Abstract:The design and development of thermal insulation materials is very important for the treatment of offshore oil pipelines. Understanding thermal energy transport in thermal insulation materials and predicting their thermal conductivities have important theoretical and practical value for the design of thermal insulation materials. In this work, lightweight and thermally insulated (LWTI) composites with the desired mechanical strength for offshore oil pipelines applications were prepared using epoxy resin (EP) as the matrix and hollow glass microspheres (HGMs) as the filler. The morphology, density, and mechanical properties of HGM/EP LWTI composites were studied first. The flexural strength and the flexural modulus of HGM/EP LWTI composites could still be as high as 22.34 ± 2.75 Mpa and 1.34 ± 0.03 GPa, respectively, while the density was only 0.591 g/cm3. The relationship between the effective thermal conductivity of HGM/EP LWTI composites and material parameters (sizes and contents together) has been studied systematically. A three-phase prediction model was built using the self-consistent approximation method to predict the effective thermal conductivity of HGM/EP LWTI composites, and the resin matrix, the wall thickness, the HGM particle size, and other parameters (such as air) were fully considered during the derivation of this three-phase thermal conductivity model. Finally, the insulation mechanism of HGM/EP LWTI composites was systematically analyzed. The thermal conductivities of HGM/EP LWTI composites with different diameters and HGM contents calculated by the three-phase prediction model agreed well with the experimental test results, with a minimum error of only 0.69%. Thus, this three-phase thermal conductivity model can be used to theoretically simulate the thermal conductivity of epoxy resin-based LWTI composites and can be the theoretical basis for the design and prediction of the thermal conductivity of other similar hollow spheres filled materials.

Design and Validation of Thermal Insulation for Deep-sea Fluid Sampler of Jiaolong Human Occupied Vehicle

Application of SiO2Aerogel in Thermal Protective Textiles

A Deep-Sea Large-Volume High-Pressure Simulation System—design, Analysis and Experimental Verification

Study on Thermal Insulation Performance of Silica Aerogel Thermal Insulation Blankets

Thermal Performance Study for Hybrid SOFI and MLI System Used in Space

Development of Multilayer Insulation Blanket of Aerogel With Ultra-Low Thermal Conductivity

Design and Verification of a Deep Rock Corer with Retaining the In Situ Temperature

Research on an Active Heat Insulation Device for the Hadal Sample

Investigation of the Thermal Conductivity of Resin-Based Lightweight Composites Filled with Hollow Glass Microspheres

Optimal Design of A Novel Hydrothermal Fluid Sampler

Active temperature-preserving deep-sea water sampler configured with a pressure-adaptive thermoelectric cooler module

Preparation and Characteristic of the Novel Multiple-Layer Thermal Insulation Nanocomposite Materials

Design and performance verification of thermal protection structure of high temperature probe in aeroengine

Thermal Insulation Performance of Monolithic Silica Aerogel with Gas Permeation Effect at Pressure Gradients and Large Temperature Differences

Thermal Insulation Performance of Silica Aerogel Composites Doped with Hollow Opacifiers: Theoretical Approach

Ultra-Light and Ultra-Low Thermal Conductivity of Elastic Silica Nanofibrous Aerogel with TiO2 Opacifier Particles as Filler

A novel combustion drying technology for in-situ preparation of glass fiber composite SiO2 aerogel thin felt with excellent thermal insulation performance

Design and strength analysis of the passive thermal insulation structure of a deep rock in-situ thermal insulation coring system

Robust-flexible and highly-thermostable polyimide-silica aerogels with adjustable fiber skeleton structure for efficient aerospace thermal protection

Fabrication of thermal insulation sodium alginate/SiO 2 composite aerogel with superior radiative cooling function for firefighting clothing

Subsea Pipeline Hybrid Thermal Insulation with Phase Change Material and Aerogel – Analysis and Experiments