Abstract:Rigid polyurethane foams (RPUFs) were successfully modified with different weight ratios (0.5 wt%, 1 wt%, 2 wt%) of nanosilica and nanosilica suspension (nanosilica-enhanced with ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate, [bmim][PF6]). The resulting foams were evaluated by their processing parameters, chemical structure (Fourier Transform Infrared Spectroscopy Analysis, FTIR), morphology (Scanning Electron Microscopy Analysis, SEM), mechanical properties (compressive test, three-point bending test), viscoelastic behavior (Dynamic Mechanical Analysis, DMA), thermal property (Thermogravimetric Analysis, TGA, thermal conductivity) and application properties (water absorption, dimensional stability). The results showed that the morphology of modified foams is significantly affected by the type of the filler and filler content, which resulted in inhomogeneous, irregular, large cell shapes and further affected the physical and mechanical properties of resulting materials. RPUFs modified with nanosilica suspension represent better mechanical and thermal properties comparing to the RPUFs modified with pure nanosilica. The results showed that the best results were obtained for RPUFs modified with 1 wt% of nanosilica suspension. In comparison with unfilled foam, compositions modified with 1 wt% of nanosilica suspension provide higher density (44 kg/m3), greater compression strength (258 kPa measured parallel and 162 kPa measured perpendicular), and lower thermal conductivity (0.026 W/m·K). The results obtained in this study suggest that the introduction of nanosilica and nanosilica suspension over a certain optimal level (such as 2 wt%) has a negative effect on the cell morphology, which leads to deterioration of physico-mechanical properties of the modified foams.

Properties of rigid polyurethane foams filled with glass microspheres

Effect of Surface Modification of Montmorillonite on the Properties of Rigid Polyurethane Foam Composites

Rigid Polyurethane Foams Reinforced by Glass Beads

Microstructure of Ceramic Foams

Polyurethane foams reinforced with microspheres - assessment of the application in construction as a thermal insulation material

Composites of rigid polyurethane foams and silica powder filler enhanced with ionic liquid

Synergistic effect of silica aerogels and hollow glass microspheres on microstructure and thermal properties of rigid polyurethane foam

Effect of hollow glass microsphere on combustion behavior and mechanical properties of polyurethane foam

Hollow glass microspheres/phenolic syntactic foams with excellent mechanical and thermal insulate performance

Rowanberry/vermiculite modified rigid polyurethane foams

Mechanical Properties of Reinforced Reaction Injection Moulding Polyurethane Foam With Long Glass Fibre

Influence of the Microcrystalline Cellulose Dispersion Method on the Structure and Properties of Rigid Polyurethane Foam Composites

Study on the Mechanical Properties of Hybrid Reinforced Rigid Polyurethane Composite Foam

Research on Properties of Epoxy Resin/Hollow Glass Microspheres Foam Materials

The Effect of Rapeseed Oil Biopolyols and Cellulose Biofillers on Selected Properties of Viscoelastic Polyurethane Foams

Preparation and energy absorption of flexible polyurethane foam with hollow glass microsphere

Effect of the Composition of a Polyisocyanate–Polyester–Foaming Agent Mixture on the Properties of Polyurethane Foams

Effects of high functionality polyol on the structure and properties of rigid polyurethane foam

Acoustic/mechanical properties of polyurethane composites with syntactic hollow spheres

Geometrical and mechanical characterisation of hollow thermoplastic microspheres for syntactic foam applications