Abstract:This research investigates the control of thickness and weight in plastic extrusion vacuum-thermoforming products to identify optimal key parameters for cost reduction and energy savings. The initial step involves identifying crucial influencing factors. In this step, the Delphi technique was employed through a questionnaire administered to a panel of expert scholars to ensure minimal error and maximal reliability in determining key influencing factors. Consensus was sought to establish appropriateness and consistency. Subsequently, the Taguchi method was applied for quality design and planning of the extrusion vacuum-forming process. The experimental design parameters were selected using an L18 (21 × 37) orthogonal array, and the desired quality characteristics were determined. Comparative analysis of quantitative production data from two consecutive experiments was conducted, and based on F-values and contribution analysis, the combination of control factors maximizing the Signal-to-Noise (S/N) ratio was identified. The objective is to seek optimal parameters for improving the quality of the plastic polypropylene (PP cup lid) manufacturing process, reducing process variability, and identifying the most robust production conditions. Through multiple actual production prediction experiments, it was determined that five control factors, "polypropylene new material ratio," "T-die lips adjustment thickness", "mirror wheel temperature stability", "molding vacuum pressure time", and "forming mold area design", contribute to the maximization of the S/N ratio, i.e., minimizing variability. Statistical validation confirms a significant improvement in product quality and weight control. Noteworthily, the quality control model and experimental design parameters established in this study are also applicable to other plastic products and bio-based materials, such as PET, HIPS, and biodegradable PLA lids with added calcium carbonate. The results of the experimental production demonstrate its ability to consistently control product weight within the range of 3.4 ± 0.1 g, approaching the specified tolerance limits. This capability results in approximately 2.6% cost savings in product weight, contributing significantly to achieving a company's KPI goals for environmental conservation, energy efficiency, and operational cost reduction. Therefore, the findings of this study represent a substantial and tangible contribution.

Investigation of the influence of technological parameters on surface color of plastic parts

Process Control of Injection Molding Based on Multiscale Visualization Methodology - A Case Study

Parameter Optimization of Roundness Quality Control for Machined Parts Based on Grey relational Analysis

Evaluating Processing Parameter Effects on Polymer Grades and Plastic Coloring: Insights from Experimental Design and Characterization Studies

Study of Material Color Influences on Mechanical Characteristics of Fused Deposition Modeling Parts

An Investigation to Reduce the Effect of Moisture on Injection-Molded Parts through Optimization of Plasticization Parameters

Research and application of product material texture image model

Simulation and Experimental Study on Enhancing Dimensional Accuracy of Polycarbonate Light Guides

A Study on the Effects of Process Parameters on Swirl Marks of Microcellular Injection Molded PC Parts

Process Parameters Optimization Using a Novel Classification Model for Plastic Injection Molding

The Impact of Surface Roughness on Conformal Cooling Channels for Injection Molding

Development of a Machine Learning Model to Predict the Color of Extruded Thermoplastic Resins

Applying the Taguchi Method to Improve Key Parameters of Extrusion Vacuum-Forming Quality

Study of Injection Molding Process to Improve Geometrical Quality of Thick-Walled Polycarbonate Optical Lenses by Reducing Sink Marks

The Influential Effect of Molding Parameters on Quality of Part Manufactured by Rapid Heat Cycle Molding Technology

Experimental investigation and optimization of process parameters on digital light processing (DLP) 3D printing process based on Taguchi-grey relational analysis

Effect of processing parameter changes on mechanical properties during injection molding: Amorphous versus semi‐crystalline materials

Optimization of the injection molding process for the PC/ABS parts by integrating Taguchi approach and CAE simulation

Investigation of the Effect of Molding Variables on Sink Marks of Plastic Injection Molded Parts Using Taguchi DOE Technique

Parameter analysis of multi-objective optimization for energy efficiency and multiple quality aspects in injection molding

Color Reproduction Accuracy Promotion of 3D-Printed Surfaces Based on Microscopic Image Analysis