Abstract:Under the influence of wind and horizontal seismic forces, structures such as piers in curved beam bridges, main arches of steel tube concrete arch bridges, and frame columns may experience combined bending‐torsion stress states, affecting the safe usage of the structure. To investigate the mechanical performance of circular concrete‐filled steel tube(CFST) columns under bending‐torsional coupling, a three‐dimensional solid‐shell finite element model of circular concrete‐filled steel tube columns under various bending and torsion ratios (k) was established using ABAQUS software, and validated with existing experiments on such columns under bending‐torsional loading. Parametric analysis was conducted to explore the trends of interface slip and the restraining effect in circular concrete‐filled steel tube columns under different bending and torsion ratios, analyzing the impact of parameters such as the yield strength of steel, concrete strength, steel content in the cross‐section, and shear–span ratio on the combined bearing capacity. The results of the parametric analysis show that: (1) with the increase of k, the relative slip at the interface between the core concrete and the outer steel tube first increases and then decreases, with interface slip leading to a reduction in the load‐bearing capacity; (2) the relative slip at the interface between the core concrete and the outer steel tube first increases and then decreases, with interface slip leading to a reduction in the load‐bearing capacity; (3) with the increase of k, the circumferential and axial stresses in the steel tube surface of the circular concrete‐filled steel tube columns increase, while the shear stress decreases, leading to a transition in the failure mode of the columns from combined bending‐torsional failure to bending‐shear failure. Based on these findings, a practical calculation formula for the bending‐torsional combined bearing capacity of circular concrete‐filled steel tube columns is proposed, offering high calculation accuracy and serving as a reference for the design of such components.

Bending of an Eccentric Cicular Ring with a Cut-Out Portion by Concentrated Forces at Its Inner Edge

Research and Application of Ring Tensioning Integral Structure

Experimental Investigation of Circular Steel Tubes with Tapered Ends Subjected to Bending,compression and Torsion

Elastic Lateral–torsional Buckling of Circular Arches Subjected to a Central Concentrated Load

Elasticity Solutions of Spherically Isotropic Cones under Concentrated Loads at Apex

ULTIMATE BEARING CAPACITY OF CONCRETE FILLED RECTANGULAR BOX UNDER BIAXIAL BENDING MOMENT AND AXIAL FORCE

Buckling behaviour of imperfect ring-stiffened cone–cylinder intersections under internal pressure

The curved bar subjected to an arbitrarily distributed loading: Another paradox in the two-dimensional theory of elasticity

EXPERIMENTAL STUDY ON CENTRIFUGAL CONCRETE-FILLED STEEL TUBES UNDER BENDING AND TORSION

Stress and strain concentrations in finite-thickness rings under diametrically opposite external loads

Effects of Ringed Stiffener on the Buckling Behavior of Cylindrical Shells with Cutout under Axial Compression: Experimental and Numerical Investigation

Experimental and theoretical analysis for centrifuge concrete filled-steel tubular members subjected to bending-torsion

Elastoplastic torsional rigidity analysis of the centrifugal concrete- filled thin-wall steel tubes

Investigation on bearing resistance of thin-walled circular steel tube subjected to eccentric loading

Analytical solutions of stress distribution within a hollow cylinder under contact interactions

Buckling Analysis of Ring-Stiffened Cylindrical Shells with Cutouts by Mixed Method of Finite Strip and Finite Element

Lifting, Loading, and Buckling in Conical Shells

Elastic Stresses and Limit Bending Moments of Concentric and Eccentric Reducers Subjected to Bending Moments

EFFECT OF ECCENTRICITY ON THEAXIAL CRUSHING BEHAVIOR OFROUND METAL TUBES

Research on the mechanical performance of circular concrete‐filled steel tube columns under bending‐torsional coupling

Calculation of radially inhomogeneous ring loaded with normal and tangential loads