Abstract:Recycling methane from ventilation air is an effective means of reducing greenhouse gas emissions, improving gas utilization efficiency, and developing green mines. Regenerative oxidation properties of ventilation air methane (VAM) blending with dimethyl ether (DME) in a thermal reverse flow reactor were investigated. By analyzing the operating conditions, the influence of key process parameters on methane conversion was determined. The results showed that the addition of DME could greatly shorten the ignition delay time, lower the ignition temperature, and significantly enhance methane conversion. The initial temperature had the greatest influence on methane conversion, followed by methane concentration, whereas the effect of VAM flow on methane oxidation does not increase with an expanded flow rate, and there is an optimal flow rate range adapted to the reactor size. Additionally, methane conversion increases gradually as the equivalent ratio increases, but the temperature field does not change noticeably. Furthermore, understanding the reaction characteristics and mechanism of the CH4/DME mixture is critical for improving methane conversion and thermal utilization efficiency. Temperature sensitivity and rate of production during the oxidation process were analyzed, which revealed that R145 and R1 show positive effects, while R189 and R146 have an inhibitory effect at different DME mixing ratios and initial temperatures. For OH, the most significant promotional reaction was R1, while R27 had the reverse effect. In general, regenerative oxidation of the VAM/DME mixture contributes to an increase in methane conversion and stability of the self-sustaining operation of the system. Therefore, it is feasible to recover the thermal energy produced during the oxidation process for comprehensive utilization. This technology is of great practical importance for the improvement of methane utilization rates and the promotion of the objective of zero gas emissions in coal mines.

Investigations on the mitigation of ventilation air methane and energy recovery in site trial thermal flow-reversal reactor

Study on Dynamic Heat Extraction Characteristics of Heat Exchanger Tube Embedded in Thermal Flow Reverse Reactor for Heat Recovery

Demonstration and its validation for ventilation air methane (VAM) thermal oxidation and energy recovery project

Study on the Performance of a Novel Waste Heat Recovery System at Low Temperatures

Improvement of Thermal Performance of Novel Heat Exchanger with Latent Heat Storage

Strategies for heat recovery in a reverse flow reactor designed to lessen coal mine methane emissions test

A control strategy of flow reversal with hot gas withdrawal for heat recovery and its application in mitigation and utilization of ventilation air methane in a reverse flow reactor

Analysis of the Effects of Structural Parameters on the Thermal Performance and System Stability of Ventilation Air Methane-Fueled Reverse-Flow Oxidation Reactors

Numerical Analysis of Moisture and Gas Transport in Earthen Final Covers Considering Effects of Vapor and Temperature Gradient

Combustion Characteristics of Ventilation Air Methane Blending with Dimethyl Ether in a Thermal Reverse Flow Reactor

Site Trials and Demonstration of a Novel Pilot Ventilation Air Methane Mitigator

Influence of Torrefaction on Biomass Gasification Performance in A High-Temperature Entrained-Flow Reactor

Demonstration of mitigation and utilization of ventilation air methane in a pilot scale catalytic reverse flow reactor

Experimental Research on the Thermal Oxidation of Ventilation Air Methane in a Thermal Reverse Flow Reactor

Thermodynamic Assessment of Heat Recovery from a Fluidized-Bed Ventilation Air Methane Abatement Unit

Three-dimensional Numerical Study on Finned Reactor Configurations for Ammonia Thermochemical Sorption Energy Storage

Design and Performance Investigation of a Compact Catalytic Reactor Integrated with Heat Recuperator

Innovative Fixed-Bed Reactor Integrated with Heat Transfer System for Lean Methane Mixture Removal

Energy recovery from ventilation air methane via reverse-flow reactors

Numerical modelling of the operational effects on the thermochemical reactor performance