Abstract:"Stimulated reservoir volume" (SRV) makes it possible for commercial production of shale gas by means of multistage fracturing of horizontal wells. However, the formation mechanism of effective fracture network has not been well understood. The mechanism of fracture propagation in shale with hydraulic fracturing needs to be further explored, in order to realize the control on morphology of fracture network with SRV and increase the single well production of shale gas. In this article, the true triaxial test system was deployed for horizontal well hydraulic fracturing simulation experiments of shale outcrops for the first time. The effects of multiple factors on propagating rules of fractures of horizontal well in shale with SRV were studied, and the fracture morphology of post- fracturing rock cores was observed for the first time by high- energy CT scanning using the large- scale non- destructive testing system based on linear accelerator. The results show that the influence of flow rate (for SRV) on fracture complexity differs when its value falls in different intervals. When the horizontal in situ stress difference is less than 9 MPa, the hydraulic fracture easily propagates along the natural fractures, forming a fracture network. In this range, when the stress difference is increased, the appearance of the main hydraulic fracture contributes to interconnecting more natural fractures, forming a relatively more complex fracture system. Under the condition of the same horizontal stress difference, if the coefficient of stress difference K-h > 0.25, there is an obvious trend to form single main fracture. The effects of viscosity of fracturing fluid and flow rate on the fracture propagation can be expressed by the parameter q mu . When the order of magnitude of q mu value is 10 (9) N m, it is favorable to the generation of fracture network, but too small or too large values are both harmful. The development and cementing strength of depositional beddings seriously affect the propagating complexity of fracture network with hydraulic fracturing. Refracturing helps to produce some new fractures which are different from the initial ones, and better fracturing effect is achieved. The fracture initiation morphology in perforation fracturing is closely related to the distribution of natural fractures (depositional bedding) around the perforations. If the pressure curve fluctuates significantly, it is indicated that the shale core contains a large number of opened natural fractures or depositional beddings before fracturing, which causes the serious loss of fracturing fluid in the propagation process. (C) 2014 Elsevier Ltd. All rights reserved.

Simulation of multi-cluster fracture propagation by hydraulic fracturing in shale reservoir

Numerical Simulation on Cracked Shale Oil Reservoirs Multi-cluster Fracturing Under Inter-well and Inter-cluster Stress Interferences

The Analysis of Hydraulic Fracture Morphology and Connectivity under the Effect of Well Interference and Natural Fracture in Shale Reservoirs

Numerical simulation of single-cluster and multi-cluster fracturing of hydrate reservoir based on cohesive element

Multiple hydraulic fracture propagation simulation in deep shale gas reservoir considering thermal effects

Numerical simulation of hydraulic fracture propagation in laminated shale reservoirs

Fully Coupled Modeling for Multiple Clusters Growth of Hydraulic Fractures in Shale

Physical Simulation Experiments of Hydraulic Fracture Initiation and Propagation under the Influence of Deep Shale Natural Fractures

Simulation-Based Unitary Fracking Condition and Multiscale Self-Consistent Fracture Network Formation in Shale

Physical Simulation of Hydraulic Fracturing of Shale Gas Reservoir

Study on the fracture propagation law of deep shale reservoir under the influence of different number of fracturing clusters

Study on multi-cluster fracturing simulation of deep reservoir based on cohesive element modeling

Fractures interaction and propagation mechanism of multi-cluster fracturing on laminated shale oil reservoir

Simulation of Key Influencing Factors of Hydraulic Fracturing Fracture Propagation in a Shale Reservoir Based on the Displacement Discontinuity Method (DDM)

Numerical simulation of hydraulic fracture propagation after thermal shock in shale reservoir

Investigation of Natural Weak Interface Properties and Their Impact on Fracture Propagation in Shale Reservoirs

Numerical Simulation of the Simultaneous Development of Multiple Fractures in Horizontal Wells Based on the Extended Finite Element Method

Production performance simulation of a horizontal well in a shale gas reservoir considering the propagation of hydraulic fractures

A FEM-DFN model for the interaction and propagation of multi-cluster fractures during variable fluid-viscosity injection in layered shale oil reservoir

Simulation of the Production Performance of Fractured Horizontal Wells in Shale Gas Reservoirs Considering the Complex Fracture Shape

Experimental Study of Hydraulic Fracturing for Shale by Stimulated Reservoir Volume