Abstract:Using Ultra-High Toughness Cementitious Composite (UHTCC) to the wet joints of composite bridge decks (CBDs) is a new solution to the cracking issue under hogging moments. Interfacial treatments and reinforcement details play a critical role in enhancing the crack resistance performance of wet joints in CBDs, while the quantitative impact of these factors on wet joints utilizing UHTCC materials remains uncertain. In this study, three different wet joint interfacial treatments (surface roughening, smearing epoxy adhesive, applying both) were proposed and the crack resistance performance were investigated through hogging moment tests on CBDs. During the tests, failure modes, flexural capacity, deformation behavior, force mechanism, crack propagation process and strain development of the CBD specimens with different wet joint details were discussed. To investigate the crack resistance performance of different wet joint interfaces, theoretical model for calculating nominal UHTCC tensile stress considering steel/UHTCC interfacial slip was constructed. Subsequently, the development curves of maximum crack width with nominal UHTCC tensile stress at wet joint interfaces were plotted. Test results indicated that interfacial treatment methods exert a distinct influence on the crack resistance performance of wet joints in steel-UHTCC CBDs. For reinforcement-enhanced wet joints, wet joint interfaces can be treated only with surface roughening, and the crack resistance performance was comparable to that treated with the combination of surface roughening and epoxy adhesive. Wet joint interfaces treated with the combination of surface roughening and epoxy adhesive exhibit a smaller value and growth rate of maximum crack width compared to those treated only with epoxy adhesive, and the cracking stresses σ0.05, σ0.1, and σ0.2 at wet joint interfaces were improved by 41.1%, 35.7%, and 232.6%, respectively. The wet joint interfaces in conventional wet joints are recommended to be treated with a combination of surface roughening and epoxy adhesive, resulting in smaller growth rates of interfacial maximum crack width. Moreover, the cracking stresses σ0.1 and σ0.2 at these interfaces were respectively improved by 577.4% and 400% compared to those treated only with surface roughening.

Effect of early strength agent on the properties of new bridge expansion joint UHPC material

Experimental Study and Finite Element Analysis on the Modification of Fast-Hardening Polymer Cement Composite Material Applied to the Anchorage Zone of Expansion Joint

Preparation of polyurethane concrete and its novel application in bridge expansion joint anchorage zone

Fatigue performance of a simply-supported T-beam UHPC bridge deck variable section joint structure

Effect of interface treatment on the flexural performance of existing RC bridge beams strengthened with UHPC

Effect of steel fiber distribution on the mechanical properties of UHPC caused by vehicle-bridge coupling vibration

Flexural Performance of UHPC-Filled Narrow Joints Between Precast Concrete Bridge Slabs

Experimental and numerical studies on shear behavior of prefabricated bridge deck slabs with compact UHPC wet joint

Cost-Effective UHPC for Accelerated Bridge Construction: Material Properties, Structural Elements, and Structural Applications

Experimental Research on Mechanical Properties of Fiber-Reinforced Polyurethane Elastic Concrete (FRPEC)

Effect of High-Strength Concrete on Shear Behavior of Dry Joints in Precast Concrete Segmental Bridges

Experimental and numerical investigations on direct shear performance of UHPC dry joints

Preparation Technology and Experimental Study of Fast-Hardening UHPC Repair Material

Experimental study on the ultimate bearing capacity of damaged RC arches strengthened with ultra-high performance concrete

Bending performance of prefabricated ultra-thin UHPC unit plate reinforced orthotropic steel bridge decks

Experimental and analytical studies on direct shear performance of UHPC keyed joints

Study on static load test of simply supported hollow slab bridge flexural strengthened with polyurethane–cement composite

Study on Flexural and Shear Behavior of UHPC Rhombus-Strip-Shaped Joint

Strengthening of a Reinforced Concrete Bridge with Polyurethane-cement Composite (PUC)

Comparative Studies of the Effect of Ultrahigh-Performance Concrete and Normal Concrete As Repair Materials on Interfacial Bond Properties and Microstructure

Effect of Interfacial Treatments on Wet Joints Performance in Steel-Uhtcc Composite Bridge Decks