Abstract:In the present investigation a novel, environmentally affable and economical, modified gellan gum nanocomposite (MAA-g-GG/Ppy/MMT) was fabricated via free-radical polymerization for the liquid-phase mitigation of Methylene blue (MB) and Malachite green (MG) dyes. The innovation of this work is substantiated by the intentional combination of diverse materials, the strategic incorporation of polypyrrole for enhanced adsorption, and the thoughtful addition of MMT as a nanofiller to address mechanical strength and improve adsorption capacity. The physico-chemical facets of MAA-g-GG/Ppy/MMT and its interaction with the dye molecules were elucidated using FT-IR, SEM-EDX, BET, TEM, and XRD techniques. The optimum conditions for the sorption of MB and MG were deemed to be dosage (1.2 g/L for both dyes), contact time (50 min for both dyes), initial MG/MB concentration (MB = 40 mg/L & MG = 30 mg/L), and pH (MB = 10 & MG = 7). The Freundlich isotherm was identified as the most suitable model, as evidenced by the highest R 2 value (∼0.999), indicating multilayer adsorption. The pseudo second-order model appraised the kinetic data. Thermodynamic findings revealed the adsorption process to be spontaneous, viable and exothermic which was ascertained by negative ∆H ⸰ values (−22.8 kJ/mol for MB and −18.3 kJ/mol for MG). The substantial Langmuir adsorption capacity ( Q m : MG =185.185; MB = 344.827) can be ascribed to the reason for strong interactions between MAA-g-GG/Ppy/MMT and dyes. The high reliability of MAA-g-GG/Ppy/MMT was determined by the regeneration studies that worked up to four cycles for both dyes. The real water (distilled water, tap water, and river water) samples spiked with MG/MB demonstrated a substantial uptake of dyes (>85 %) and the marginal influence of ionic strength on the adsorptive potential of MAA-g-GG/Ppy/MMT validated its efficacy for the decontamination of real effluents. The forces of attraction between the dyes and MAA-g-GG/Ppy/MMT included van der Waals, electrostatic forces of attraction, and π-π interaction. This green, economical, and viable MAA-g-GG/Ppy/MMT will prove to be an efficient adsorbent for the decontamination process of sequestration of dyes to achieve a sustainable environment.

Multiwalled Carbon Nanotubes-Encapsulated Gellan Gum Membrane for Micro-Solid Phase Extraction of Selected Polycyclic Aromatic Hydrocarbons in Environmental Water and Beverages

Carbon nanotube-based benzyl polymethacrylate composite monolith as a solid phase extraction adsorbent and a stationary phase material for simultaneous extraction and analysis of polycyclic aromatic hydrocarbon in water

Development of a High-Efficient and Environmentally Friendly Melamine-Formaldehyde Resin-Based Solid Phase Microextraction Fiber for Enhanced Extraction of Polycyclic Aromatic Hydrocarbons from Environmental Water

Helical Multi-walled Carbon Nanotubes as an Efficient Material for the Dispersive Solid-Phase Extraction of Low and High Molecular Weight Polycyclic Aromatic Hydrocarbons from Water Samples: Theoretical Study

Facile fabrication of carbon nanotube hollow microspheres as coating fiber for ultrasensitive solid-phase microextraction of phthalate acid esters in tea beverages

Development of new PDMS in tube extraction microdevice for enhanced monitoring of polycyclic aromatic hydrocarbons and their derivatives in water

ZIF-8/h-BN Coated Solid-Phase Microextraction Fiber Via Physical Coating Technology and Sol-Gel Technology for the Determination of Nitro Polycyclic Aromatic Hydrocarbons from Water Samples

Application of Multiwalled Carbon Nanotubes As a Solid‐Phase Extraction Sorbent for Chlorobenzenes

Extraction and determination of pesticide residues in water using carbon nanotubes coupled with gas chromatography-mass spectroscopy

Biochar nanosphere-functionalized carbon fibers for in-tube solid-phase microextraction of polycyclic aromatic hydrocarbons in environmental water followed by liquid chromatography and diode array detection

Multi-Walled Carbon Nanotubes as Effective Sorbents for Rapid Analysis of Polycyclic Aromatic Hydrocarbons in Edible Oils Using Dispersive Solid-Phase Extraction (d-SPE) and Gas Chromatography—Tandem Mass Spectrometry (GC-MS/MS)

Covalent organic framework modified nickel foam adsorbents for dispersive micro-solid phase extraction of polycyclic aromatic hydrocarbons from Chinese herbal medicines

In-situ preparation of β-cyclodextrin-crosslinked polymer coated glass fiber for in-tube solid-phase microextraction of polycyclic aromatic hydrocarbons from water samples

MOF-derived porous carbon microspheres Ni@C-acid as solid-phase microextraction coating for extraction of polycyclic aromatic hydrocarbons from tea infusions

A magnetic solid phase extraction microfluidic chip coupled with gas chromatography-mass spectrometry for the determination of polycyclic aromatic hydrocarbons in aqueous samples

Hierarchically spherical assembly of carbon nanorods derived from metal-organic framework as solid-phase microextraction coating for nitrated polycyclic aromatic hydrocarbon analysis

A solid-phase microextraction fiber with carbon nanoparticles as sorbent material prepared by a simple flame-based preparation process

Polycyclic aromatic hydrocarbons extraction and removal from wastewater by carbon nanotubes: A review of the current technologies, challenges and prospects

Appraisal of the adsorption potential of novel modified gellan gum nanocomposite for the confiscation of methylene blue and malachite green

Development and Evaluation of Ultrasound-Assisted Solvent Extraction of Polycyclic Aromatic Hydrocarbons from Membrane-Packed Biota Samples Followed by GC–MS/MS Analysis

A durable hydrophobicity hydrazone covalent organic framework coating for solid phase microextraction of polycyclic aromatic hydrocarbons in food and environmental sample