Abstract:The aim of this study was to investigate the physical, mechanical, morphological, structural, and thermal properties of polylactic acid (PLA) and polyhydroxybutyrate (PHB) biopolymer composites reinforced with thermally treated wood flour and to determine the formulations having optimum properties by using multi-criteria decision-making (MCDM) methods. As a filler, Scots pine wood flour (untreated and thermally treated at 212 °C) was used at the loading rates of 10% and 30%. The samples were prepared using a twin-screw extruder and then by compression molding. The results showed that the addition of both thermally treated and untreated wood flour slightly increased the density of the composites. According to the color measurement, the thermally treated wood composites were slightly darkened in appearance. In the composites, with both wood fillers, the water absorption and thickness swelling ratios had increased during the 20–250 days of water exposure. Lower water absorption and thickness swelling rates were found for the composites with thermally treated wood filler compared to the other composites. The wood fillers generally lowered the mechanical properties of the PLA and PLA/PHB composites, with the PHB composites as the exception. However, the tensile modulus and Izod impact strength of the composites generally increased with the addition of wood fillers. Morphological examination performed by scanning electron microscopy (SEM) indicated that the wood flour was mostly homogeneously distributed in the matrix, which improved the mechanical properties of the composites. Thermogravimetric analysis (TGA) showed that the addition of wood filler to the neat biopolymers as a rule did not provide significant improvement in the thermal stability; however, the fillers increased the thermal stability of neat PHB. The Fourier-transform infrared (FTIR) spectroscopy detected no differences in the chemical structure of the composites. The X-ray diffraction (XRD) results indicated a general increase in the crystallinity with the addition of wood fillers to the neat biopolymers and the blends. All the findings were subjected to MCDM analysis to determine the formulation having the optimum properties and the results showed this to be the neat PLA sample.

Study of thermal properties of wood plastic composite reinforced with cellulose micro fibril and nano inorganic fiber filler

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

Wood Flour-Reinforced Green Composites: Parameter Optimization via Multi-criteria Decision-Making Methods

Influence of Zinc Oxide Nanoparticles on Flame Resistance in Wood Plastic Composites

Effect of Fiber Loading on Thermal Properties of Cellulosic Washingtonia Reinforced HDPE Biocomposites

Preparation and characterization of micro/nanocellulose reinforced PVDF/wood composites

Effect of microwave heat treatment on physical and mechanical properties of high-Density polyethylene/wood flour/Nano-SiO2 composites

Studying the influence of the addition of nano-titanium dioxide on the rheological, mechanical, thermal, and electrical properties of polycarbonate/wood flour

Thermal Decomposition Kinetics of Basalt Fiber-Reinforced Wood Polymer Composites

Preparation and Characterisation of Sustainable Wood Plastic Composites Extracted from Municipal Solid Waste

Inspecting the properties of polypropylene/ poplar wood flour composites with microcrystalline cellulose and starch powder addition

Thermal Stability and Flame Resistance of the Coextruded Wood-Plastic Composites Containing Talc-Filled Plastic Shells

Mechanical, flammability and thermal degradation characteristics of rice straw fiber-recycled polystyrene foam hard wood composites incorporating fire retardants

Thermal degradation and intumescent flame retardation of cellulose whisker/epoxy resin composite

Effect of wood flour and compatibilizer content on the properties of wood-plastic composites

Investigate on the physical and mechanical properties of wood-polymer composition materials made on the premise of neighborhood wood flours

Fire Retardancy, Water Absorption, and Viscoelasticity of Borated Wood—Polycarbonate Biocomposites

Thermal Stability of Highly Filled Cellulosic Biocomposites Based on Ethylene–Vinyl Acetate Copolymer

Mechanical and Thermal Analysis of Poly (Vinyl-Alcohol) and Modified Wood Dust Composites

Thermal Properties of Wood-Plastic Composites with Different Compositions

The effects of filler size and content on the fire behavior of melt-spun poly(lactic acid)/cellulose bionanocomposite fibers