Numerical Simulation of the Simultaneous Development of Multiple Fractures in Horizontal Wells Based on the Extended Finite Element Method

Enshun Ping,Peng Zhao,Haiyan Zhu,Yuzhong Wang,Zixi Jiao,Qingjie Zhao,Gan Feng

DOI: https://doi.org/10.3390/en17051057

IF: 3.2

2024-02-24

Energies

Abstract:Simultaneous multiple-fracture treatments in horizontal wellbores have become an essential technology for the economic development of shale gas reservoirs. During hydraulic fracturing, fracture initiation and propagation always induce additional stresses on the surrounding rock. When multiple fractures develop simultaneously, the development of some fractures is limited due to the stress-shadow effect. An in-depth understanding of the multiple-fracture propagation mechanism as reflected by fracture morphology and flow rate distribution can help to set reasonable operation parameters for improving the uniformity of multiple fractures and forming a complex fracture network according to the different in situ stress conditions in a reservoir to increase the shale gas recovery and reduce the cost. In this study, a two-dimensional (2D) fracture propagation model was developed based on the extended finite element method (XFEM). Then, the influences of various factors, including geological and operational factors, on the development of multiple fractures were studied. The results of numerical simulations showed that increasing the cluster spacing or injecting fracturing fluid with lower viscosity can help reduce the stress-shadow effect. In the case of smaller in situ stress differences, the deflection of the fractures was larger due to the stress-shadow effect. As the stress difference increased, the direction of the propagation of the fracture was gradually biased towards the direction of maximum horizontal stress. In addition, the injection rate had some effects on the fracture morphology and flow rate distribution. However, as the injection rate increased, the dominant fracture developed rapidly, and the fracture length significantly increased.

energy & fuels

What problem does this paper attempt to address?

This paper attempts to address the issue of how to reduce the impact of the stress-shadow effect when simultaneously developing multiple fractures in horizontal wells and form a complex fracture network to improve shale gas extraction efficiency and reduce costs. Specifically, the study focuses on the following aspects:

1. **Impact of the stress-shadow effect on fracture development**: During simultaneous multi-fracture fracturing, the middle fractures may be inhibited due to the stress-shadow effect, while the side fractures may overextend and exhibit varying degrees of deviation. Understanding this phenomenon helps optimize operational parameters and improve the uniformity of fracture development.

2. **Impact of geological and operational factors on fracture morphology and flow rate distribution**: Through numerical simulation, the study examines the effects of different geological conditions (such as stress differences) and operational parameters (such as cluster spacing, fracturing fluid viscosity, and injection rate) on multi-fracture development. These factors influence the morphology of fractures and the distribution of fluid within the fractures, thereby affecting the effectiveness of shale gas extraction.

3. **Mechanism of complex fracture network formation**: The research aims to form a complex fracture network by optimizing operational parameters to increase shale gas recovery and reduce extraction costs. A complex fracture network can increase the seepage area of the reservoir, enhancing gas flow and recovery rates.

In summary, this paper explores, through numerical simulation methods, how to reduce the impact of the stress-shadow effect in shale gas reservoirs by optimizing geological and operational parameters, forming a uniform and complex fracture network, thereby improving shale gas extraction efficiency and economic benefits.