Abstract:Background: Proximal humeral fractures treated with locking plate can fail due to varus collapse, especially in osteoporotic bone with medial cortex comminution. The use of an intramedullary strut together with locking plate fixation may strengthen fixation and provide additional medial support to prevent the varus malalignment. This study biomechanically investigates the influence of an intramedullary cortical bone strut on the cyclic stability of proximal humeral fractures stabilized by locking plate fixation in a cadaver model. Methods: Ten cadaveric humeri were divided into two groups statistically matched for bone density. Each specimen was osteotomized with 10 mm gap at the surgical neck. The non-augmented group stabilized with locking plate alone; in the augmented group, a locking plate was used combined with an intramedullary cortical bone strut. The strut was retrograded into the subchondral bone, and three humeral head screws were inserted into the strut to form a plate-screw-strut mechanism. The cyclic axial load was performed to 450 N for 6000 cycles and then loaded to failure. Construct stiffness, cyclic loading behavior and failure strength were analyzed to identify differences between groups. Results: The augmented constructs were significantly stiffer than the non-augmented constructs during cycling. On average, the maximum displacements at 6000 cycles for non-augmented and augmented groups were 3.10 ± 0.75 mm and 1.7 ± 0.65 mm (p = 0.01), respectively. The mean peak-to-peak (inter cycle) displacement at 6000 cycles was about 2 times lower for the augmented group (1.36 ± 0.68 mm vs. 2.86 ± 0.51 mm). All specimens showed varus collapse combined with loss of screw fixation of the humeral head. The failure load of the augmented group was increased by 2.0 (SD = 0.41) times compared with the non-augmented group (p < 0.001). Conclusions: The stability and strength of the locking plate augmented with an intramedullary strut were significantly increased. For bone with poor quality, the subsidence of the locked screws led larger displacement, decreased the stability of the constructs, however, the plate-screw-strut mechanism provided more rigidity to stabilize the fixation. This study emphasized the importance of intramedullary support for the proximal humeral fractures fixed with a locked plate under cyclic loading, especially in bone with poor quality. This work is based on the results of cadaver model, further in vivo analysis is necessary to determine if the clinical results can be extrapolated from this data.

Comparison of fibula strut and calcium phosphate cement augmentation of the medial buttress in 2-part proximal humerus fractures reconstruction: a biomechanical study

Impact of augmentation strategy variations on the mechanical characteristics of patients with osteoporotic proximal humerus fractures with medial column instability

Finite Element Analysis of an Intramedulary Anatomical Strut for Proximal Humeral Fractures with Disrupted Medial Column Instability: A Cohort Study.

Intramedullary cortical bone strut improves the cyclic stability of osteoporotic proximal humeral fractures

Cyclic Stability of Locking Plate Augmented with Intramedullary Polymethyl Methacrylate (PMMA) Strut Fixation for Osteoporotic Humeral Fractures: A Biomechanical Study

How to Improve the Biomechanical Stability of Endosteal Augmentation for Proximal Humerus Fracture with Osteopenia? A Cadaveric Study.

Biomechanical in vitro assessment of screw augmentation in locked plating of proximal humerus fractures

[Effectiveness and Biomechanical Analysis of Three Fixation Methods in Treatment of Posterior Pilon Fractures].

Cement-augmented screw fixation for calcaneal fracture treatment: a biomechanical study comparing two injectable bone substitutes

Biomechanical stability of endosteal augmentation for osteoporotic proximal humerus fracture: a finite element analysis

Biomechanical evaluation of novel intra- and extramedullary assembly fixation for proximal humerus fractures in the elderly

Biomechanics of internal fixation in Hoffa fractures – A comparison of four different constructs

Locking plate augmentation of polymethylmethacrylate-filled distal femoral defects: A biomechanical study

Biomechanical behavior of three types of fixation in the two-part proximal humerus fracture without medial cortical support

Cancellous Bone Allograft is Comparable to Fibular Strut Allograft for Augmentation in Three- or Four-Part Proximal Humeral Fractures.

Dorsal Plating, Lateral Plating, and Intramedullary Screw Fixation of Extra-Articular Proximal Phalangeal Fractures: A Cadaveric Biomechanical Comparison

Augmented versus non-augmented locking-plate fixation in proximal humeral fractures

Inferomedial cortical bone contact and fixation with calcar screws on the dynamic and static mechanical stability of proximal humerus fractures

[Biomechanical assessment of newly-designed proximal femoral medial buttress plate for treatment of reverse oblique femoral intertrochanteric fracture].

The Augment of the Stability in Locking Compression Plate with Intramedullary Fibular Allograft for Proximal Humerus Fractures in Elderly People.

Fibular Autograft as Medial Support with Proximal Humerus Locking Plate Construct in Comminuted Proximal Humerus Fractures: A Retrospective Analysis