Abstract:This paper presents a numerical approach to simulate sliding friction between engineering surfaces with 3D roughness in point contacts. The numerical approach is developed on the basis of the deterministic solutions of mixed lubrication, which is able to predict the locations where the asperity contacts occur, and the pressure distribution over both lubrication and contact areas. If the friction coefficients over the contacting asperities have been determined, total friction force between the surfaces can be calculated by summing up the two components, i.e., the boundary friction contributed by contacting asperities and the shear stress in hydrodynamic regions. The fi-ictions from asperity contact were determined in terms of a limiting shear stress or shearstrength of boundary, films while the fluid shear stress in the lubrication areas was calculated using different rheology models for the lubricant, in order to find which one would be more reliable in predicting fluid tractions. The simulations covered the entire lubrication, regime, including full-film Elastohydrodynamic Lubrication (EHL), mixed lubrication, and boundary lubrication. The results, when being plotted as a function of sliding velocity, give a Stribeck-type friction curve. This provides an opportunity to study friction change during the transition of lubrication conditions and to compare friction performance oil different rough surpces, which is of great value in engineering practice. Experiments were conducted on a commercial test device-universal material tester (UMT) to measure friction at a fixed load but different sliding velocities in reciprocal or rotary motions. The results also give rise to the Stribeck friction curvesfor different rough surfaces, which are to be compared with the results from simulations. The samples were prepared with typical machined surfaces in different roughness heights and textures, and in point contacts with steel ball. Results show that there is a general agreement between the experiments and simulations. It is found that surface features, such as roughness amplitude and patterns, may have a significant effect on the critical speed of transition firom hydrodynamic to mixed lubrication. It? the regime of mixed lubrication, rougher samples would give rise to a higherfiriction if the operation conditions are the same.

Numerical simulation of noise induced by contact between two rough surfaces

Direct numerical simulation of the dynamics of sliding rough surfaces

Numerical simulation of friction noise

Numerical Analysis for the Elastic Contact of Real Rough Surfaces

Numerical Simulation of 3D Rough Surfaces and Analysis of Interfacial Contact Characteristics

Nonlinear Response of Contact Interface with Nanoscale Fractal Roughness under Harmonic Excitation for Jointed Structures

Experiments and numerical results on nonlinear vibrations of an impacting hertzian contact. Part 2: random excitation

Modeling the line contact on an elastic half-space with the statistical approach: Self-affine fractal roughness and numerical framework

Effects of Surface Roughness on Sliding Friction in Lubricated-Point Contacts: Experimental and Numerical Studies

Analysis of the Rolling Interface Contact Characteristics in Mixed Lubrication Based on Gaussian Distribution Theory

Investigation of inclined planar rough surfaces contact from static to sliding

Effect of Surface Roughness on Nanocontact: Quasicontinuum Simulation

Study on Vibration Mechanism Induced by Skidding in Pure Rolling Contact

Frictional Contacts Between Rough Grains With Fractal Morphology

Numerical Characterization and Contact Performances for 3D Rough Surfaces

Simulation of Rolling Noise Based on the Mixed Lagrangian–Eulerian Method

A Fully Coupled Normal and Tangential Contact Model to Investigate the Effect of Surface Roughness on the Partial Slip of Dissimilar Elastic Materials

Simulations And Measurements Of Sliding Friction Between Rough Surfaces In Point Contacts: From Ehl To Boundary Lubrication

Investigation on dynamics performance of multibody system with rough surface

Effects Of Angular Motion On Planar Rough Surfaces Contact From Static To Sliding

Squeal Noise of Friction Material With Groove-Textured Surface: An Experimental and Numerical Analysis