Abstract:The Ceiling-Fan-Integrated-Air Conditioning (CFIAC) represents an innovative HVAC design, which involves directing supply air towards the vicinity of ceiling fans, facilitating the mixture and distribution of air within a room. By eliminating the need for terminal ductwork and diffusers, CFIAC offers an efficient cooling solution for occupants. This study employs experimental and CFD methodologies to assess various parameters, including airflow, air pollution, and temperature related to this system. Experimental tests were conducted in a controlled chamber, with the lowest inlet air velocity and the temperature, where supply air was projected from a high-sidewall vent directly towards a ceiling fan's centerline. Different operational conditions of the ceiling fan were examined (off, Level 2 and Level 4 downwards, and Upwards). Carbon dioxide (CO 2 ), employed as a tracer gas, was released near a thermal manikin at three distinct locations within the chamber: the middle, lower left, and upper right, and the corresponding CO 2 concentration distributions were evaluated. Additionally, air velocity measurements were collected and analyzed. The effectiveness of ventilation and potential health exposure was quantified using the age of air and intake fraction (IF) metrics. The findings indicate that operating the fan at Level 4 with downward airflow enhances air velocities and heat loss while reducing CO 2 concentrations and age of air by an average of 14% and four minutes, respectively. Moreover, the IF values for Level 4 operations, both downward and upward, were marginally lower compared to those recorded for Level 2 downward and fan-off scenarios, suggesting a decreased risk of cross-infection.

Noise Reduction of a Fan and Air Duct by Using a Plenum Chamber Based on ASHRAE Guidelines

Thinking inside the box: a cost-effective approach to fan array noise reduction

Suppression of broadband noise radiated by a low-speed fan in a duct

Duct quiet zones utilization for an enhancement the acoustical air-condition noise control

Optimization and analysis of the acoustic and resistance performance of the plenum chamber via sample entropy and large eddy simulation

Cooling fan aerodynamic noise reduction with short inlet duct and its applicability

Silencing of the duct noise by using stacked micro-perforated plate with air gaps

Case Study of Applying Active Noise Control on Communication Chassis

Noise reduction and power generation in blower duct using Helmholtz resonator with piezoelectric diaphragm

Uniformity of Supply Air in the Plenum for Under-Floor Air Distribution Ventilation in a Circular Conference Room: A CFD Study

Low Frequency Acoustic Performance in Ducts Using Honeycomb Layer Systems

Noise Reduction Analysis of Electronic Device Cooling Fan With Duct and Its Application Under Variable Working Conditions

AErodynamic Noise Characteristics Of Axial Flow Fan In Narrow Space And Noise Reduction Based On Flow Control

Study on sound pressure level and acoustic damping ratio of one dimensional sound field partitioned by perforated plate with geometric similarity

Noise reduction of heating, ventilating, and air conditioning systems in previously constructed buildings, primarily focusing on health facilities

Fan Noise Reduction by Acoustic Liners Combined with Fine-Perforated-Film: Noise Tests by a Small Turbofan Engine DGEN 380

Design of sinusoidal-shaped inlet duct for acoustic mode modulation noise reduction of cooling fan

Tonal noise reduction of an electric ducted fan using over-the-rotor acoustic treatment

Wideband reduction of in-duct noise using acoustic metamaterial with serially connected resonators made with MPP and cavities

An Integrated Experimental and CFD Analysis of Ceiling-Fan-Integrated Air Conditioning System: Indoor Air Quality and Air Velocity

Control of Flow and Acoustic Fields Around an Axial Fan Utilizing Plasma Actuators