Abstract:Hyperbranched polyethylene (HBPE) is a new type of polyethylene materials in addition to low-density polyethylene (LDPE), high-density polyethylene (HDPE), and linear low-density polyethylene (LLDPE). It has dendrimer-like compact globular structures. Due to lack of chain entanglements, it exhibits better solubility and lower viscosity than the other types of polyethylene. HBPE has attracted great attention in the recent years in both academic and industrial researches. However, as polyolefin materials, HBPE suffers from such shortcomings as nonpolar nature and thus lack of functionalities. These shortcomings limit its applications. Grafting of polar molecules such as maleic anhydride (MAH) has been widely adopted in the modification of polyolefins.In this work, HBPE samples having high molecular weight (M-w = 8 x 10(6) g/mol) and high branching density (the number of branches per 1000C = 108) were synthesized by solution polymerization of ethylene with a late transition metal catalyst, namely bi (2, 6-diispropylphenyl) butane diimine nickel dibromide (IBNB) at 45 degrees C and 0.5 MPa. The Ni catalyst is well-known to experience a chain walking mechanism that is responsible for the hyperbranched chain topology. H-1-NMR and C-13-NMR were used to examine the branching density and the type of branches, respectively. It was discovered that the types of branches were mainly methyl (50.54 %) and butyl (20.30%).MAH was grafted onto HBPE through a free radical mechanism. Di-tert amyl peroxide (DTAP) was used as the free radical initiator. However, it was found that the HBPE/MAH/DTAP grafting system experienced severe chain degradation and crosslinking side reactions during the grafting process. N, N-diethyl cinnamamide (DECA) was thus synthesized by the use of cinnamoyl chloride, diethylamine, and triethylamine which was used as an acid-binding reagent. DECA was then used as an inhibitor to suppress the side reactions. The approach was successful and efficient. The gel content in the grafting products was remarkably reduced from 55.38% to 5.15%. The M. was almost doubled in reference to the use of MAH and peroxide DTAP only. The observation suggests that the chain degradation and crosslinking side reactions were dramatically suppressed with the addition of DECA.Compared to the other investigated inhibitors such as styrene (St), N, N-dimethylacetamide (DMAC), 3-(2-furyl) acrylic acid (FAA) and ethyl cinnamate (ECA), DECA was found to be the most effective in suppressing both chain degradation and crosslinking side reactions. We also found that FAA and ECA could effectively suppress the chain degradation in the grafting system, but the grafting system had high gel contents and experienced severe crosslinking. St and DMAC had some effects on inhibiting crosslinking, but there was still small amount of crosslinking. The proposed mechanism is that DECA reacts first with HBPE macroradicals to form stable macroradicals when DECA is added to the grafting system. The latter then reacts (or copolymerizes) with MAH to form MAH-grafted HBPE. Because the formed stable macromolecules contain amide group, both the chain degradation and crosslinking side reactions are effectively suppressed.In general, in the presence of radical initiator, HDPE mainly experiences crosslinking, while polypropylene undergoes chain scission. LDPE and LLDPE have both reactions simultaneously occurring. HBPE is more or less similar to the low-density materials having simultaneous crosslinking and degradation. In the grafting studies, these side reactions need to be controlled. The current work elucidates the grafting mechanisms and provides practical guidance in this regard.

A synthetic approach for water soluble hyperbranched poly(N,N-ethylidenebis(N-2-chloroacetyl acrylamide)) with high degree of branching via atom transfer radical polymerization/self-condensing vinyl polymerization

Synthesis and characterization of hyperbranched polyacrylamide using semibatch reversible addition-fragmentation chain transfer (RAFT) polymerization

One‐step Synthesis of Hyperbranched Polyethylene Macroinitiator and Its Block Copolymers with Methyl Methacrylate or Styrene Via ATRP

Synthesis Backbone-Dual-responsive of Hyperbranched Poly(bis(n,n-Ethyl Acrylamide))s by RAFT

Preparation and Properties of Hyperbranched Poly(amine‐ester) Films Using Acetal Cross‐linking Units

GRAFTING OF MALEIC ANHYDRIDE ONTO HYPERBRANCHED POLYETHYLENE AND SUPPRESSION OF CHAIN DEGRADATION AND CROSSLINKING SIDE REACTIONS

Facile Polycyclotrimerization of "simple" Arylene Bipropiolates: A Metal-Free, Regioselective Route to Functional Hyperbranched Polymers with High Optical Transparency, Tunable Refractive Index, Low Chromatic Aberration, and Photoresponsive Patternability

Amine-catalyzed Polycyclotrimerization of Arylene Bipropiolate: A Metal-Free and Regioselective Route to Hyperbranched Polymer

A New Polymerisation Route to Conjugated Polymers: Regio- and Stereoselective Synthesis of Linear and Hyperbranched Poly(Arylene Chlorovinylene)S by Decarbonylative Polyaddition of Aroyl Chlorides and Alkynes

A Novel Hyperbranched Polyester Made from Aconitic Acid (B3) and Di(ethylene Glycol) (A2)

SYNTHESIS OF ASYMMETRIC HYPERBRANCHED POLY(AMIDE-ESTER)S FROM BENZENE-1,2,4-TRICARBOXYLIC ACID-1,2-ANHYDRIDE AND DIETHANOLAMINE

Water Soluble Hyperbranched Polymers from Controlled Radical Homopolymerization of Peg Diacrylate

Synthesis of water-soluble hyperbranched polymer with alternating amido, tertiary amino and ester units from benzene-1,2,4-tricarboxylic acid-1,2-anhydride find N-(2-hydroxyethyl)piperazine

Preparation of Water-Soluble Hyperbranched Poly(sulfone-Amine)s by Polyaddition of N-ethylethylenediamine to Divinyl Sulfone

Hydrophilic Poly(meth)acrylates by Controlled Radical Branching Polymerization: Hyperbranching and Fragmentation

Synthesis and Characterization of Water‐soluble Hyperbranched Poly(ester Amine)s from Diacrylates and Diamines

Thermoresponsive Hyperbranched Polymers Via in Situ RAFT Copolymerization of Peg‐based Monomethacrylate and Dimethacrylate Monomers

Hyperbranched Polyacrylate Copolymers Synthesized by Self-Condensing Vinyl Copolymerization in the Presence of A Tetrafunctional Initiator

Facile Polymerization of Water and Triple-Bond Based Monomers Toward Functional Polyamides

Synthesis and characterization of poly(vinyl chloride)-g-poly (2-hydroxyethyl methacrylate) copolymers

Water-Soluble and Clickable Segmented Hyperbranched Polymers for Multifunctionalization and Novel Architecture Construction