Abstract:Selenite (Se4+), a significant source of water pollution above the permissible limits, is considered a valuable metal by environmentalists. In this study, we described a novel electrochemical sensor that utilized a carbon paste electrode (CPE) that was modified using multiwall carbon nanotubes (MWCNTs) and poly(1-aminoanthraquinone) (p-AAQ) for finding Se4+ in water samples. Electrochemical quantification of Se4+ depends on the formation of a selective complex (piaselenol) with p-AAQ. In this work, we prepared a CPE modified by physical embedding of MWCNTs and 1-aminoanthraquione (AAQ), while the polymer film was formed by anodic polymerization of AAQ by applying a constant potential of 0.75 V in 0.1 M HCl for 20 s followed by cyclic voltammetry (CV) from -0.2 to 1.4 V for 20 cycles. The modified CPE was used for differential pulse voltammetry (DPV) of Se4+ in 0.1 M H2SO4 from 0 to 0.4 V with a characteristic peak at 0.27 V. Further, the proposed sensor was characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and electrochemical impedance spectroscopy (EIS). The analytical conditions regarding the electrode performance and voltammetric measurements were optimized, with the accumulation time and potential, supporting electrolyte, differential-pulse period/time, and amplitude. The EIS results indicated that the p-AAQ/MWCNTs-modified CPE sensor (p-AAQ/MWCNTs/CPE) that also exhibited low charge-transfer resistance (R ct) toward the anodic stripping of Se4+, exhibited good analytical performance toward different concentrations of Se4+ in a linear range of 5-50 μg L-1 Se4+ with a limit of determination (LOD) of 1.5 μg L-1 (3σ). Furthermore, differential-pulse voltammetry was employed to determine different concentrations of Se4+ in a linear range of 1-50 μg L-1 Se4+, and an LOD value of 0.289 μg L-1 was obtained. The proposed sensor demonstrated good precision (relative standard deviation = 4.02%) at a Se4+ concentration of 5 μg L-1. Moreover, the proposed sensor was applied to analyze Se4+ in wastewater samples that were spiked with Se, and it achieved good recovery values.

Nickel-aluminum layered double hydroxide as a nano-sorbent for the solid phase extraction of selenium, and its determination by continuous flow HG-AAS

On-line Organoselenium Interference Removal for Inorganic Selenium Species by Flow Injection Coprecipitation Preconcentration Coupled with Hydride Generation Atomic Fluorescence Spectrometry.

Molybdenum-Oxysulfide-Functionalized MgAl-Layered Double Hydroxides─A Sorbent for Selenium Oxoanions

Ultrasensitive determination of selenium in water and food samples by ICP-MS: UiO-66-NH 2 for preconcentration and direct slurry hydride generation

Determination Of Ultra-Trace Amounts Of Selenium In Environmental Samples By Sequential Injection-Hydride Generation-Nondispersive Atomic Fluorescence Spectrometry

Application of modified nano-alumina as a solid phase extraction sorbent for the preconcentration of Cd and Pb in water and herbal samples prior to flame atomic absorption spectrometry determination

Graphene oxide as an efficient adsorbent of solid-phase extraction for online preconcentration of inorganic and organic mercurials in freshwater followed by HPLC-ICP-MS determination

Highly efficient natural deep eutectic solvent-based liquid-liquid microextraction and inductively coupled plasma mass spectrometry for selective determination of inorganic selenium species in nut samples

Flow Injection On-Line Sorption Preconcentration Coupled with Hydride Generation Atomic Fluorescence Spectrometry Using A Polytetrafluoroethylene Fiber-Packed Microcolumn for Determination of Se(Iv) in Natural Water

Alkaline fusion-alkaline mode HG-ICP spectrometry for selenium determination

Speciation analysis of inorganic selenium in food and water samples utilizing a 2,3-diaminonaphthalene post-synthetic modified magnetic metal–organic framework

Alumina modified by dimethyl sulfoxide as a new selective solid phase extractor for separation and preconcentration of inorganic mercury(II)

Selenium Oxoanions Removal from Wastewater by MoS42− Intercalated FeMgAl LDH: Catalytic Roles of Fe and Mechanism Insights

Speciation and Pre-Concentration of Selenium with Nano-ZnO as Absorbent in Environmental Samples

Voltammetric and impedimetric determinations of selenium(iv) by an innovative gold-free poly(1-aminoanthraquinone)/multiwall carbon nanotube-modified carbon paste electrode

Stability of selenium and its speciation analysis in water using automatic system separation and HR-ICP-MS measurement

Selective solid phase extraction and preconcentration of mercury(II) from environmental and biological samples using nanometer silica functionalized by 2,6-pyridine dicarboxylic acid

Magnetic dispersive solid phase extraction using modified magnetic multi-walled carbon nanotubes combined with electrothermal atomic absorption spectrometry for the determination of selenium

Determination and speciation of trace and ultratrace selenium ions by energy-dispersive X-ray fluorescence spectrometry using graphene as solid adsorbent in dispersive micro-solid phase extraction

Adsorptive Removal of Selenium(IV) from Aqueous Solution by Ferrous Hydroxide Complex-Zero Nickel Composites

An automated microtechnique for selenium determination in human body fluids by flow injection hydride atomic absorption spectrometry (FI-HAAS)