Abstract:The aim of this study was to investigate the physical, mechanical, morphological, structural, and thermal properties of polylactic acid (PLA) and polyhydroxybutyrate (PHB) biopolymer composites reinforced with thermally treated wood flour and to determine the formulations having optimum properties by using multi-criteria decision-making (MCDM) methods. As a filler, Scots pine wood flour (untreated and thermally treated at 212 °C) was used at the loading rates of 10% and 30%. The samples were prepared using a twin-screw extruder and then by compression molding. The results showed that the addition of both thermally treated and untreated wood flour slightly increased the density of the composites. According to the color measurement, the thermally treated wood composites were slightly darkened in appearance. In the composites, with both wood fillers, the water absorption and thickness swelling ratios had increased during the 20–250 days of water exposure. Lower water absorption and thickness swelling rates were found for the composites with thermally treated wood filler compared to the other composites. The wood fillers generally lowered the mechanical properties of the PLA and PLA/PHB composites, with the PHB composites as the exception. However, the tensile modulus and Izod impact strength of the composites generally increased with the addition of wood fillers. Morphological examination performed by scanning electron microscopy (SEM) indicated that the wood flour was mostly homogeneously distributed in the matrix, which improved the mechanical properties of the composites. Thermogravimetric analysis (TGA) showed that the addition of wood filler to the neat biopolymers as a rule did not provide significant improvement in the thermal stability; however, the fillers increased the thermal stability of neat PHB. The Fourier-transform infrared (FTIR) spectroscopy detected no differences in the chemical structure of the composites. The X-ray diffraction (XRD) results indicated a general increase in the crystallinity with the addition of wood fillers to the neat biopolymers and the blends. All the findings were subjected to MCDM analysis to determine the formulation having the optimum properties and the results showed this to be the neat PLA sample.

Mechanical and Thermal Analysis of Poly (Vinyl-Alcohol) and Modified Wood Dust Composites

Wood Flour-Reinforced Green Composites: Parameter Optimization via Multi-criteria Decision-Making Methods

Thermal, Mechanical and Morphological Behavior of Poly(propylene)/Wood Flour Composites

Comparative investigation of fillers loading effect on morphological, micromechanical, and thermal properties of polyvinyl alcohol/cellulosicfillers-based composites

Investigation of Mechanical and Thermal Stabilities of Tamarind Seed- and Peanut Shell Powder-Reinforced Vinyl Ester Composite

Investigate on the physical and mechanical properties of wood-polymer composition materials made on the premise of neighborhood wood flours

Investigation of mechanical and tribological performance of wood dust reinforced epoxy composite under dry, wet and heated contact condition

The Analysis of physical and mechanicalbehaviour of PP matrix reinforced with fillermaterial and Flame Retardant as an additive

Development of Wood Polymer Composites from Recycled Wood and Plastic Waste: Thermal and Mechanical Properties

A Comparative Analysis of the Tribological Performance of Coir, Bamboo and Wood Filler Reinforced Polymer Composites

Mechanical and Tribological Performance of Polymer Composite Materials: A Review

Study of thermal properties of wood plastic composite reinforced with cellulose micro fibril and nano inorganic fiber filler

Effect of Filler Loading on Mechanical and Tribological Properties of Wood Apple Shell Reinforced Epoxy Composite

Thermal Analysis of Anti-ultraviolet Poly(vinylidene fluoride)/Wood Flour Composites

New Composite Materials Based on PVA, PVP, CS, and PDA

Moisture diffusion analysis and their effects on the mechanical properties of organic particle filled natural fiber reinforced hybrid polymer composites

Synthesis and Characterization of Cellulose Microfibril-Reinforced Polyvinyl Alcohol Biodegradable Composites

Mechanical, viscoelastic, and flammability properties of polymer composites reinforced with novel Sirisha bark filler

Biocarbon reinforced polypropylene composite: An investigation of mechanical and filler behavior through advanced dynamic atomic force microscopy and X-ray micro CT

Preparation and Characterisation of Composites from Industrial Waste: Wood Flour and Expanded Ethylene Vinyl Acetate

Insight into the Surface Properties of Wood Fiber-Polymer Composites