Abstract:The construction of new bridge piles adjacent to existing subway tunnels poses a significant threat to the safety of the tunnels. To accurately assess the impact of the construction of the steel casing of bridge piles on nearby subway tunnels, a simplified analytical method incorporating a mechanical model is developed in this study. Specifically, modified calculation formulas for the additional force are proposed, taking into consideration the characteristics of casing segmental construction and the soil-squeezing effect. The two-stage analysis method is employed to determine the additional stress and longitudinal vertical deformation of the tunnel. Subsequently, a series of calculations are performed to gain further insights into the effects of varying lengths and diameters of bridge piles, as well as the relative distance between the pile and tunnel on the tunnel-pile interactions. As the construction depth increases, the existing tunnel experiences a slight initial rise followed by progressively larger settlement that eventually levels off. The maximum settlement exhibits a linear increase with the increasing length and diameter of the bridge piles, while it exponentially increases with decreasing relative distance between the pile and tunnel. Moreover, impact zones of varying degrees of the bridge pile construction on the nearby tunnel are proposed. Based on the Response Surface Methodology, the relative distance is found to exert the greatest influence on the deformation of the existing tunnel, and an optimal relationship among the parameters is provided. The theoretical results are well validated with field-measured data from a representative engineering project and numerical simulation results. The proposed solution can be proved to offer reasonable theoretical support for risk assessment of tunnels under the influence of adjacent piles construction.

Analysis of factors affecting stress and displacement of corrugated steel pipe culvert with large span and high depth

Analysis on Influencing Factors of Settlement of Buried Pipelines Parallel to Shield Tunnel

Theoretical Analysis of Longitudinal Vertical Displacement of Subway Tunnels Caused by the Construction of Steel Casings for Bridge Piles

Mechanical deformation characteristics of corrugated steel pipe culvert under static load

Research on bearing behaviour of buried double corrugated steel culvert with high fill considering spacing effect

Analysis of the influence of open-cut undercrossing of a national highway in Hangzhou on the existing municipal viaduct piers

Research on the Law of Stress Development Along Backfilling Process Between Crest and Valley of Buried Corrugated Steel Pipe Culverts

Comparative Experimental Study and FE Analysis of Corrugated Steel Pipe Culverts with Different Stiffness

Effects of Corrugated Steel Pipe Parameters on the Stress and Deformation of a Highway Subgrade Culvert

Study on Circular-Shaped Corrugated Steel Culvert Pipe for Highway Construction

Stress characteristics of double-row glass fiber-reinforced plastic pipe culvert with sand and optimization of load reduction parameters under adverse conditions

Structural Performance of In-Service Corrugated Steel Culvert under Vehicle Loading

Experimental study and numerical analysis of seismic response of embedded large-span corrugated steel culvert

Full-Scale Experimental Study on the Effect of Ground Surcharge on the Stress and Deformation of Shield Tunnels

Fem Simulation of an Elliptical-Shaped Corrugated Steel Culvert Pipe for Highway Construction

Confidence in life-cycle civil engineering decisions based on uncertain information

Finite Element Investigation of Corrugated Steel Pipe with Extreme Corrosion under Shallow Cover

Study on Dynamic Response of Embedded Long Span Corrugated Steel Culverts Using Scaled Model Shaking Table Tests and Numerical Analyses

Soil–structure interaction for deeply buried corrugated steel pipes Part I: Embankment installation

An Experimental Study on A Culvert Buried in Granular Soil Subjected to Vehicle Loads

Research on Deformation Characteristics of Tunnel Box Culvert Structure under Different Construction Loads