Abstract:Concrete's widespread use in construction is increasing due to urbanization and population growth. While it offers durability and strength, its production poses environmental challenges. Researchers and global initiatives are working towards more sustainable concrete production methods and effective waste management, particularly for paper waste (WPA) and polyethylene terephthalate waste (PET). This study aims to investigate the effects of waste paper aggregate (WPA) on the flow time, compressive strength, flexural strength, and thermal conductivity of mortars. Furthermore, it explores the potential of polyethylene terephthalate (PET) to enhance the compressive and flexural strengths of these mortars. To conduct this study, the materials were characterized using EDX spectroscopy and SEM analysis. Gwyddion software was employed to conduct a comprehensive analysis of the grain segmentation and microstructural characteristics of the WPA mortars. Subsequently, four distinct mixtures were selected for further investigation. The first mixture involved substituting sand with various percentages of waste paper aggregate (WPA) (1–4%) without PET. The second mixture included WPA (1–4%) and 5% PET. Due to the ineffective plasticizer in the first two mixtures, the third mixture replaced 20% of quarry sand with dune sand (DS) while maintaining the same percentages of WPA and PET as in the previous mixtures. The results indicate that mortars RM1 (0% WPA + 0% PET) and RM2 (0% WPA + 0% PET + 20% DS) demonstrated the best flow time. This suggests that incorporating WPA and PET into the mortar mix can negatively impact its workability, making it more challenging to handle, shape, and apply. Sample PW4, composed of 4% WPA and 0% PET, displayed a significant increase in compressive strength from 46.36 MPa to 49.81 MPa and flexural strength from 10.5 MPa to 11.47 MPa, indicating that incorporating WPA into the mortars can enhance resistance to both compressive and flexural strengths. This same mixture, PW4, demonstrated that the mortars are poor conductors of heat and would be more effective as thermal insulators. Grain segmentation of WPA mortars using Gwyddion software revealed that shorter WPA fibers tend to align with the width, while longer WPA fibers tend to align with the length of the section.

Effects of polypropylene fibre on mechanical properties of fat clay stabilised with sludge ash of wood and paper mill

Effect of Fiber on Mechanical Properties of Cement Stabilized Macadam Mixture

Research about the Effect of Polypropylene Fiber on Mechanical Properties of Curing Sludge

Effect of hybrid type of fibers on the mechanical properties of stabilized sand with coal waste and cement

Effects of Biochar and Polypropylene Fibre on Mechanical Behaviour of Cement‐solidified Sludge

Effect of polypropylene fibre and lime admixture on engineering properties of clayey soil

Strengthening of High Plastic Clays by Geotextile Reinforcement

The effect of polypropylene fibres on the compressive strength, impact and heat resistance of self-compacting concrete

Laboratory evaluation on the effectiveness of polypropylene fibers on the strength of fiber-reinforced and cement-stabilized Shanghai soft clay

Mechanical properties and microscopic characterization of waste perlite powder as supplementary cementitious material

Effect of the addition of polypropylene fiber on concrete properties

Combined Influences of Cement, Rice Husk Ash and Fibre on the Mechanical Characteristics of a Calcareous Sand

Effects of soot and plastic fibers on the performance of SCC

The effects of steel, polypropylene, and high-performance macro polypropylene fibers on mechanical properties and durability of high-strength concrete

Effect of varying water content and extreme weather conditions on the mechanical performance of sludge bricks solidified/stabilized by hemihydrate phosphogypsum, slag, and cement

Evaluating the Mechanical Properties of Fibre-Reinforced Concrete Containing Coconut Palm Leaf Ash as Supplementary Cementitious Material

Synergistic Effects of Polypropylene Fibers and Silica Fume on Structural Lightweight Concrete: Analysis of Workability, Thermal Conductivity, and Strength Properties

Effect of waste paper aggregate and polyethylene terephthalate on mortar performanCE

The Impact of a Large amount of Ultra-fine Sunflower Ash With/without Polypropylene Fiber on the Characteristics of Sustainable Self-compacting Concrete

Hydrological response and crack resistance of polypropylene-fiber reinforced compacted steel slag-bentonite mixtures under wetting-drying cycles

Analysis of Mechanical Properties of Fiber-Reinforced Soil Cement Based on Kaolin