Abstract:The heat transfer and flow of nanofluids in microchannel heat sink is usually numerically investigated by the single-phase model. The thermal conductivity and viscosity of nanofluids are calculated in the whole computational region because the single-phase model, assumes the nanofluids is static and nanoparticles concentration is uniform. However for the actual forced flow process, the concentration distribution of the nanofluids is not uniform. So the thermal properties of the nanofluids vary within different computational regions. With the increase of the velocity of the nanofluids, the deviation between the prediction of single-phase model and experimental results increases. In this paper, a new simulation method is proposed to consider the inhomogeneous and dynamic thermophysical properties of the nanofluids by obtaining the nonuniformly distributed nanoparticle concentration in each numerical cell. At the same time, it takes into account the following factors: the interactions between the nanoparticles, the solid wall and the base fluid, the axial conduction, the slip boundary conditions and fluid-solid coupling. The results show that the proposed numerical simulation method further improve the simulation accuracy for the forced flow and heat transfer process of nanofluids in the microchannel in a wider range. The effects of the nanoparticles concentration, Reynolds number and axial heat transfer on the thermophysical properties of the nanofluilds, the flow and heat transfer characteristics of a rectangular microchannels with hydraulic dimensions of 341μm were analyzed using the proposed simulation model. The main results are as follows: the nanoparticles are enriched at the near wall for the fully developed region; the nonuniformity of the nanofluilds thermal conductivity coefficient distribution at the channel cross section increases with the increase of the mass flow rate and the inlet centration; under the same Reynolds number, the higher the nanofluids concentration the better the heat transfer characteristics, but there is no linear relationship between the enhancement amplitude and concentration; the heat transfer coefficient of nanofluid with 1% and 2% alumina nanoparticles concentration is about 5.86% and 8.49% higher than that of deionized water, respectively; the axial conduction effect cannot be ignored for the microchannel, which significantly affects the inlet and outlet region of the microchannel especially when the Reynolds number is low. The nanofluilds temperature in the microchannel increases with the curve and does not match the conventional linear growth hypothesis.

Thermal Dispersion Model Compared with Euler-Lagrange Approach in Simulation of Convective Heat Transfer for Nanoparticle Suspensions

Accuracy enhancement of thermal dispersion model in prediction of convective heat transfer for nanofluids considering the effects of particle migration

Simulation of Nanofluid Flow Through Rectangular Microchannel by Modified Thermal Dispersion Model

Convective Heat Transfer and Resistance Characteristics of Nanofluids with Cylindrical Particles

Studies on Evaluation of the Thermal Conductivity of Alumina Titania Hybrid Suspension Nanofluids for Enhanced Heat Transfer Applications

A Dissipative Particle Dynamics Two-Component Nanofluid Heat Transfer Model: Application to Natural Convection

Pressure Drop and Heat Transfer of Nanofluid in Turbulent Pipe Flow Considering Particle Coagulation and Breakage

Numerical Investigation of Laminar Convective Heat Transfer and Pressure Drop of Water-Based Al 2 O 3 Nanofluids in a Microchannel

Effects of Particle Surface Charge, Species, Concentration, and Dispersion Method on the Thermal Conductivity of Nanofluids

Model for Effective Thermal Conductivity of Suspensions Containing Spherical Nanoparticle Inclusions

Experimental Study on the Convective Heat Transfer of Cuo-Water Nanofluid in A Turbulent Flow

CFD simulation of nanofluid heat transfer considering the aggregation of nanoparticles in population balance model

Experimental Investigation and Prediction of the Thermal Conductivity of Water-Based Oxide Nanofluids with Low Volume Fractions

Thermal Conductivity of Nanofluids and Size Distribution of Nanoparticles by Monte Carlo Simulations

Numerical Investigation of Nanofluid Convection Performance in the Fully Developed Flow Regime of the Pipe with Constant Wall Temperature

Revisiting thermo-physical property models of Al2O3-Water nanofluid for natural convective flow

Study of the Effect of Thermal Dispersion on Internal Natural Convection in Porous Media Using Fourier Series

A spectral relaxation method for thermal dispersion and radiation effects in a nanofluid flow

Stochastic Thermal Transport Of Nanoparticle Suspensions

Finite difference simulation of natural convection of two-phase hybrid nanofluid along a vertical heated wavy surface

Thermodiffusion in model nanofluids by molecular dynamics simulations