Abstract:Four polydimethylsiloxane (PDMS) coatings with different surface free energies have been prepared and applied to smooth and roughened aluminum plates to form hydrophobic and superhydrophobic surfaces. Their surface wettability in terms of water contact angle (CA), sliding angle (SA) and water droplet impact dynamics was studied under an ambient (50% relative humidity, RH at 25 degrees C) and three different condensing environments (low, highly and extremely condensing, i.e. 30%, 60% and 90% RH at 10 degrees C). In addition, the surface ice adhesion was investigated under the extremely condensing condition. Different PDMS coatings on either smooth or roughened surfaces displayed a very similar impact to static and dynamic wettability under the ambient environment. However, the water impact behavior and ice adhesion under the extremely condensing condition between the hydrophobic and superhydrophobic surfaces are significantly different. One of the superhydrophobic surfaces (R2180) demonstrated an excellent water repelling capability to retard ice accumulation, and reduced ice adhesion strength even under the extremely condensing condition, and thus will be a good candidate for ice-phobic applications. This excellent ice-phobic property is attributed to the low surface free energy of the coating, which effectively prevents the water condensation inside the cavities of the hierarchical superhydrophobic structures and thus maintains "air cushion" on the solid/water interface, indicated by a very low solid-liquid contact area increase after surface is exposed to this condensing weather condition. This result demonstrates that the "air cushion" in a superhydrophobic surface could be maintained even under an extremely condensing condition by carefully selection of coating composition with a very low surface free energy. (C) 2016 Elsevier B.V. All rights reserved.

Anti-Icing Property of Superhydrophobic Octadecyltrichlorosilane Film and Its Ice Adhesion Strength

Fabrication of Modifier-Free Superhydrophobic Surfaces with Anti-Icing and Self-Cleaning Properties on Ti Substrate by Anodization Method

Verification of icephobic/anti-icing properties of a superhydrophobic surface.

Preparation of a superhydrophobic coating based on polysiloxane modified SiO2 and study on its anti-icing performance

Anti-icing Performance of Super-Wetting Surfaces from Icing-Resistance to Ice-Phobic Aspects: Robust Hydrophobic or Slippery Surfaces

Facile synthesis and anti-icing performance of superhydrophobic flower-like OTS-SiO2 with tunable size

Superhydrophobic and Anti-Icing Properties at Overcooled Temperature of A Fluorinated Hybrid Surface Prepared Via A Sol-Gel Process

Spraying Fabrication of Durable and Transparent Coatings for Anti-Icing Application: Dynamic Water Repellency, Icing Delay, and Ice Adhesion

Preparation of SiO2 resin coating with superhydrophobic wettability and anti-icing behavior analysis

Multi-applicable, durable superhydrophobic anti-icing coating through template-method and chemical vapor deposition

An abrasion-resistant, photothermal, superhydrophobic anti-icing coating prepared by polysiloxane-modified carbon nanotubes and fluorine-silicone resin

Super-Hydrophobic/Icephobic Coatings Based on Silica Nanoparticles Modified by Self-Assembled Monolayers

A Novel Superhydrophobic Hybrid Nanocomposite Material Prepared by Surface-Initiated Aget Atrp and Its Anti-Icing Properties

The Icephobicity Comparison of Polysiloxane Modified Hydrophobic and Superhydrophobic Surfaces under Condensing Environments

Fabrication and Characterization of Superhydrophobic Surfaces on Aluminum Alloy Substrates

Fluorine-Free and Transparent Superhydrophobic Coating with Enhanced Anti-Icing and Anti-Frosting Performance by Using D26 and KH560 as Coupling Agents

Fabrication of Superhydrophobic Coatings by Using Spraying and Analysis of Their Anti-Icing Properties

Icephobicity Studies of Superhydrophobic Coating on Aluminium

Oil-Infused Superhydrophobic Silicone Material for Low Ice Adhesion with Long-Term Infusion Stability

Anti-frosting and Defrosting on Photothermal Superhydrophobic Coatings Based on Silane Hydrolysis and Carbon Nanotube Doping

Heat Stability and Icing Delay on Superhydrophobic Coatings in Facile One Step