Elasto-Inertial Instability in Torsional Flows of Shear-Thinning Viscoelastic Fluids

Rishabh V. More,Eugene Pashkovski,Reid Patterson,Gareth H. McKinley

2024-03-11

Abstract:It is well known that inertia-free shearing flows of a viscoelastic fluid with curved streamlines, such as the torsional flow between a rotating cone and plate, or the flow in a Taylor-Couette geometry, can become unstable to a three-dimensional time-dependent instability at conditions exceeding a critical Weissenberg (Wi) number. However, the combined effects of fluid elasticity, shear thinning, and finite inertia (as quantified by the Reynolds number Re) on the onset of elasto-inertial instabilities are not fully understood. Using a set of cone-plate geometries, we experimentally explore the entire Wi - Re phase space for a series of rate-dependent viscoelastic fluids (quantified using a shear thinning parameter $\beta_P$). We tune $\beta_P$ by varying the polymer concentration in solutions. This progressively reduces shear-thinning but leads to finite inertial effects before the onset of elastic instability, thus naturally resulting in elasto-inertial coupling. Transient rheometric measurements and flow visualization experiments allow us to investigate the effects of flow geometry and document the combined effects of varying Wi, Re, and $\beta_P$ on the emergence of secondary motions at the onset of instability. The resulting critical state diagram quantitatively depicts the competition between the stabilizing effects of shear thinning and the destabilizing effects of inertia. We extend the curved streamline instability criterion of Pakdel and McKinley 1996 for the onset of purely elastic instability in curvilinear geometries by using scaling arguments to incorporate shear thinning and finite inertial effects. The augmented condition facilitates predictions of the onset of instability over a broader range of flow conditions, thus bridging the gap between purely elastic and elasto-inertial curved streamline instabilities.

Fluid Dynamics,Applied Physics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the influence of fluid elasticity and finite inertia on the elastic - inertial instability in torsional flow in a shear - thinning viscoelastic fluid. Specifically, the authors explored through a series of experiments the influence of the Weissenberg number ($W_i$) and the Reynolds number ($R_e$) on the occurrence of this instability under different shear - thinning parameters (represented by $\beta_P(\dot{\gamma})$). They used a cone - plate geometry to study this problem and adjusted the shear - thinning characteristics of the fluid by changing the polymer concentration in the solution. In addition, the authors extended the pure - elastic instability criterion proposed by Pakdel and McKinley in 1996 to incorporate shear - thinning and finite - inertia effects, thereby predicting the instability onset conditions under a wider range of flow conditions and filling the gap between pure - elastic and elastic - inertial meandering instability.

### Key Problem Summary:
1. **Influence of Shear - thinning on Elastic - inertial Instability in Torsional Flow**: Study how shear - thinning characteristics affect the stability of the fluid under specific flow conditions.
2. **Coupling Effect of Fluid Elasticity and Inertia**: Explore how fluid elasticity and inertia interact under different conditions, leading to the occurrence of instability.
3. **Extension of Existing Theoretical Models**: Based on experimental data, extend existing theoretical models so that they can better predict the behavior of shear - thinning fluids under complex flow conditions.

### Research Methods:
- **Experimental Design**: Conduct experiments in cone - plate geometries with different cone angles and radii using polyisobutylene (PIB) solutions with different polymer concentrations.
- **Measurement Techniques**: Observe and analyze the development process of instability through time - resolved rheological measurements and flow visualization experiments.
- **Data Analysis**: Use linear stability analysis and nonlinear dynamics analysis to quantify the critical conditions for the occurrence of instability.

### Main Findings:
- **Influence of Shear - thinning**: As the polymer concentration decreases, the shear - thinning effect intensifies, causing the instability to occur at a lower Weissenberg number.
- **Increase in Inertia Effect**: Shear - thinning leads to a decrease in viscosity, making the inertia effect more significant, thereby affecting the development mechanism of the instability.
- **Change in Critical Conditions**: Through experimental data, a phase diagram of the Weissenberg number and the Reynolds number is drawn, showing the critical conditions for the occurrence of instability under different conditions.

### Theoretical Contributions:
- **Extension of Instability Criterion**: Propose a new instability criterion that includes shear - thinning and finite - inertia effects and can better predict instability under complex flow conditions.
- **Unified Critical Instability Conditions**: Through experimental verification, propose a unified critical instability condition that is applicable to fluids with different shear - thinning characteristics.

In general, through experimental and theoretical analysis, this paper deeply explores the elastic - inertial instability in torsional flow of shear - thinning viscoelastic fluids and provides new insights into understanding the behavior of such complex fluids.