Abstract:Composite Overwrapped Pressure Vessels (COPVs) are widely used in fields including aeronautics and by companies such as SpaceX to hold high pressure fluids. They are favored for these applications because they are far lighter than all-metal vessels, although they demand special design, manufacturing, and testing requirements. In this study, finite element modeling was used to conducted stress and damage assessments on a composite overwrapped pressure vessel that has a 4 mm thick aluminum core cylinder. To develop the optimum COPV, the lamina sequences, thickness, and fiber winding angle were considered. The relationship between these variables and the composite-overwrapped structure’s maximum burst pressure bearing capacity was assessed. The ABAQUS composite modeler was used to design and generate 14 models of COPVs from carbon fiber/epoxy plies with a consistent thickness of 6.5 mm and various fiber angle orientations. The effects of the ply stacking order were analyzed by the finite element analysis approach for all designed models, which had 13 layers of uniform thickness but a varying fiber orientation. A ply stacking sequence of [55°, −55°] PP winding pattern had an optimum COPV design profile, with a burst pressure bearing capacity of 24 MPa. The stress–strain distribution along the geometry of the COPV was also obtained using the finite element method, and it was found that the distribution is uniform over the surface of the COPV and that its peak values are found towards the polar boss section of the COPV. Extreme stress gradients were noticed when the boss nears its geometrical transition to the dome phase. This factor is evident from the change in the ply thickness caused by the overlapped fiber orientation. The results obtained from this study are useful for the design and application of composite overwrapped pressure vessels.

Development of Abaqus WCM plugin for progressive failure analysis of type IV composite pressure vessels based on Puck failure criterion

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Micromechanics-based Progressive Failure Analysis of Carbon FIber/epoxy Composite Vessel under Combined Internal Pressure and Thermomechanical Loading

Progressive failure analysis of 2D woven composites at the meso-micro scale

Mechanical Analysis and Optimal Design for Carbon Fiber Resin Composite Wound Hydrogen Storage Vessel With Aluminum Alloy Liner

Thermal-fluid-structure Coupling Progressive Failure Analysis for the Type III Composite Cylinder under Localized Fire

Experimental Analysis on Residual Performance of Used 70 MPa Type IV Composite Pressure Vessels

Progressive Failure Analysis and Burst Mode Study of Type IV Composite Vessels

Micromechanics-based Burst Failure Analysis of Composite Vessel Used for Hydrogen Storage

Design of Type-IV Composite Pressure Vessel Based on Comparative Analysis of Numerical Methods for Modeling Type-III Vessels

Damage Modeling and Failure Analysis of Glass Fiber-Reinforced Composite Cylindrical Laminates Using Continuum Damage Mechanics

Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure

Prpgressive Failure Analysis of Composite Overwrapped Pressure Vessels

Progressive damage analysis for multiscale modelling of composite pressure vessels based on Puck failure criterion

Continuum damage modeling and progressive failure analysis of a Type III composite vessel by considering the effect of autofrettage

A numerical and experimental study on mechanical behaviours of type III composite vessels with different lay-up sequences

Stress and Damage Analyses of Composite Overwrapped Pressure Vessel

Finite Element Analysis of Progressive Failure and Strain Localization of Carbon Fiber/Epoxy Composite Laminates by ABAQUS

Progressive Damage Behavior of Composite L‐stiffened Structures with Initial Delamination Defects under Uniaxial Compression: Experimental and Numerical Investigations

Prediction of Residual Burst Strength for Composite Pressure Vessels after Low Velocity Impact

Composite Overwrapped Pressure Vessel Design Optimization Using Numerical Method