Abstract:This article proposes a novel design framework, EXIT-constrained binary switching algorithm (EBSA), for achieving near Shannon limit performance with single parity check and irregular repetition coded bit interleaved coded modulation and iterative detection with extended mapping (SI-BICM-ID-EM). EBSA is composed of node degree allocation optimization using linear programming (LP) and labeling optimization based on adaptive binary switching algorithm jointly. This technique achieves exact matching between the Demapper (Dem) and decoder's extrinsic information transfer (EXIT) curves while the convergence tunnel opens until the desired mutual information (MI) point. Moreover, this article proposes a combined use of SI-BICM-ID-EM with Doped-ACCumulator (D-ACC) and modulation doping (MD) to further improve the performance. In fact, the use of D-ACC and SI-BICM-ID (noted as DSI-BICM-ID-EM) enables the right-most point of the EXIT curve of the combined demapper and D-ACC decoder (Ddacc), denoted as DemDdacc, to reach a point very close to the (1.0, 1.0) MI point. Furthermore, MD provides us with additional degree-of-freedom in "bending" the shape of the demapper EXIT curve by choosing the mixing ratio of modulation formats, and hence the left most point of the demapper EXIT curve can flexibly be lifted up/pushed down with MD aided DSI-BICM-ID-EM (referred to as MDSI-BICM-ID-EM). Results of the simulations show that near-Shannon limit performance can be achieved with the proposed technique; with a parameter set obtained by EBSA for MDSI-BICM-ID-EM, the threshold signal-to-noise power ratio (SNR) is only roughly 0.5 dB away from the Shannon limit, for which the required computational complexity per iteration is at the same order as a Turbo code with only memory-2 convolutional constituent codes.

EXIT-constrained BICM-ID design using extended mapping

Improved decoding algorithm of bit-interleaved coded modulationfor LDPC code

EXIT-Chart-Matching-Aided Near-Capacity Coded Modulation Design and a BICM-ID Design Example for Both Gaussian and Rayleigh Channels

A Reduced-Complexity Demapping Algorithm for BICM-ID Systems

The Joint Demodulation and Decoding for BICM-ID System with BEC Approximation and Optimized Bit Mapping

Design Of Bicm-Id Systems With Suboptimal Log-Map Decoding Algorithm

A Novel BICM-ID System Approaching Shannon-Limit at High Spectrum Efficiency.

A New Look of Doping Technique in BICM-ID

BICM-ID Systems with Signal Space Diversity over Rayleigh Fading Channels.

Labeling optimization for BICM-ID systems

A New Labeling Search Method for Bit-interleaved Coded Modulation with Iterative Decoding

Design and Analysis of Bit-Interleaved Coded Modulation with Pseudorandom Sequence.

Irregular Mapping and Its Application in Bit-Interleaved LDPC Coded Modulation with Iterative Demapping and Decoding

A capacity-approaching multi-user BICM-ID scheme for multiple access channel

Efficient Receiver Architecture for LDPC Coded BICM-ID System

Mapping Design for $2^{M}$ -Ary Bit-Interleaved Polar Coded Modulation

Ldpc Coded Modulation for Rayleigh Fading Channels

Mapping Design for <inline-formula> <tex-math notation="LaTeX">$2^{M}$ </tex-math></inline-formula>-Ary Bit-Interleaved Polar Coded Modulation

A Progressive Edge Growth Algorithm for Bit Mapping Design of LDPC Coded BICM Schemes.

Low-density hybrid-check coded superposition mapping in BICM-OFDM

Coded Modulation with Signal Space Diversity