Abstract:Quality of waste tire pyrolysis oil was improved via hydrogenation over NiMo/γ‐Al2O3 or NiW/γ‐Al2O3 catalysts to eliminate PAHs compounds. Simultaneously, organosulfurous compounds was reduced. Under 50 bar initial H2 pressure at 350°C for 6 h, NiMo catalyst exhibited the higher performance for hydrodesulfurization (98.4% sulfur removal) with lower ability for PAHs hydrogenation (66.0% PAHs removal), while NiW catalyst showed a preference for PAHs hydrogenation with lower performance for sulfur elimination (74.2% sulfur removal and 71.1% PAHs removal). Summary This research aimed to improve the quality of waste tire pyrolysis oil (WTPO) via hydrogenation to eliminate polycyclic aromatic hydrocarbons (PAHs), which are classified as toxic compounds or precursors to induce the formation of particulate matter. Given the presence of organosulfurous compounds in WTPO, this research was consisted of two steps. First, the hydrogenation of naphthalene, a model PAH compound, was used to screen for suitable promoters [molybdenum (Mo), tungstate (W), and platinum (Pt)] for nickel‐supported gamma‐alumina (Ni/γ‐Al2O3) catalyst to provide a high sulfur tolerance and high PAH hydrogenation efficiency. Second, the obtained suitable catalysts were applied for the hydrogenation of 50 wt% WTPO solution in decane containing 15 982 ppm PAHs and a 0.75 wt% sulfur content. Although the NiPt/γ‐Al2O3 catalyst exhibited the highest performance with 83.8% naphthalene conversion under 40 bar initial H2 pressure at 350°C for 6 hours, it was less tolerant to the presence of thiophene, one of the organosulfurous compounds found in WTPO. Thus, the NiMo/γ‐Al2O3 and NiW/γ‐Al2O3 catalysts were selected for WTPO hydrogenation. The PAHs hydrogenation and hydrodesulfurization occurred simultaneously in both catalytic systems. Under 50 bar initial H2 pressure at 350°C, the NiMo/γ‐Al2O3 catalyst had a higher ability for hydrodesulfurization (98.4% maximum sulfur removal) than hydrogenation of PAHs (66.0% removal of PAHs), whereas NiW/γ‐Al2O3, with lower acidity, showed a preference for hydrogenation of PAHs (71.1% removal of PAHs) with a lower hydroisomerization efficiency (74.2% sulfur removal). Moreover, the chemical structure of PAHs affected the ability to be eliminated by hydrogenation. PAHs having unsubstituted rings could be easily hydrogenated, while the removal of PAHs containing alkyl substituents in both aromatic rings required severe reaction conditions due to their high steric hindrance for adsorption onto the catalyst active sites.

Hydrotreating of Waste Tire Pyrolysis Oil over Highly Dispersed Ni2P Catalyst Supported on SBA-15

Efficient hydrotreatment of waste tire pyrolysis oil using N-doped biochar loaded with cobalt-molybdenum carbide

Production of cleaner waste tire pyrolysis oil by removal of polycyclic aromatic hydrocarbons via hydrogenation over Ni‐based catalysts

Thermal Behavior, Reaction Pathways and Kinetic Implications of Using a Ni/SiO2 Catalyst for Waste Tire Pyrolysis

Polyoxometalate Catalyzed Oxidative Desulfurization of Diesel Range Distillates from Waste Tire Pyrolysis Oil

Study on the deactivation of Ni-based catalyst in the hydrotreating process of waste plastic pyrolysis oil

A highly loaded and dispersed Ni2P/SiO2 catalyst for the hydrotreating reactions

Fuel and Chemical Properties of Waste Tire Pyrolysis Oil Derived from a Continuous Twin-Auger Reactor

Waste tire derived char supported Ni‐Fe catalyst for catalytic thermochemical conversion of wet municipal solid waste

A Novelty Catalytic Reforming of Tire Pyrolysis Oil for Hydrogen-Rich Syngas

Efficient Synthesis of Nickel-Molybdenum/USY-Zeolite Catalyst for Eliminating Impurities (N, S, and Cl) in the Waste Plastic Pyrolysis Oil: Dispersion Effect of Active Sites by Surfactant-Assisted Melt-Infiltration

Catalytic hydrotreatment of fast pyrolysis oils using Ni-Cu/Al-MCM-41 catalysts

Integration of catalytic fast pyrolysis and hydroprocessing: a pathway to refinery intermediates and “drop-in” fuels from biomass

Effect of Mo promoters on catalytic performance of Ni-based catalyst for hydrogenation of naphthalene derivatives

Synthesis of mesoporous TiO2-Al2O3 composites supported NiW hydrotreating catalysts and their superior catalytic performance for heavy oil hydrodenitrogenation

Structure and Activity of Ni2P/Desilicated Zeolite β Catalysts for Hydrocracking of Pyrolysis Fuel Oil into Benzene, Toluene, and Xylene

Hydrotreatment of bio-oil over Ni-based catalyst

Kinetic analysis of waste tire pyrolysis with metal oxide and zeolitic catalysts

An experimental study of Ni-Mo adsorbent for reactive adsorption desulfurization of spent tire pyrolysis oil modelled using n-hexane and thiophene

A comparative study of the pyrolysis and hydrolysis conversion of tire

Synthesis of nickel phosphide nano-particles in a eutectic mixture for hydrotreating reactions