Abstract:The size effect in the fracture of solids represents a highly critical issue with a prolonged history of research. The size effect of traditional quasi-brittle materials can already be well described through the size effect model. However, there is still a lack of research on the size effect of strain-hardening cementitious composites (SHCC), a special type of fibre-reinforced concrete with macro-scale strain-hardening behaviour after first cracking. Being distinct from traditional quasi-brittle materials with softening nature, SHCC is thus expected to behave differently in terms of size effect. In this research, the structural size effect problem of SHCC is comprehensively studied by experimental investigation and theoretical analysis. Geometrically similar notched three-point bending specimens were tested in mode I and mixed mode I/II fracture condition. The whole-process of failure and matrix cracking zone around the main crack was captured with high resolution by digital image correlation technology. Experimental results showed that apparent fracture energy, nominal strength, structural ductility and fracture resistance curve are all structural size-dependent. The apparent fracture energy was shown to arise with specimen size within the tested range. This is related to large-scale pseudo yielding, i.e. enlargement of matrix cracking zone (like the yielding zone in metals) with increasing structural size. It thus provides an indirect method for the estimation of cohesive fracture energy of single crack with constitutive nature. Due to the scaled matrix cracking zone, an intermediate asymptote exists in the size effect curve of nominal strength, in addition to the plastic and LEFM asymptotes in the Bažant original size effect law. This resembles the recent finding of intermediate asymptote in plastic-hardening metal( Dönmez et al. 2023 ). The size-dependence of R-curve was also examined. Though size-dependent, the equivalent LEFM-based R-curves are shown to have three common stages reflecting different cracking processes. Based on experimental results, the size effect of fracture energy and nominal strength are finally modelled theoretically in the Bažant's framework of equivalence between energy release and fracture resistance.

A SIZE EFFECT STUDY ON THE SPLITTING CRACK INITIATION AND PROPAGATION IN OFF-AXIS LAYERS OF COMPOSITE LAMINATES

Concurrent Multiscale Modeling of In-Plane Micro-Damage Evaluation in Z-pinned Composite Laminates

Size effects in micro and nanoscale materials fracture

Mode I and II Interlaminar Fracture in Laminated Composites: A Size Effect Study

Size Effect and Scaling in Quasi-static and Fatigue Fracture of Graphene Polymer Nanocomposites

Size Effects in Layered Composites – Defect Tolerance and Strength Optimization

Numerical Experiment on Size Effect for Sfrc Splitting Fracture

Elastic and Fracture Behavior of Three-Dimensional Ply-to-Ply Angle Interlock Woven Composites: Through-Thickness, Size Effect, and Multiaxial Tests

Size effects in fatigue crack growth in confined volumes: A microbending case study on nc Ni

Fracture Behavior and Size Effect of UHPFRC: Experimental and Mesoscale Numerical Investigation

Experimental and simulation study on compressive failure evolution of multidirectional laminates with different dimensions

Fracturing Behavior and Size Effect of Discontinuous Fiber Composite Structures with Different Platelet Sizes

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

Structural size effect in the mode I and mixed mode I/II fracture of strain-hardening cementitious composites (SHCC)

Effect of the Thickness on the Fracturing Behavior of Discontinuous Fiber Composite Structures

Monte Carlo Simulations of Mesoscale Fracture of Concrete with Random Aggregates and Pores: A Size Effect Study

Boundary element method simulation of the size effect in particle dispersed composites

In-Plane fracture of laminated fiber reinforced composites with varying fracture resistance: experimental observations and numerical crack propagation simulations

A Study on the Multi-axial Fatigue Failure Behavior of Notched Composite Laminates

Mechanical response and critical failure mechanism characterization of notched carbon fiber reinforced polymer laminate subjected to tensile loading

Effect of sizing on the interfacial shear strength of carbon fiber/epoxy resin monofilament composite