Abstract:The effects of salt water exposure at deep ocean depth pressures when coupled with low temperatures on the material characteristics of three unique additively manufactured polymers has been investigated through a detailed experimental approach. The polymers in the study were manufactured utilizing both Vat Photopolymerization and Material Extrusion printing techniques. The Material Extrusion process was utilized to produce material specimens of Stratasys ULTEM 9085 and Markforged Onyx while the Vat Photopolymerization process was used to produce specimens of Accura ClearVue. The ULTEM 9085 and Markforged Onyx are filament based polymers and the ClearVue is a liquid based resin. The specimens were first submerged in a high pressure, salt water bath of 3.5% NaCl solution at 34.5 MPa (5000 lb/in 2 ) for a total exposure time of 60 days to determine the water absorption characteristics. Subsequent to the salt water exposure at high pressure, the specimens were evaluated to determine changes in tension, compression, flexure, and in-plane fracture properties. To determine the effects of water saturation and low temperature coupling, the mechanical testing was performed at temperatures of 20°C, 0°C and -20°C in both dry and saturated conditions. Additionally, non-destructive testing in the form of TeraHertz and FIRT imaging was conducted to analyze the physical material changes through the thickness of the material due to the saline water absorption. To quantify the change in material storage and loss moduli properties, Dynamic Mechanical Analysis (DMA) characterization was performed on each of the AM polymers in dry and saturated states. The DMA testing also quantified changes in the Glass Transition Temperature because of salt water exposure. In summary, The current study investigates the effects of coupled long term/high pressure salt water exposure with low temperatures on the mechanical and material characteristics of three unique AM polymers by: (1) immersing the materials in a salt water solution at 34.5 MPa for 60 days, (2) Conducting post exposure mechanical testing on the materials at 0°C and -20°C with comparisons to 20°C testing on dry specimens, and quantifies changes in material properties through DMA experiments. The results from all testing in the study show that high pressure salt water exposure when coupled with low temperatures has unique effects on each of the materials considered in the study and careful consideration to each parameter must be given based on the material type when components will be employed in marine operations.

Prediction of mechanical property loss in polyamide during immersion in sea water

Micromechanics-based Progressive Failure Analysis of Carbon FIber/epoxy Composite Vessel under Combined Internal Pressure and Thermomechanical Loading

Effect of high pressure salt water absorption on the mechanical characteristics of additively manufactured polymers

Modeling and FE simulation of coupled water diffusion and viscoelasticity in relaxation tests of polyamide 6

Experimental investigation of long-term performance of fiber-reinforced epoxy and polyurethane polymer composites

Experimental study on the behavior of polyamide multifilament subject to impact loads under different soaking conditions

Modelling the Mechanical Behaviours of Glassy Hydrogels

High Pressure Salt Water and Low Temperature Effects on the Material Performance Characteristics of Additive Manufacturing Polymers

Artificial Neural Networks for Predicting Mechanical Properties of Crystalline Polyamide12 via Molecular Dynamics Simulations

Mechanical Performance of Carbon Fiber/Polyamide 6: Comparative Study Between Conditioning in Distilled Water with Heating and Saline Solution

Understanding seawater-induced fatigue changes in glass/epoxy laminates: A SEM, EDS, and FTIR study

Predicting Degradation of Composite-Titanium Adhesively Bonded Joints Exposed to Seawater Environment

Investigating physical behavior of polyacrylamide/polyacrylic acid interpenetrating polymer networks through atomistic molecular dynamics simulations

Modelling Of Hydrothermal Aging Of Short Flax Fiber Reinforced Composites

Studies of wear resistance and antifriction properties of metal-polymer pairs operating in a sea water simulator

A thermo-mechanically coupled constitutive model for semi-crystalline polymers at finite strains: Mechanical and thermal characterization of polyamide 6 blends

Investigation of Water Diffusion Mechanisms in Relation to Polymer Relaxations in Polyamides

Micromechanical Property Study of Nylon 11 and Organoclay Systems for Offshore Flexible Pipe

Hydration, Refinement, and Dissolution of the Crystalline Phase in Polyamide 6 Polymorphs for Ultimate Thermomechanical Properties

An experimental and theoretical investigation on the hyper-viscoelasticity of polyamide 12 produced by selective laser sintering

Accelerated ageing of polylactide in aqueous environments: Comparative study between distilled water and seawater