Abstract:The research focuses on the behaviour and process parametric influence on friction stir welded Al metal matrix composites reinforced with varied percentages of SiC, B4C, and Mg. The experimentation involves fabrication of Al metal matrix composites followed by friction stir welding and, subsequently, evaluation of the joint properties in terms of mechanical strength, microstructural integrity, and quality. In comparison to other joints with varied base material compositions, the weld exhibits refined grains and uniform distribution of hybrid particles in the joint region, resulting in increased strength. Higher SiC composition adds to greater strength, better wear characteristics, and harness, whereas B4C percentage is linked to hardness. The maximum ultimate tensile stress for a particular sample was determined to be around 160MPa, while the maximum percentage elongation was found to be around 165 for 10% SiC and 3% B4C. As the amount of SiC declines and that of B4C rises, the percentage elongation decreases. In samples with a B4C weight percentage of 10%, the greatest hardness measured was around 103Hv. For a load of 30N, the wear rate was as high as 12gm/s with a SiC weight percentage of 10. For lower load values and a higher percentage of B4C, the wear rate often decreased. Chemical properties are barely changed. Therefore, the materials keep their original qualities after welding. During the non-destructive testing process, no large cracks, pores, or clusters of pores are found, indicating that the weld is of good quality. To achieve a satisfactory weld, optimal ranges based on analysis using machine learning of rotary tool speed, tool linear velocity, transverse speed are maintained. Linear Regression algorithm, Random Forest algorithm and Lasso Regression algorithms are being used and the results are also compared. This work covers a wide range of topics, and the results are found to have improved significantly in most cases and is in good agreement with data previously presented in the literatures.

Analyzing behaviour of a rail wheel assembly with alumino thermite weldment with modal analysis simulations in ANSYS

Material Optimization of Rail Track Welding and Validation using Finite Element Simulation

Vibration Nondestructive Testing of Continuous Welded Rails: A Finite Element Analysis

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

Computation and Analysis of High Frequency Vibration of Railway Wheels Using 2D Axisymmetric Model

An investigation on dynamic vibration characteristics of urban rail vehicle axle-box bearings in the presence of rail welds

An Index for Rail Weld Health Assessment in Urban Metro Using In-Service Train

A dynamic analysis of a continuous welded rail track under a longitudinal stress caused by temperature changes

Improving the technology of aluminothermic rail welding based on software simulation

Vibration-Based Approach to Measure Rail Stress: Modeling and First Field Test

Numerical Simulation on As-Welded Deflection of High Speed Rail Floor Based on Thermo-Mechanical Coupling

Simulation of welding deformation of complex structures in high-speed trains

Numerical simulation and experimental validation of the welding operation of the railcar bogie frame to prevent distortion

Dynamic constitutive model of U75VG rail flash-butt welded joint and its application in wheel-rail transient rolling contact simulation

The 3-D finite element analysis of press fitting process in railway wheel-set

Finite Element Analysis of Dynamic Characteristic on Continuous Welded Rail Track under Longitudinal Temperature Force

Evolution Characteristics of Aluminum Thermal Weld Irregularity and Damage in Heavy-Haul Railway under Different Service Conditions

Rolling Contact Fatigue Damage in Welded Rail Steel Joints

An integration of RSM and ANN modelling approach for prediction of FSW joint properties in AA7178/AA5456 alloys

VIBRATION ANALYSIS OF RAILWAY TRACK WITH MULTIPLE WHEELS ON THE RAIL

Machine Learning for Parametrical Analysis of Friction Stir Welded Aluminum Metal Matrix Composites