Abstract:Aluminium metal-matrix composites are broadly employed in industries like aerospace, marine, automobile-sector, and many others, generating a broad research interest. They are preferred for their high strength and low wear rate. This research work is mainly directed towards the fabrication of two types of metal-matrix composite materials using aluminium-alloy 6061(AA6061) as the matrix material and incorporating aluminium oxide (Al 2 O 3 ), aluminium nitride (AlN), and silicon carbide (SiC) as a reinforcement material. AA6061 has been reinforced with Al 2 O 3 and SiC particulates in AS series composites, while AA series composites, AA6061 has been reinforced with Al 2 O 3 and AlN particulates. This hybrid metal composite was constructed using the stir-casting method. These hybrid composites have been investigated for their physical and mechanical characteristics , viz. density, hardness, impact strength , void content, flexural strength, and tensile strength following the ASTM standards. Tribological characteristics of these hybrid composites were performed by Pin-on-disc (POD) tribometer. Taguchi's design of experimental technique was applied taking four factors viz. composition, sliding-velocity (SV), sliding-distance (SD), and load, and each having 4 levels. ANOVA was employed to find out meaningful parameters. SEM analysis of worn-surface was executed to find out the dominant wear mechanism. Experimental density was highest for AS42, and AA42 composites and void content were lowest for the same. Mechanical properties viz. density, hardness, impact strength, void content, flexural strength, and tensile strength were higher than the base alloy. From the response table of Taguchi analysis of AS and AA composite, the load factor significantly impacted the specific wear rate (SWR) to follow filler content (FC). It can be followed from the ANOVA table for AS composite that the load factor had a magnificent impact on the SWR. The SV and SD show no significant effect on SWR.

Wear performance of garnet aluminium composites at high contact pressure

Effect of elevated temperatures and applied pressure on the tribological properties of LM30/sillimanite aluminium alloy composites

Study on Dry Sliding Wear and Friction Behaviour of Al7068/Si3N4/BN Hybrid Composites

Influence of wear parameters on friction performance of A356 aluminum – graphite/ granite particles reinforced metal matrix hybrid composites

Study of Wear Behavior on AA6061 Reinforced with Hybrid Ceramic Composites through Optimization

Mechanical and Sliding Wear Performance of Vacuum-Cast AA7075-Co Alloy Composites: Parametric Optimization and Ranking Analysis

Evaluation of tribological parameters for boron carbide and graphite infused aluminium hybrid composite fabricated by stir casting technique

Abrasive wear behavior of WC nanoparticle reinforced magnesium metal matrix composites

Mechanical and dry sliding tribological characteristics of aluminium matrix composite reinforced with high entropy alloy particles

Effect of Percentage Variation on Wear Behaviour of Tungsten Carbide and Cobalt Reinforced Al7075 Matrix Composites Synthesized by Melt Stirring Method

Dry Sliding Wear Studies on Sillimanite and B4C Reinforced Aluminium Hybrid Composites Fabricated by Vacuum Assisted Stir Casting Process

Experimental tribological and mechanical behavior of aluminium alloy 6061 composites incorporated ceramic particulates using Taguchi analysis

Metallographic Study and Sliding Wear Optimization of Nano Si3N4 Reinforced High-Strength Al Metal Matrix Composites

A comparison of the erosive wear performance of particle reinforced aluminum matrix composites

Influence of Load and Sliding Velocity on Abrasive Wear of Polyester Composites Reinforced with Bio-Particulates as Filler Material

PHYSICO-TRIBOLOGICAL ANND WEAR MECHANISM CHARACTERISTICS OF HYBRID REINFFORCED Al6063 MATRIX COMPOSITES

Wear and friction behaviour of Cu-Gr-B4C composites and correlating to the topographical characteristics

Wear Analysis of Friction Stir Processed AA7075-SiC-Graphite Hybrid Surface Composites

Wear behaviour of aluminium-based hybrid composites processed by equal channel angular pressing

Tribological behavior of sustainable carbon based composite coating for wear resistance applications

Effect of Si3N4 Ceramic Particulates on Mechanical, Thermal, Thermo-Mechanical and Sliding Wear Performance of AA2024 Alloy Composites