Abstract:The current policy of managing high-level waste (HLW) derived in the closed nuclear fuel cycle consists in their vitrification into B-Si or Al-P vitreous forms. These compounds have rather limited capacity with respect to the HLW (5–20 wt%), and their properties change over time due to devitrification of the glasses. Cardinal improvement in the management of HLW can be achieved by their separation onto groups of elements with similar properties, followed by their immobilization in robust waste forms (matrices) and emplacement in deep disposal facilities. One of the possible fractions contains trivalent rare-earth elements (REEs) and minor actinides (MAs = Am and Cm). REEs are the fission products of actinides, which are mainly represented by stable isotopes of elements from La to Gd as well as Y. This group also contains small amounts of short-lived radionuclides with half-lives (T1/2) from 284 days (144Ce) to 90 years (151Sm), including 147Pm (T1/2 = 2.6 years), 154Eu (T1/2 = 8.8 years), and 155Eu (T1/2 = 5 years). However, the main long-term environmental hazard of the REE–MA fraction is associated with Am and Cm, with half-lives from 18 years (244Cm) to 8500 years (245Cm), and their daughter products: 237Np (T1/2 = 2.14 × 106 years), 239Pu (T1/2 = 2.41 × 104 years), 240Pu (T1/2 = 6537 years), and 242Pu (T1/2 = 3.76 × 105 years), which should be immobilized into a durable waste form that prevents their release into the environment. Due to the heat generated by decaying radionuclides, the temperature of matrices with an REE–MA fraction will be increased by hundreds of centigrade above ambient. This process can be utilized by selecting a vitreous waste form that will crystallize to form durable crystalline phases with long-lived radionuclides. We estimated the thermal effects in a potential REE–MA glass composite material based on the size of the block, the content of waste, the time of storage before immobilization and after disposal, and showed that it is possible to select the waste loading, size of blocks, and storage time so that the temperature of the matrix during the first decades will reach 500–700 °C, which corresponds to the optimal range of glass crystallization. As a result, a glass–ceramic composite will be produced that contains monazite ((REE,MA)PO4) in phosphate glasses; britholite (Cax(REE,MA)10-x(SiO4)6O2) or zirconolite ((Ca,REE,MA)(Zr,REE,MA)(Ti,Al,Fe)2O7), in silicate systems. This possibility is confirmed by experimental data on the crystallization of glasses with REEs and actinides (Pu, Am). The prospect for the disposal of glasses with the REE–MA fraction in deep boreholes is briefly considered.

Recycling of MgO, Mo & ZrO2 based Actinide-Bearing Matrices: Assessment of Reprocessing Feasibility & Waste Production

Group Partitioning of Minor Actinides and Rare Earths from Highly Active Liquid Waste by Extraction Chromatography Utilizing Two Macroporous Silica-Based Impregnated Polymeric Composites

Synthesis of Two Novel Macroporous Silica-Based Impregnated Polymeric Composites and Their Application in Highly Active Liquid Waste Partitioning by Extraction Chromatography

Separation of Minor Actinides and Rare Earths from a Simulated High Activity Liquid Waste by Two Macroporous Silica‐based Polymeric Composites

Synthesis and Application of A Macroporous Silica-Based Polymeric Octyl(Phenyl)-N,N-Diisobutylcarbamoylmethylphoshine Oxide Composite for the Chromatographic Separation of High Level Liquid Waste

A New Partitioning Process for High-Level Liquid Waste by Extraction Chromatography Using Silica-Substrate Chelating Agent Impregnated Adsorbents

Application of a Macroporous Silica-Based CMPO-Impregnated Polymeric Composite in Group Partitioning of Long-Lived Minor Actinides from Highly Active Liquid by Extraction Chromatography

Development of the MAREC Process for HLLW Partitioning Using a Novel Silica-Based CMPO Extraction Resin

Removal of Pd(II), Zr(IV), Sr(II), Fe(III), and Mo(VI) from simulated high level liquid waste by extraction chromatography utilizing the macroporous silica-based polymeric materials

Thermal Effects and Glass Crystallization in Composite Matrices for Immobilization of the Rare-Earth Element–Minor Actinide Fraction of High-Level Radioactive Waste

Heterogeneous minor actinide recycling in a boiling water reactor

Thermal Effects in the Matrix with the Rare Earth Fraction

An overview of solvent extraction processes developed in Europe for advanced nuclear fuel recycling, part 1 — heterogeneous recycling

Structural determination of a highly stable metal-organic framework with possible application to interim radioactive waste scavenging: Hf-UiO-66

Initial development of an alkaline process for recovery of uranium from 99Mo production process waste residue

Selective separation of rare earth, Sr, Mo, and Zr from simulated raffinate of uranium/plutonium co-purification process

Co‐immobilization of a PuO2 surrogate and contaminated stainless steel within a zirconolite matrix

ICONE15-10492 the INET's Progress of Silica Gel Adsorption for Zirconium

Immobilization of Actinide Radwaste into a Perovskite-Like Matrix by Self-Propagating High-Temperature Synthesis

Immobilization of NPP evaporator bottom high salt-bearing liquid radioactive waste into struvite-based phosphate matrices

Recycling of Uranium in Process of Preparation UO2 Kernels by Sol-Gel Method