Abstract:Rock strength is generally divided into the components of cohesion and internal friction. These components are two important parameters for estimating the damaged or disturbed zone around an excavation and its corresponding support design. However, the cohesive and frictional strength components at the same strain increment before peak strength are difficult to separate from each other. In addition, the misperception of their mutual evolution has been in existence for a long time. A numerical code, Rock Failure Process Analysis (RFPA2D), based on the finite element method was used in this study to clarify this misperception. The RFPA2D approach can account for rock heterogeneity and capture the entire rock failure process without prior assumptions regarding where and how microcracks and fracturing develop. Numerical models of rock were copied and reused in uniaxial and biaxial tests to create identical heterogeneous models for use under different confining stress conditions. Forty-five numerical tests (5 homogeneity indexes × 9 confining pressures) were used to calculate the results of the principal stresses (σ1 and σ3) at specified increments of axial strain. The intercept and the slope of a linear line fitting to the principal stresses at the same strain before peak strength were obtained in the principal stress space. The intercept is related to the cohesive strength component of the shear resistance, and the slope of the linear line is a pseudo-internal friction coefficient. Through the analysis of the linear fitting results, it has been found that the cohesive strength component increases while the pseudo-internal friction coefficient decreases with increasing homogeneity index of the numerical rock models. The values of cohesion and internal friction vary as a function of the strain state, and they are immediately activated with a strain increment before peak strength. The research results strengthen the understanding of the mobilization of the load-bearing capacity of rock mass surrounding an opening and can improve the design of practical support systems.

Calculating the cohesion and internal friction angle of volcanic rocks and rock masses

Preliminary Study of Two-Scale Model for Analyzing Brittle Rock Based on Asymptotic Expansion Method

Modeling Rock Failure Using the Numerical Manifold Method Followed by the Discontinuous Deformation Analysis

Theoretical Model for the Shear Strength of Rock Discontinuities with Non-Associated Flow Laws

A New Perspective on the Constant Mi of the Hoek–Brown Failure Criterion and a New Model for Determining the Residual Strength of Rock

Modified Mohr–Coulomb criterion for nonlinear strength characteristics of rocks

Numerical study of the evolution of cohesion and internal friction in rock during the pre-peak deformation process

Modified minimum principal stress estimation formula based on Hoek-Brown criterion and equivalent Mohr-Coulomb strength parameters

Prediction of Mechanical Properties of Igneous Rocks Under Combined Compression and Shear Loading Through Statistical Analysis

Quantifying the physical and mechanical heterogeneity of porous volcanic rocks from the Chaîne des Puys (Massif Central, France)

Results from a systematic analysis of fully coupled Thermo-Hydro-Mechanical-Chemical rock models

Size-dependent Mohr–Coulomb failure criterion

Stress-dependent Mohr-Coulomb shear strength parameters for intact rock

Employing frictional parameters in estimating the Hoek-Brown constant mi for intact rocks

Friction Coefficients Calculation via Surface Roughness Characterization for Tight Sedimentary Rocks

Integration of rock joint roughness into the Mohr-Coulomb shear behaviour model – application to dam safety analysis

Triaxial mechanical properties and precursors of instability damage in rocks with different laminar dip angles

The modification of Mohr-Coulomb criteria based on shape function and determination method of undetermined parameters

Computational Modeling of Tool-Rock Frictional Contact With Anisotropic Damage

The cohesive strength and the friction angle in rock-soil triaxial rests

Revealing Size Effect and Associated Variability of Rocks Based on BPM–μDFN Modelling: Significance of Internal Microstructure and Strain Rate