Abstract:The cross-slot stagnation point flow is one of the benchmark problems in non-Newtonian fluid mechanics as it allows large strains to develop and can therefore be used for extensional rheometry measurements or, once instability arises, as a mixing device. In such a flow, beyond a critical value for which the ratio of elastic force to viscous force is high enough, elasticity can break symmetry even in the absence of significant inertial forces (i.e. creeping flow), which is an unwanted phenomenon if the device is to be used as a rheometer but beneficial from a mixing perspective. In this work, a passive control mechanism is introduced to the cross-slot by adding a cylinder at the geometric centre to replace the ‘free’ stagnation point with ‘pinned’ stagnation points at the surface of the cylinder. In the current modified geometry, effects of the blockage ratio (the ratio of the diameter of the cylinder to the width of the channel), the Weissenberg number (the ratio of elastic forces to viscous forces) and extensibility parameters ( $\unicode[STIX]{x1D6FC}$ and $L^{2}$ ) are investigated in two-dimensional numerical simulations using both the simplified Phan-Thien and Tanner and finitely extensible nonlinear elastic models. It is shown that the blockage ratio for fixed solvent-to-total-viscosity ratio has a stabilizing effect on the associated symmetry-breaking instability. The resulting data show that the suggested modification, although significantly changing the flow distribution in the region near the stagnation point, does not change the nature of the symmetry-breaking instability or, for low blockage ratio, the critical condition for onset. Using both numerical and physical experiments coupled with a supporting theoretical analysis, we conclude that this instability cannot therefore be solely related to the extensional flow near the stagnation point but it is more likely related to streamline curvature and the high deformation rates towards the corners, i.e. a classic ‘curved streamlines’ purely elastic instability. Our work also suggests that the proposed geometric modification can be an effective approach for enabling higher flow rates to be achieved whilst retaining steady symmetric flow.

Geometric scaling of a purely elastic flow instability in serpentine channels

Enhanced Stability of Flows Through Contraction Channels: Combining Shape Optimization and Linear Stability Analysis

A Purely Elastic Instability and Mixing Enhancement in a 3D Curvilinear Channel Flow

Comparison of viscoelastic flows in two- and three-dimensional serpentine channels

Elastic instability in a family of rectilinear viscoelastic channel flows devoid of centerline symmetry

Control of a purely elastic symmetry-breaking flow instability in cross-slot geometries

Linear instability of shear thinning pressure driven channel flow

Bifurcations in flows of complex fluids around microfluidic cylinders

Experimental assessment of mixing layer scaling laws in Rayleigh-Taylor instability

Purely elastic turbulence in pressure-driven channel flows

Hydrodynamic Instability of Fiber Suspensions in Channel Flows

Elastic instability in stratified core annular flow

Polymeric diffusive instability leading to elastic turbulence in plane Couette flow

Flow Direction-Dependent Elastic Instability in a Symmetry-Breaking Microchannel

The linear instability of the stratified plane Couette flow

Elasto-Inertial Instability in Torsional Flows of Shear-Thinning Viscoelastic Fluids

Purely elastic linear instabilities in parallel shear flows with free-slip boundary conditions

Polymer diffusive instability leading to elastic turbulence in plane Couette flow

Elastic instability in a straight channel of viscoelastic flow without prearranged perturbations

Peeling fingers in an elastic Hele-Shaw channel

Numerical study of viscoelastic upstream instability