Abstract:Analysis of volatile organic compounds (VOCs) secreted in urine, blood, breath, etc. is a new method for monitoring the metabolism and biochemistry of the human body. However, due to the complexity of samples, a pre-concentration step is necessary before the final analysis with gas chromatography-mass spectroscopy (GC-MS). Therefore, miniaturized extraction methods such as solid-phase microextraction (SPME) can be a promising and simple pre-concentration technique. Different strategies have been adopted for the fabrication or modification of SPME fibers. This study presents the preparation and characterization of glass optical fibers coated with ZnO nanorods functionalized with gallic acid (ZnO@GA nanorod) as SPME adsorbent in GC-MS. ZnO@GA nanorods were synthesized separately and then coated onto the fibers. The coated fibers were characterized by using field emission scanning electron microscopy coupled with energy dispersive analysis of X-rays (FESEM/EDAX) and Fourier transform infrared spectroscopy (FTIR) techniques. Possessing a high surface to volume ratio of ZnO nanorods and functional groups of GA, the ZnO@GA nanorod-based SPME fibers exhibited good extraction performance for VOCs comparing with the commercial polydimethylsiloxane (PDMS) coated fibers. Under optimal conditions (NaCl concentration, 30% w/v; extraction time of 25 min; pH, 5-7 and stirring rate of 400 rpm) ZnO@GA nanorods coated fibers achieved low detection limits (0.32-4.8 μg/L), low quantification limits (1.8-16.3 μg/L) and good linearity (5-1000 μg/L) for selected VOCs. The repeatability (n = 3) for a single fiber was within the range of 4.1-7.9% (intra-day) and 5.7-9.6% (inter-day) while the reproducibility (n = 3) of fiber-to-fiber were in the range of 4.7% and 9.9%. This method was successfully used for the determination of six VOCs in water and urine with satisfactory recoveries of 90-112%. ZnO@GA nanorod coated fibers, despite possessing a much thinner coating compared to the commercial fibers, revealed a better overall extraction efficiency towards VOCs. These results indicated that the ZnO@GA provided a promising alternative in sample pretreatment and analysis in GC-MS.

Nanoparticle-Incorporated PDMS Film as an Improved Performance SPME Fiber for Analysis of Volatile Components of Eucalyptus Leaf

Preparation and Characteristics of New Coating for Solid-Phase Microextraction.

Preparation Of Solid-Phase Microextraction Fiber Coated With Single-Walled Carbon Nanotubes By Electrophoretic Deposition And Its Application In Extracting Phenols From Aqueous Samples

Fabrication of a Polymeric Composite Incorporating Metal-Organic Framework Nanosheets for Solid-Phase Microextraction of Polycyclic Aromatic Hydrocarbons from Water Samples.

Nanoporous carbon fiber derived from Cu-BDC metal organic framework @pencil graphite as a sorbent for solid phase microextraction of acetamiprid and imidacloprid

Preparation of Nanoporous Array Anodic Titanium Wire Supported Solid-Phase Microextraction Fiber Coated with A Copolymerized Polymerizable Ionic Liquid Monomer Pair

PDMS-coated Γcd-Mof Solid-Phase Microextraction Fiber for BTEX Analysis with Boosted Performances.

A solid-phase microextraction fiber with carbon nanoparticles as sorbent material prepared by a simple flame-based preparation process

Simple and rapid preparation of homemade SPME PDMS fibers and their application to the analysis of personal care products in water samples

[Preparation of New Solid-Phase Microextraction Fiber Based on Cucurbit[7] Uril Coordination Polymers and Its Application in Determination of Polycyclic Aromatic Hydrocarbons from Environmental Water Samples].

Development of a Highly Robust Solid Phase Microextraction Fiber Based on Crosslinked Methyl Methacrylate–polyhedral Oligomeric Silsesquioxane Hybrid Polymeric Coating

Preparation and Characterization of Porous Carbon Material-Coated Solid-Phase Microextraction Metal Fibers.

Preparation and Application of Poly(dimethylsiloxane)/β‐cyclodextrin Solid‐phase Microextraction Fibers

Ultrasonic assisted synthesis of a novel ternary nanocomposite based on carbon nanotubes/zeolitic imidazolate framework-67/polyaniline for solid-phase microextraction of organic pollutants

Task-specific Solid-Phase Microextraction Based on Ionic Liquid/polyhedral Oligomeric Silsesquioxane Hybrid Coating for Sensitive Analysis of Polycyclic Aromatic Hydrocarbons by Gas Chromatography-Mass Spectrometry.

Layer-by-layer Fabrication of Chemical-Bonded Graphene Coating for Solid-Phase Microextraction.

Fabrication of novel nanoporous array anodic alumina solid-phase microextraction fiber coating and its potential application for headspace sampling of biological volatile organic compounds

Fabrication of an SPME fiber based on ZnO@GA nanorods coated onto fused silica as a highly efficient absorbent for the analysis of cancer VOCs in water and urine

High Extraction Efficiency for Polar Aromatic Compounds in Natural Water Samples Using Multiwalled Carbon Nanotubes/nafion Solid-Phase Microextraction Coating.

Carbon nanospheres covalently modified with polydimethylsiloxane on a porous sol–gel support for use in headspace solid-phase fiber microextraction of BTEX

Graphitic Carbon Nitride Derivative with Large Mesopores As Sorbent for Solid-Phase Microextraction of Polycyclic Aromatic Hydrocarbons.