Abstract:Palladium (Pd), a well-known noble metal for its exceptional physical and chemical properties, finds widespread applications in sectors including automotive, hydrogen purification, dentistry, coinage, and jewelry. The growing demand for Pd has led to resource scarcity. This feature necessitated upon the economically and environmentally viable means for the reclamation of the precious metal ions from secondary sources. This article delves into the Pd adsorptive-desorption trends associated with the triethylenetetramine cross-linked chitosan (CH-TETA) derivative in moderately complex solutions. The effect of moderate solution chemistry complexity, incorporating ammonium hydroxide (NH 4 OH) and ethylenediaminetetraacetic acid (EDTA), within the synthetic electroless plating (ELP) solutions was investigated. Batch adsorption experiments were conducted through a variation of process parameters namely solution pH, CH-TETA dosage, adsorption duration, initial Pd concentration, and temperature. CH-TETA demonstrates an impressive Pd adsorption capacity ranging from 43.53 to 117.08 mg g−1 and is correspondingly accompanied by the metal removal efficiency range of 87.05% to 39.03%. Such promising performance has been ascertained for an initial Pd constitution of 50 to 300 mgL−1. Despite constituting other additives in the adsorbate system, utilizing simple acidic and basic eluents, the CH-TETA derivative exhibited a reasonable recovery efficacy of 39.68%. Thereafter, recovery of Pd can be further enhanced into two approaches. In these, the first refers to the utilization of various other methods such as thermal, electrochemical, ultrasound, and microwave-assisted regeneration from spent adsorbents. Secondly, a pre-treatment method can be adopted to remove the additives prior to the adsorption process. In summary, the recovery of precious metal ions from the spent adsorbents has been a challenging task. Based on the discussion, further improvements based on the findings of this article are possible by targeting relevant research methodologies in resin chemistry and regeneration methods.

Effective recovery of some precious metals by using alternative quaternary amine types of anion-exchangers prepared from biofuel-extracted microalgal residues

Dithiooxamide-Immobilized Microalgal Residue for the Selective Recovery of Pd(II) and Pt(IV)

Adsorptive Recovery of Palladium(II) and Platinum(IV) on the Chemically Modified-Microalgal Residue

Recovery of Silver Using Adsorption Gels Prepared from Microalgal Residue Immobilized with Functional Groups Containing Sulfur or Nitrogen

Selectivity of modified pomegranate peel for gold, platinum, and palladium: Adsorption behavior, mechanism, and recovery

Amine-rich Cyclotriphosphazene (P3N3) Nano-Cages for Enhanced and Selective Au(III) and Pd(II) Recovery and Hydrogen Generation: Waste-to-resource Tactics

Efficient recovery of Cr(VI), Au(III), and Pd(II) using physically crosslinked aminoclay/polyvinyl alcohol composite microgels generated by microfluidics

Removal of heavy metal ions (Pb2+, Cu2+, Cr3+, and Cd2+) from multimetal simulated wastewater using 3-aminopropyl triethoxysilane grafted agar porous cryogel

Ionized acrylamide-based copolymer / terpolymer hydrogels for recovery of positive and negative heavy metal ions

Highly selective and straightforward recovery of gold and platinum from acidic waste effluents using cellulose-based bio-adsorbent

Biosorption of Precious Metals Using the Microalga Galdieria

Selective Gold Recovery from Homogenous Aqueous Solutions Containing Gold and Platinum Ions by Aromatic Amino Acid-Containing Peptides

Efficient and selective adsorption of Au(iii), Pt(iv), and Pd(ii) by a radiation-crosslinked poly(ionic liquid) gel

Fe3O4 Nanoparticles Functionalized with Poly(ethylene Glycol) for the Selective Separation and Enrichment of Au(iii)

Evaluation of a triethylenetetramine-chitosan derivative for the removal of palladium ion from an intricate adsorbate system

Selective removals of heavy metals (Pb(2+), Cu(2+), and Cd(2+)) from wastewater by gelation with alginate for effective metal recovery.

Removal of Heavy Metals from Freshwater Using Immobilized Microalgae

Fabrication of amino-functionalized silica hollow nanofibers for removal of heavy metal ions

Efficient Recovery of Rare Earth Elements (Pr(III) and Tm(III)) From Mining Residues Using a New Phosphorylated Hydrogel (Algal Biomass/PEI)

A novel tetraethylenepentamine functionalized polymeric adsorbent for enhanced removal and selective recovery of heavy metal ions from saline solutions

Effect of Bi-Functionalization of Algal/polyethyleneimine Composite Beads on the Enhancement of Tungstate Sorption: Application to Metal Recovery from Ore Leachate