Abstract:A pre-sampling isotope dilution-direct injection-liquid chromatography tandem mass spectrometry (DI-LC/MS/MS) analytical method for the analysis of perfluorinated compounds (PFCs) in water is presented. This pre-sampling isotope dilution method incorporates stable isotope internal standards (ISs) and surrogate recovery standards (SRSs) added to sample bottles prior to sample collection. Pre-sampling isotope dilution corrects for PFC adsorption losses and enables a simple quantitative DI-LC/MS/MS water method with a 28 day sample holding time. Method analytes include perfluorinated carboxylic acids (PFCAs) (C4–C12), perfluorinated sulfonic acids (PFSAs) (C4, C6, and C8), perfluorooctane sulfonamide (PFOSA), and four SRSs ([2,3,4-13C3]PFBA, [1,2,3,4-13C4]PFOA, [1,2,3,4-13C4]PFOS, and [1,2-13C2]PFUnA). At 28 day sample holding times, mean recoveries of laboratory reagent water samples (Milli-Q™ water containing hardness at 165 mg equivalent CaCO3 L−1) fortified with the PFC method analytes at 0.2–40 ng mL−1 (0.1–1 ng mL−1 SRSs) are 94.9–115% with relative standard deviations of 0.97–7.9%. At 28 day sample holding times in fortified laboratory reagent water samples, single laboratory lowest concentration minimum reporting levels of 0.010–0.020 ng mL−1 (0.075 ng mL−1 PFBA) are demonstrated for method analytes and SRSs. Method applications to synthetic chlorinated drinking water samples and three environmental sample matrices are presented that demonstrate method ruggedness. Mean recoveries of synthetic chlorinated drinking water samples fortified with the PFC method analytes at 0.1–10 ng mL−1 and SRSs at 0.1–1 ng mL−1 are 97.8–113% with relative standard deviations of 2.0–18%. Mean recoveries and relative standard deviations in environmental groundwater samples, production facility non-contact cooling water effluent samples, and production facility wastewater treatment effluent samples fortified with the PFC method analytes at 0.25–2.5 ng mL−1, 0.25–10 ng mL−1, 0.25–50 ng mL−1 respectively and SRSs at 0.1 ng mL−1 are 100 ± 7.7% (RSD ± 12%, PFBA ± 23%), 100 ± 5.5% (RSD ± 11%), 100 ± 5.2% (RSD ± 11%) respectively. Excellent method correlation was obtained with USEPA Method 537 in a comparative analysis of synthetic chlorinated drinking water samples aged 7 days and fortified with C6–C12 PFCAs and C4, C6, and C8 PFSAs, and three SRSs [13C4]PFOA, [13C2]PFUnA, and [13C4]PFOS at 0.1 ng mL−1. The average absolute difference between the EPA Method 537 and DI-LC/MS/MS measurements for the method analytes and SRSs was 8%.

Certified calibration solution reference material for the determination of perfluorooctane sulfonate from the National Metrology Institute of Japan (NMIJ)

Recent advances in the analysis of per- and polyfluoroalkyl substances (PFAS)-A review

Mineral oil certified reference materials for the determination of polychlorinated biphenyls from the National Metrology Institute of Japan (NMIJ)

Method and validation for the analysis of perfluorinated compounds in water by pre-sampling isotope dilution-direct injection-LC/MS/MS

Determination of perfluorinated alkyl acid concentrations in biological standard reference materials

Nonderivatized Method for the Detection of Perfluoroalkane Sulfonyl Fluorides by Liquid Chromatography-Microwave Plasma Torch Ionization Mass Spectrometry

Polyfluorinated substances in abiotic standard reference materials

Analysis of Perfluorooctanesulfonate Isomers and Other Perfluorinated Alkyl Acids in Serum by In-Port Arylation Gas Chromatography Negative Chemical Ionization–Mass Spectrometry

A High-Throughput Small Volume Matrix Based Calibration using Isotope Dilution Liquid Chromatography Tandem Mass Spectrometry Analysis for 42 Per and Polyfluoroalkyl Substances in Groundwater

Mass spectral studies of perfluorooctane sulfonate derivatives separated by high-resolution gas chromatography.

Liquid chromatography/mass spectrometry method for determination of perfluorooctane sulfonyl fluoride upon derivatization with benzylamine.

Study on the Content Analysis of PFOA and PFOS Residues in Fluorine Polymer

Consolidating LC×LC-HRMS/MS Technique for the Non-targeted Analysis of Poly- And Perfluorinated Substances: a Trial on Aqueous-Film Forming Foams.

A Sensitive Method for Simultaneous Determination of 12 Classes of Per- and Polyfluoroalkyl Substances (pfass) in Groundwater by Ultrahigh Performance Liquid Chromatography Coupled with Quadrupole Orbitrap High Resolution Mass Spectrometry.

Consolidating two-dimensional liquid chromatography–high-resolution tandem mass spectrometry (LC×LC-HRMS/MS) technique for the non-targeted analysis of poly- and perfluorinated substances: A trial on aqueous film-forming foams

External Liquid Calibration Method for Iodide Chemical Ionization Mass Spectrometry Enables Quantification of Gas-Phase Per- and Polyfluoroalkyl Substances (PFAS) Dynamics in Indoor Air

Communicating Confidence of Per- and Polyfluoroalkyl Substance Identification via High-Resolution Mass Spectrometry

"Forever chemicals" detection: A selective nano-enabled electrochemical sensing approach for perfluorooctanoic acid (PFOA)

Development of apple certified reference material for quantification of organophosphorus and pyrethroid pesticides

Quantitative assessment of poly- and perfluoroalkyl substances (PFASs) in aqueous film forming foam (AFFF)–impacted soils: a comparison of analytical protocols

Purity Assessment of Tripropyl Phosphate through Mass Balance and 1H and 31P Quantitative Nuclear Magnetic Resonance