Abstract:The evolution of microstructure upon partial crystallization and its influence on the mechanical properties such as hardness, elastic modulus and viscosity in a La55Al25Cu10Ni5Co5 bulk metallic glass alloy are studied. Specimens with various volume fractions of crystalline phases were obtained by annealing the as, cast amorphous alloy above its glass transition temperature and were characterized by transmission electron microscopy. Microscopic examination of the heat-treated samples shows short-range-ordered domains prior to nanocrystallization within the amorphous matrix, followed by the growth and impingement of the crystallites. Whereas the hardness of the annealed samples increases linearly with increasing crystallinity, the elastic modulus and the viscosity both increase abruptly when the crystalline volume fraction is about 40 vol. %, with a only minor variation on either side of this range. The sudden rises in the modulus and viscosity are similar to those in the literature data on the fracture strength of partially crystallized bulk amorphous alloys that shows a steep drop in strength at 30-50vol.% crystallinity. On the basis of the microscopic observations, it is suggested that the interaction and formation of rigid networks of crystalline phases upon the attainment of a critical second-phase volume fraction may be the possible reason for the sudden change in mechanical properties. Percolation theory is utilized in further substantiating this hypothesis.

Application of Microacoustical Technique to Study Elastic Properties and Microstructure of New Generation of Bulk Metallic Glasses

Elastic properties of Cu60Zr20Hf10Ti10 bulk metallic glass under high pressure

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

Elastic Properties of Pd40Cu30Ni10P20 Bulk Glass in Supercooled Liquid Region

Pd40Ni40Si5P15 Bulk Metallic Glass Properties Variation As a Function of Sample Thickness

Softening in an ultrasonic-vibrated Pd-based metallic glass

Elastic Anomaly and Polyamorphic Transition in (La, Ce)-based Bulk Metallic Glass under Pressure

Crystallization Behavior and Mechanical Properties of Cu-based Bulk Metallic Glass Composites

Understanding the Structure-Poisson’s Ratio Relation in Bulk Metallic Glass

Microstructure in a Ni60Pd20P17B3 Bulk Metallic Glass Compressively Fractured at Cryogenic Temperature

La-based bulk metallic glass failure analysis under static and dynamic loading

Microstructure and Mechanical Properties of A Partially Crystallized La-Based Bulk Metallic Glass

Mechanical Properties for a Series of Zr-based Bulk Metallic Glasses

Structural Behavior of Pd40Cu30Ni10P20 Bulk Metallic Glass below and above the Glass Transition

Crystallization and Thermally Induced Surface Relief Effects in A Mg65cu25y10 Bulk Metallic Glass

Analyses of Shear Band Emission in a Mg-based Bulk Metallic Glass Deformed at Different Nanoindentation Rates

Non-destructive evaluation of bulk metallic glass components using resonance ultrasound spectroscopy

Investigation of Deformation Behavior of Zr-Ti-Ni-Cu-Be Bulk Metallic Glass Containing Nanocrystals

Spatial–Temporal evolution of shear banding in bulk metallic glasses

Thermal expansion of La-based BMG studied by in situ high-energy X-ray diffraction

Mechanical Properties of Monolithic Zr62Al8Ni13Cu17 Bulk Metallic Glass