Abstract:Composite stamps for the solvent‐free high‐temperature capillary stamping of polymer melts consisting of thin nanoporous gold layers attached bulk molten polymer reservoirs are reported. The nanoporous gold layer stabilizes the topographically patterned contact surface and the polymer melt supports the nanoporous gold layer; polymer microstructures may be produced without ink depletion and problems related to the presence of solvents. Parallel lithographic deposition of polymers onto counterpart substrates is a widely applied surface manufacturing operation. However, polymers may only be soluble in organic solvents or are insoluble at all. Solvent evaporation during stamping may trigger hardly controllable capillarity‐driven flow processes or phase separation, and polymer solutions may spread on the counterpart substrates. Solvent‐free stamping of melts prevents these drawbacks. Here, a stamp design for the deposition of melts is devised, which intrinsically circumvents ink depletion. The stamps' topographically patterned contact surfaces with protruding contact elements contacting the counterpart substrates consist of a nanoporous gold layer with a thickness of a few micrometers. The nanoporous gold layer is attached to a molten polymer layer, which is support for the nanoporous gold layer and ink reservoir at the same time. The nanoporous gold layer in turn stabilizes the topography of the stamps' contact surfaces. As examples, arrays of submicron microdots of polystyrene and poly(vinylidenefluoride‐trifluoroethylene) (PVDF‐TrFE) are manufactured. The P(VDF‐TrFE) microdots are partially crystalline, ferroelectric, and can be locally poled. It is envisioned that the methodology reported here can be automatized and may be extended to functional low‐molecular‐mass compounds, such as active pharmaceutical ingredients.

Fabrication of an adhesion-free transparent roll stamp for large area patterning using ultraviolet-type roller nanoimprint lithography

Dynamics of Liquid Transfer from Nanoporous Stamps in High-Resolution Flexographic Printing

Self-Collapse Lithography

Multilength Scale Patterning of Functional Layers by Roll-to-Roll Ultraviolet-Light-Assisted Nanoimprint Lithography

Scalable Lithography From Natural Dna Patterns Via Polyacrylamide Gel

UV-based nanoimprinting lithography with a fluorinated flexible stamp

Study on UV Nano-imprint Lithography Based on OG154

Fabrication of High Aspect Ratio Micro-Structures with Superhydrophobic and Oleophobic Properties by Using Large-Area Roll-to-Plate Nanoimprint Lithography

Batch Transfer Printing of Small-Size Silicon Nano-Films with Flat Stamp

Preparation of Hydrophilic Poly(dimethylsiloxane) Stamps by Plasma-Induced Grafting

Fabrication of Large-Area Nanostructures Using Cross-Nanoimprint Strategy

Fast Fabrication of Tio2 Hard Stamps for Nanoimprint Lithography

Rapid vat photopolymerization through a superamphiphobic interface

A volatile polymer stamp for large-scale, etching-free, and ultraclean transfer and assembly of two-dimensional materials and its heterostructures

Precision-induced localized molten liquid metal stamps for damage-free transfer printing of ultrathin membranes and 3D objects

Fabrication System for Large-Area Seamless Nanopatterned Cylinder Mold Using the Spiral Laser Interference Exposure Method

Microfabrication using elastomeric stamp deformation

Large-Area Fabrication of A Nanostructure-Induced Hydrophobic Surface from A Hydrophilic Polymer

Fabrication and Application of High Quality Poly(Dimethylsiloxane) Stamps by Gamma Ray Irradiation

Fabrication of Nanostructures on a Large-Area Substrate with a Minimized Stitch Error Using the Step-and-Repeat Nanoimprint Process

High‐Temperature Melt Stamping of Polymers Using Polymer/Nanoporous Gold Composite Stamps