Abstract:Bioretention has been widely used in China for the purpose of sponge city construction. In subtropical climate areas, the performance of bioretention cell under condition of low infiltration underlying soil and heavy storms is still poorly understood. This study aimed to assess the effects of low infiltration underlying soil and precipitation characteristics on the hydraulic performance of a bioretention cell using the Storm Water Management Model (SWMM). The hydraulic performance of a bioretention cell were investigated under a Typical year rainfall event (P(total) (total precipitation) = 1299.2 mm) and seven heavy storms (i.e., Ptotal range from 53.1 mm to 287.3 mm), at different SF(i) (seepage rates of the underlying soil) (i.e., range from 2.5 mm/h to 15 mm/h). Then, sensitivity of the optimal design to the different design parameters, including the hydraulic conductivity of soil medium layer and the berm height of surface layer, was examined. The results show that the increase in SF(i) was effective in increasing the ARVR(i) (annual runoff volume reduction) and RVR(i) (runoff volume reduction), while little effective in increasing PFR(i) (peak flow reduction). Moreover, the ARVR(i) could meet the designed goal of 70% when the SF(i) was more than 7.5 mm/h. For RVR(i), the key variable of precipitation characteristic changes from Ptotal to P4h(max) (maximum precipitation in 4 h) as SF(i) increases, while P4h(max) remains as the key variable for PFR(i) all the time. The sensitivity studies demonstrate that the hydraulic conductivity is more effective in increasing PFR(i) than the berm height. For the bioretention cell under condition of low infiltration underlying soil and heavy storms, in order to simultaneously achieve expected reduction goal of both peak flow and runoff volume, and make the best comprehensive performance of bioretention cell, it requires not only a maintenance action to increase the hydraulic conductivity of soil medium layer, but also a drain pipe to be added in the storage layer, and meanwhile other LID practices should be combined.

Assessment and Pathway Determination for Rainfall-Derived Inflow and Infiltration in Sanitary Systems: a Case Study

Potential Intrusion of Contaminants into Water Distribution Systems during Pressure Transients: A Case Study in Jiaxing, China

Urban Flood Risk Assessment Using Storm Characteristic Parameters Sensitive to Catchment-Specific Drainage System

Total and Settling Velocity-Fractionated Pollution Potential of Sewer Sediments in Jiaxing, China

Quantifying Rainfall-Derived Inflow and Infiltration in Sanitary Sewer Systems Based on Conductivity Monitoring

The role of inflow and infiltration (I/I) in urban water balances and streamflow regimes: A hydrograph analysis along the sewershed‐watershed continuum

Community Scale Assessment of the Effectiveness of Designed Discharge Routes from Building Roofs for Stormwater Reduction

Approach for evaluating inundation risks in urban drainage systems

Calculation of Intercepted Runoff Depth Based on Stormwater Quality and Environmental Capacity of Receiving Waters for Initial Stormwater Pollution Management

Characterization and sources apportionment of overflow pollution in urban separate stormwater systems inappropriately connected with sewage

Analysis of the Inflow Characteristics of Separate Sewer Systems for Rainfall Using an XP-SWMM Model and the SSOAP Toolbox

Online Storage Technology of the Separate Sewage System: Demonstration Study in a Typical Plain River Network City

Uncertainty Analysis of Pollutant-Hydrograph Model in Assessing Inflow and Infiltration of Sanitary Sewer System

Evaluation for the Contribution of Different Surface Runoff to the Pollution of Wet Weather Flows in Storm Sewers

Assessment of the service performance of drainage system and transformation of pipeline network based on urban combined sewer system model

Quantitative calculation of stormwater regulation capacity and collaborative configuration of sponge facilities in urban high-density built-up areas

A data-driven method for estimating sewer inflow and infiltration based on temperature and conductivity monitoring

A case in subtropical climate city: Assessing the bioretention hydraulic performance on storm in response to poor permeability soil

Rainstorm-induced flood risk assessment in developed urban area using a data-driven approach with watershed units

Estimation of infiltration and inflow due to precipitation in a sewage basin

Characteristics of the overflow pollution of storm drains with inappropriate sewage entry