Abstract:Implemented in the frequent extreme rainstorms, aggravation of non-point source pollution, and complex drainage system of urban built-up area, sponge facility practices often intertwine with a very large number of hydro-environmental and socio-economic considerations and constraints. Due to the lack of basic and measured data, fragmented engineering design, more systematic and strategic approaches to address this multi-scale, and multi-parameter problem of practice allocation should be planned and optimized. In this study, a practical quantitative calculation method of stormwater regulation capacity in urban built-up areas is proposed. The details are as follows: the sub-catchment areas are divided by using the drainage pipe section editing function of Auto CAD and the regional analysis function of ArcGIS, and the stormwater regulation capacity in study area to be reconstructed is divided into four grades to define the water-sensitive areas according to the comprehensive runoff coefficient (α), which were excellent (α < 0.6), good (0.6 ≤ α < 0.7), medium (0.7 ≤ α < 0.8), and poor (α ≥ 0.8). The stormwater regulation capacity of green spaces is determined by empirical model calculation and soil moisture hydrograph field measurement. The measured soil saturated hydraulic conductivity in the study area was about 110 mm/h. The drainage capacity of the pipe networks was determined by the length of the overloaded pipe section. Under the conditions of 10a and 50a rainfall return period and 3-h rainfall duration simulated by SWMM, the length of the overloaded pipe section accounts for 33.0% and 40.8% of the total, respectively. Based on the identification of water-sensitive areas in urban high-density built-up areas, the quantitative calculation method of stormwater runoff regulation capacity was constructed through the calculation of the coupling coordination degree of "source-midway-terminal" infrastructures and the layout of storage tanks in the overloaded pipe section. These can estimate the current situation of stormwater regulation capacity of different sizes in urban built-up areas and formulate the optimized planning scheme of sponge reconstruction projects.

Analysis of the Inflow Characteristics of Separate Sewer Systems for Rainfall Using an XP-SWMM Model and the SSOAP Toolbox

Assessment and Pathway Determination for Rainfall-Derived Inflow and Infiltration in Sanitary Systems: a Case Study

Sensitivity Analysis of Parameters of Storm Water Management Model with Sobol Method

Analysis and evaluation of a sewage network during heavy rains using the SSOAP toolbox

Quantifying Rainfall-Derived Inflow and Infiltration in Sanitary Sewer Systems Based on Conductivity Monitoring

Rainfall Derived Inflow and Infiltration Modeling Approaches

Influence of Sewershed Characteristics on Rainfall‐Derived Inflow and Infiltration

Estimating rainfall-induced inflow and infiltration in a sanitary sewer system based on water quality modelling: which parameter to use?

Quantifying Nonstorm-Water Discharges to Storm-Water Systems with Model Analysis

Rapid quantification of the surface overflow and underground infiltration in sewer pipes based on computer vision and continuous optimization

Data-driven methodological approach for modeling rainfall-induced infiltration effects on combined sewer overflow in urban catchments

Modeling Analysis of Wet-Weather Inflow of Shanghai's Combined Sewerage Treatment Project Phase Ⅰ

Cost-effective Locating Inappropriate Rainfall Inflow into Urban Sewer Network

Construction and Application Analysis of SWMM Model in Beijing Future Science Park

Analysis of Effects of Spatial Distributed Soil Properties and Soil Moisture Behavior on Hourly Streamflow Estimate through the Integration of SWAT and LSM

Impacts of Storm Characteristics on Generating Sanitary Sewer Overflow (SSO) Events for an Urban Sewershed

Influence of Routing Methods on Outflow of SWMM Model

Quantitative calculation of stormwater regulation capacity and collaborative configuration of sponge facilities in urban high-density built-up areas

[Characteristics of Rainfall and Runoff in Urban Drainage Based on the SWMM Model.]

Effect of Rainfall Characteristics on the Sewer Sediment, Hydrograph, and Pollutant Discharge of Combined Sewer Overflow

Parameter Identification and Validation of SWMM in Simulation of Impervious Urban Land Surface Runoff