. Moreover, the method can only diagnose the fault location in PMSM with one demagnetized permanent magnet (PM). This article proposes a novel method which can detect the specific location of demagnetized PMs in PMSM with any types of demagnetization faults. The method only needs three additional toroidal yoke coils wound around the stator yoke. Toroidal yoke coils are used to measure the back electromotive force (EMF). The demagnetization fault localization signals (DFLSs) are produced by basic calculation of the output signals of three search coils. The DFLSs are partitioned according to the electrical period. The location of demagnetization fault can be diagnosed through analyzing each electric period waveform of DFLSs. First, the arrangement of toroidal-yoke-type search coil and the construction method of DFLSs are introduced. Second, a partitioned analytical model of DFLSs is developed. Third, waveforms in one electric period of DFLSs under preset fault types are investigated. Finally, the method for diagnosing demagnetization fault in PMSM is proposed. The simulation and experimental results justify the precision of the proposed search coil which shows the maximum error of back EMF to be 4.1%. It also shows the ability of the method to locate demagnetized PMs when the demagnetization severity (the ratio of the change in coercive force of PM to the normal coercive force) is 10%. This study provides a new method for diagnosing demagnetization fault, as well as provides a significant reference for fault post-processing and fault-tolerant control of PMSM.

Detection of permanent magnet damage of PMSM drive based on direct analysis of the stator phase currents using convolutional neural network

Demagnetization Fault Diagnosis of Permanent Magnet Synchronous Motors Based on Stator Current Signal Processing and Machine Learning Algorithms

Diagnosis of Stator Winding and Permanent Magnet Faults of PMSM Drive Using Shallow Neural Networks

Diagnosis of High-Resistance Connection Faults in PMSMs Based on GMR and Deep Learning

Application of continuous wavelet transform and convolutional neural networks in fault diagnosis of PMSM stator windings

Machine Learning-Based Stator Current Data-Driven PMSM Stator Winding Fault Diagnosis

Mechanism-Based Fault Diagnosis Deep Learning Method for Permanent Magnet Synchronous Motor

Classifying the Percentage of Broken Magnets in Permanent Magnet Synchronous Motors Using Combined Short-Time Fourier Transform and a Pre-Trained Convolutional Neural Network

Research and Application of Intelligent Diagnosis Technology in Permanent Magnet Generator for Stress Demagnetization Fault

Detection of Stator Winding Faults in PMSMs Based on Second Harmonics of Phase Instantaneous Reactive Powers

Demagnetization Fault Detection and Location in PMSM Based on Correlation Coefficient of Branch Current Signals

Fault Diagnosis of PMSMs Based on Image Features of Multi-Sensor Fusion

Data-driven early fault diagnostic methodology of permanent magnet synchronous motor

Demagnetization Fault Diagnosis Based on Feature Extraction and Convolutional Neural Network for Permanent Magnet Generator

No-Load Losses Based Method to Detect Demagnetisation Fault in Permanent Magnet Synchronous Motors with Parallel Branches

Inter-turn short circuit and demagnetization fault diagnosis of ship PMSM based on multiscale residual dilated CNN and BiLSTM

A Novel Method for Diagnosing Demagnetization Fault in PMSM Using Toroidal-Yoke-Type Search Coil

Automated Monitoring of the Uniform Demagnetization Faults in Permanent-Magnet Synchronous Motors: Practical Methods and Challenges

Diagnostic of Combined Mechanical and Electrical Faults in ASD-Powered Induction Motor Using MODWT and a Lightweight 1-D CNN

Demagnetization Fault Diagnosis of a PMSM for Electric Drilling Tools Using GAF and CNN

Enhancing the Efficiency of Failure Recognition in Induction Machines through the Application of Deep Neural Networks