Abstract:In recent years, nanotechnology has been applied to building materials, such as cementitious composites (e.g., mortar and concrete), to improve their properties. The aim of this study was to analyze the thermal, physical, and mechanical properties of mortars with and without silicon-dioxide (SiO2) nanoparticles. Experiments such as thermogravimetry and differential thermal analysis (TG-DTA), X-ray diffraction (XRD), fresh density, incorporated-air content, bulk density, capillary absorption, capillarity coefficient, flexural tensile strength, and compressive strength on prismatic specimens were performed on mortars and analyzed for different levels of nanosilica (nS). These levels were 1% and 3%, in addition to the reference mortar (0% nS). The TG-DTA curves showed an elevated content of chemically combined water and a lower content of calcium hydroxide (Ca(OH)2) in the 3% nS compositions, while the XRD curves presented a lower content of calcite and portlandite in the same mortar. These results indicate the fixation capacity of lime for the formation of calcium silicate hydrate (C-S-H), which is the primary cause of resistance in cementitious mortars. In addition, it was found that the use of nanosilica contributed to a fresh density increase of approximately 15%, which caused a minimum air-incorporated content decrease of 37% and a minimum bulk density increase of 10%. Higher densities resulted in a minimum water absorption reduction of 36%, owing to fewer pores in the mortars. Therefore, the capillarity coefficient decreased by a minimum of 41%. These nanoparticles also improved the minimum flexural tensile and compressive strengths by 88% and 158%, respectively, when using a 3% nS composition. These results can enable the use of lightweight aggregates in cementitious composites, improving their physical and mechanical characteristics and allowing greater reuse of these materials, including construction waste.

Nano-Silicon Dioxide-Optimized Cementitious Composite Material in the Restoration of Concrete Cracks in House Building

Recycled Concrete Intensified by Nano-materials

Effect of nano-silica as cementitious materials-reducing admixtures on the workability, mechanical properties and durability of concrete

Application and Microstructure Properties of Nanomaterials in New Concrete Materials

Experimental Study on the Mechanical Properties of Nano-Silicon-Modified Polyurethane Crack Repair Materials

A Review of the Effect of Nano-Silica on the Mechanical and Durability Properties of Cementitious Composites

Self-healing performance of silica nanoparticle-infused concrete based on microbial mineralization

Effect of nano-SiO2 and nano-CaCO3 on the static and dynamic properties of concrete

Influence of Nano-SiO2 Content on Cement Paste and the Interfacial Transition Zone

Study on the reinforcing mechanisms of nano silica to cement-based materials with theoretical calculation and experimental evidence

Influence of silicon-dioxide nanoparticles in cementitious mortars: verification using X-ray diffraction, thermal analysis, physical, and mechanical tests

Use of cellulose nanomaterials in cementitious composites reinforced with basalt/polymer pellets for repair of concrete

INVESTIGATING THE EFFECT OF NANO SILICA ON THE MECHANICAL PROPERTIES OF HARDENED CEMENT PASTE

The effect of nano-SiO2 on concrete properties: a review

Synergistic effects of CNTs/SiO2 composite fillers on mechanical properties of cement composites

Effects of nanosilica on microstructure and durability of cement-based materials

Nanocomposites Derived from Construction and Demolition Waste for Cement: X-ray Diffraction, Spectroscopic and Mechanical Investigations

Nano-SiO2 Recycled Concrete Anti-Sulfate Performance and Damage Mechanism Research

Durability of Steel Fiber-Reinforced Concrete Containing SiO2 Nano-Particles

Effect of nano-silica@ chitosan phosphate ester on the mechanical properties and water resistance of magnesium oxychloride cement

Back to basics: Nanomodulating calcium silicate hydrate gels to mitigate CO 2 footprint of concrete industry