Abstract:As the advancement of deep earth energy engineering in the 21st century, the challenges imposed by dynamic loads and high temperatures will be increasingly regular. This paper studied the dynamic mechanical behaviors and fracture characteristics of defective red sandstone (single fissure inclination of 0°, 30°, 60°, and 90°) subjected to thermal treatments (25 °C, 200 °C, 400 °C, 600 °C, and 800 °C) under descending amplitude low cycle (DALC) impact loading. The experiments were conducted using a modified split Hopkinson pressure bar (SHPB) system, and the fracture surfaces of the failed specimens were characterized through the use of high-resolution 3D laser scanning to obtain point cloud data. Subsequently, the fractal, roughness, texture, and elevation features of fracture surfaces were analyzed using the boxing-counting method, grayscale co-occurrence matrix (GLCM), and elevation-based statistics. The scanning electron microscopy (SEM) was utilized to study the fracture micromorphology as well. Additionally, the mechanisms of damage and fracture evolution were discussed based on the results of X-ray diffractometry (XRD), synchronous thermal analysis (STA), discrete element method (DEM), and strain energy density theory. The results demonstrate that the peak stress and dynamic elastic modulus deteriorate with rising temperatures and increase with larger fissure angles. While the peak strain, strain rate, and peak stress increase factor (PIF) exhibit the opposite trend. The threshold values for the intensification of these events are 400 °C and 60°. The damage is dominated by tensile cracks, which transition to shear at 30° and 60° due to temperature dependence. Meanwhile, the fractal dimension (D C ), joint roughness coefficient (JRC), second-order statistics of GLCM, and elevation eigenvalues have been modeled using multiple regression analysis to investigate their interaction with temperature and fissure angle. The best-fit models illustrate significant linear or non-linear correlations between the aforementioned parameters and the mechanical parameters. Furthermore, the magnitude and distribution pattern of thermal cracks, as well as the growth of shear fractures, are governed by the dehydration, thermal expansion, phase transition, plasticization, thermal fracture, and thermal decomposition. Finally, strain energy density theory manifests promising prospects for understanding and predicting DALC impact fracture patterns of specimens.

Triaxial mechanical properties and precursors of instability damage in rocks with different laminar dip angles

An Experimental Investigation on the Foliation Strike-Angle Effect of Layered Hard Rock under Engineering Triaxial Stress Path

Cracking Behavior and Acoustic Emission Characteristics of Heterogeneous Granite with Double Pre-Existing Filled Flaws and a Circular Hole under Uniaxial Compression: Insights from Grain-Based Discrete Element Method Modeling

Experimental research on the mechanical properties and energy transfer of fractured granite under triaxial loading

Mechanical characteristics and energy evolution in a rock mass with a weak structural plane

Mechanical properties and acoustic emission characteristics of two dissimilar layers of rock-like specimens with prefabricated parallel fissures

Dip effect on the orientation of rock failure plane under combined compression–shear loading

Experimental investigation of a fissured rock with thermal storage potential subjected to descending amplitude low cycle impacts

Thermal Infrared Precursor Information of Rock Surface during Failure Considering Different Intermediate Principal Stresses

Experimental research on the mechanical and acoustic emission properties of layered sandstone during tensile failure

Experimental study on instability failure of rock mass with rough joints under one-side constraint compression

Experimental Study on the Anisotropy of Layered Rock Mass under Triaxial Conditions

A Numerical Study of the Mechanical Behavior of Jointed Soft Rocks under Triaxial Loading Using a Bonded Particle Model

Experimental Study on Precursor Characteristics of Rock Failure Based on Strain and Temperature Changes

Mechanical Behaviour and Failure Modes of High-Temperature Jointed Granite Based on DIC and AE Technology

Failure and mechanical behavior of transversely isotropic rock under compression-shear tests: Laboratory testing and numerical simulation

Numerical studies on micro-cracking behavior of transversely isotropic argillaceous siltstone in Longyou Grottoes under three-point bending

Numerical simulations on the structural heterogeneity and fracture bias effect of three-point bending specimen

Study on physico‐mechanical characterization of rock-like material with bedding planes under coupled static and dynamic cyclic loadings

Study on stress relaxation and acoustic emission of fractured rocks with different fissure inclinations

Different rock failure precursors using displacement coordination coefficient