Abstract:In this paper, we present a global tribological approach of friction dry contact polymer with SGF on steel, in terms of consequences on metallic surface condition (comparative wear coefficients of polished steel surface) based on extensive experimental determinations between the value and the evolution of the friction coefficient, wear of steel surfaces and contact temperature, in the case of linear dry contact, for thermoplastic material reinforced with short glass fibers (SGF) and various steel surfaces. The aim was to highlight the evolution of the wear process depending on the friction coefficient, as well as the dependence of the loading wear and the sliding speed. Wear depth and volume were calculated based on the “wear imprint” method. As a result, it was possible to graphically illustrate the evolution of the friction coefficient, of the contact temperature, and the change of the wear process, emphasizing the abrasive, adhesive and corrosive wear. The evolution of the plastic material transfer function of the contact temperature, namely of the power lost by friction was highlighted. It has been demonstrated that in the case of a 30% SGF content it can reach and even exceed contact temperatures very close to the yield limit of the plastic material. The influence of the normal load and sliding speed was evaluated in detail. The influence of SGF content, normal load, relative sliding speed and contact temperature over the metal surface wear and over the nature of wear mechanism was recorded. The reaction to wear of different steel surfaces in linear dry friction contact on polymers with SGF (polyamide + 20% SGF, polyamide + 30% SGF and polycarbonate with 20% SGF), observing the friction influence over the metallic surfaces wear. The paper includes also its analysis over the steel’s wear from different points of view: the reinforcement content influence and tribological parameters (load, contact pressure, sliding speed, contact temperature, etc.). Thus, authors' findings related to the fact that the abrasive component of the friction force is more significant than the adhesive component are presented, which generally is specific to the polymers’ friction. Authors’ detections also state that, in the case of the polyamide with 30% glass fibres, the steel surface linear wear rate order are of 10 -4 mm/h, respectively the order of volumetric wear rate is of 10 -6 cm 3 /h. The resulting comparative volumetric wear coefficients are of the order (10 -11 to 10 -12 ) cm 3 /cm and respectively linear wear coefficients of 10 -9 mm/cm.

COMPARATIVE STUDY ON THE FRICTION CHARACTERISTICS OF TWO POLYMERIC MATERIALS SLIDING INTO ENVIRONMENTS DRIED OR LUBRICATED WITH OIL

ASSESSMENTS ON THE FRICTION AND WEAR BEHAVIOR OF SOME POLYMERIC MATERIALS USED IN SLIDING CONTACTS

Comparative Study on the Frequency and Wear of Thermoplastic Polymeric Materials Based on PTFE

FRICTION PROCESSES OF SELECTED POLYMERS SLIDING ON STEEL AND DURALUMIN IN A LUBRICANT ENVIRONMENT

Tribological Behaviors of Several Polymer–polymer Sliding Combinations under Dry Friction and Oil-Lubricated Conditions

Tribological Analysis of Engineering Plastics/Steel Friction Pairs

Tribological characteristics of polymer materials used for slide bearings

Investigation of Tribological Properties of PI/FEP Laminated Composites Under Dry Sliding, Water- and Oil-Lubricated Conditions

ANALYTICAL STUDY OF DURABILITY AND CONTACT CHARACTERISTICS OF METAL-POLYMER COMPOSITE SLIDING BEARINGS FOR MEANS OF TRANSPORT

Experimental Investigation of the Tribological Behaviors of Carbon Fiber Reinforced Polymer Composites under Boundary Lubrication

Comparative Evaluation of the Tribological Properties of Polymer Materials with Similar Shore Hardness Working in Metal–Polymer Friction Systems

A Global Tribological Approach of Friction Dry Contact Polymer with SGF on Steel, in Terms of Consequences on Metallic Surface Condition (Comparative Wear Coefficients of Steel Surface)

Triboanalysis of Antifrictional Materials Based on Polyamides for Metal-Polymer Sliding Bearings

A qualitative correlation between friction coefficient and steel surface wear in linear dry sliding contact to polymers with SGF

Comparison of Friction and Wear Performances of Pure Poly-ether-ether-ketone Polymer and Carbon Fiber Reinforced Poly-ether-ether-ketone Polymer Composite for Bushing and Bearing Applications

Efficiency of Antifriction Solid Lubricant Coatings for Metal–Polymer Friction Pairs

Large-scale tests on friction and wear of engineering polymers for material selection in highly loaded sliding systems

Evaluation of Tribological Properties of Polymer Materials Used for Sliding Bearings in Agricultural Machinery

Determination of the Effect of Sliding Speed on Tribological Performances of Carbon Fiber Reinforced, Graphite and PTFE Filled Poly-ether-ether-ketone (PEEK) Polymer Composite

Friction and Temperature Behavior of Lubricated Thermoplastic Polymer Contacts

Friction and wear performance of polyether ether ketone (PEEK) polymers in three lubrication regimes