Abstract:Many low-cost particle sensors are available for routine air quality monitoring of PM 2.5 , but there are concerns about the accuracy and precision of the reported data, particularly in humid conditions. The objectives of this study are to evaluate the Sensirion SPS30 particulate matter (PM) sensor against regulatory methods for measurement of real-time particulate matter concentrations and to evaluate the effectiveness of the Intelligent Air TM sensor pack for remote deployment and monitoring. To achieve this, we co-located the Intelligent Air TM sensor pack, developed at Clemson University and built around the Sensirion SPS30, to collect data from July 29, 2019, to December 12, 2019, at a regulatory site in Columbia, South Carolina. When compared to the Federal Equivalent Methods, the SPS30 showed an average bias adjusted R 2 = 0.75, mean bias error of −1.59, and a root mean square error of 2.10 for 24-hour average trimmed measurements over 93 days, and R 2 = 0.57, mean bias error of −1.61, and a root mean square error of 3.029, for 1-hr average trimmed measurements over 2300 hours when the central 99% of data was retained with a data completeness of 75% or greater. The Intelligent Air TM sensor pack is designed to promote long-term deployment and includes a solar panel and battery backup, protection from the elements, and the ability to upload data via a cellular network. Overall, we conclude that the SPS30 PM sensor and the Intelligent Air TM sensor pack have the potential for greatly increasing the spatial density of particulate matter measurements, but more work is needed to understand and calibrate sensor measurements. Implications: This work adds to the growing body of research that indicates that low-cost sensors of particulate matter (PM) for air quality monitoring has a promising future, and yet much work is left to be done. This work shows that the level of data processing and filtering effects how the low-cost sensors compare to existing federal reference and equivalence methods: more data filtering at low PM levels worsens the data comparison, while longer time averaging improves the measurement comparisons. Improvements must be made to how we handle, calibrate, and correct PM data from low-cost sensors before the data can be reliably used for air quality monitoring and attainment.

Validation of low-cost ozone measurement instruments suitable for use in an air-quality monitoring network

Data Verification Tools for Minimizing Management Costs of Dense Air-Quality Monitoring Networks

Field testing of new-technology ambient air ozone monitors

Reliable data from low cost ozone sensors in a hierarchical network

Performance Evaluation and Community Application of Low-Cost Sensors for Ozone and Nitrogen Dioxide

A Low-Cost Calibration Method for Temperature, Relative Humidity, and Carbon Dioxide Sensors Used in Air Quality Monitoring Systems

Stationary and portable multipollutant monitors for high-spatiotemporal-resolution air quality studies including online calibration

Calibration of CO, NO2, and O3 Using Airify: A Low-Cost Sensor Cluster for Air Quality Monitoring

Low-Cost Air Quality Sensor Network in Munich

Low-Cost Outdoor Air Quality Monitoring and Sensor Calibration: A Survey and Critical Analysis

Monitoring Ozone Using Portable Substrate-Integrated Hollow Waveguide-Based Absorbance Sensors in the Ultraviolet Range

Using Low-Cost Sensors to Monitor Indoor, Outdoor, and Personal Ozone Concentrations in Beijing, China.

Low-cost sensors as an alternative for long-term air quality monitoring

Hierarchical network design for nitrogen dioxide measurement in urban environments, part 2: network-based sensor calibration

Developing a Low-Cost Wearable Personal Exposure Monitor for Studying Respiratory Diseases Using Metal–Oxide Sensors

Impact Analysis of Temperature and Humidity Conditions on Electrochemical Sensor Response in Ambient Air Quality Monitoring

Low-cost Air Quality Sensing Process: Validation by Indoor-Outdoor Measurements

Feasibility of low-cost particulate matter sensors for long-term environmental monitoring: Field evaluation and calibration

Development of a Portable Ozone Generation System for Calibration of Online Ozone Water Analyzers

Evaluation of a new low-cost particle sensor as an internet-of-things device for outdoor air quality monitoring

Developing a Cloud-Based Air Quality Monitoring Platform Using Low-Cost Sensors