Abstract:Drilling into deep formation characterized by high formation and hydrostatic pressures often brings great challenges to oil and gas industry and the phenomena, such as bit slip, balling and cutter wear, are easy to be exposed. Therefore, it is very important to conduct rock-breaking experiments under high confining and hydrostatic pressures and understand the cutter–rock interaction behaviour for revealing the rock-breaking mechanism of Polycrystalline Diamond Compact (PDC) cutter. In this paper, granite, sandstone and shale were used to carry out PDC cutter cutting experiments under confining and hydrostatic pressures. Cutting force, mechanical specific energy (MSE), cuttings, cutting grooves and energy change were comprehensively analyzed when rock suffers different failure modes under different cutting conditions. The results show that hydrostatic pressure significantly increases the cutting force and MSE compared with cutting results under atmospheric pressure. In addition, different lithology of rocks leads to the different changing trends of cutting force with hydrostatic pressure and affects the pore pressure and differential pressure under hydrostatic pressures. Besides, the smoother cutting grooves and fragmentary cuttings are obtained with increased hydrostatic pressure during cutting and the mud phenomenon of cuttings is witnessed. Furthermore, the fluctuation of cutting force curve and the number of peaks and valleys in cutting force curve reveal the failure behaviour and energy change of rock during cutting. In general, the distance between peaks or valleys is small and more peaks and valleys are obtained when rock suffers ductile failure. Meanwhile, the energy absorption time of rock is shorter and the small-sized cuttings are obtained. Conversely, the distance between peaks or valleys is large and less peaks and valleys are produced when rock suffers brittle failure and the energy absorption time of rock is longer and large-sized cuttings are obtained. Although hydrostatic pressure tends to change the failure mode of rock from brittle to ductile, the number of peaks and valleys in the cutting force curves obtained under hydrostatic pressures is less. The experimental results provide a new understanding of the failure behaviour of rocks and cutter–rock interaction under different cutting conditions.

Hard Rock Fragmentation in Percussion Drilling Considering Confining Pressure: Insights from an Experimental Study

Theoretical and Experimental Study on Single Spherical Button Penetration into Granite Rock Under Dynamic Impact Loading

Micro-macro fracture mechanism of heterogeneous granite in percussive drilling

Effect of confining pressure on damage accumulation of rock under repeated blast loading

Experimental Study of the Rock Cutting Mechanism with PDC Cutter Under Confining Pressure Condition

Experimental and numerical investigation on rock fracturing and fragmentation under coupled static pressure and blasting

The Rock Fragmentation Mechanism in Rock Cutting with PDC Cutter Under Hydrostatic Pressures

Influence of confining pressure on rock fracture propagation under particle impact

Experimental Investigation of the Influence of Confining Stress on Hard Rock Fragmentation Using a Conical Pick

Experimental study on revealing the mechanism of rockburst prevention by drilling pressure relief: status-of-the-art and prospects

Failure characteristics and pressure relief effectiveness of non-persistent jointed rock mass with holes

Numerical study on the dynamic fragmentation of rock under cyclic blasting and different in-situ stresses

Numerical Investigation of the Effect of Pre-induced Cracks on Hard Rock Cutting Using Finite Element Analysis

Experimental study on the characteristics and mechanism of high-pressure water jet fracturing in high-temperature hard rocks

Experimental investigation of the intensity and conditions for strainburst triggering in intact hard rocks

Experimental and numerical studies of the impact breakage of granite with high ejection velocities

Improving the Accuracy of Fracture Toughness Measurement in Burst Experiments

Dynamic mechanical responses and failure characteristics of fractured rocks with hydrostatic confining pressures: An experimental study

Estimation of mechanics parameters of rock in consideration of confining pressure using monitoring while drilling data

Study on multi-scale damage and failure mechanism of rock fracture penetration: experimental and numerical analysis

Investigation on Rock Fracturing in Presplit Blasting Under Various Initial Stresses