Abstract:In this work, a novel sol-gel coating of N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (AAPTS)-silica was prepared for capillary microextraction (CME) of trace Cu, Zn, Ni, Hg and Cd followed by on-line ICP-MS detection. This organic-inorganic hybrid coating was in situ created on the inner walls of fused silica capillary using a sol solution containing tetramethoxysilane (TMOS) as a precursor, AAPTS as a co-precursor, ethanol as the solvent and cetyltrimethylammonium bromide (CTAB) as the template. The structure of the capillary coating was characterized by IR, SEM and TEM. Various experimental parameters affecting capillary microextraction of the target analytes have been investigated carefully, and the optimized extraction conditions were established. It was found that the AAPTS-silica coating with a terminal functional group of -NH-CH2-CH2-NH2 exhibited a high selectivity towards the selected metal ions. With a consumption of 1.0 mL sample solution and 80 microL eluent, the detection limits (3sigma) were found to be 1.8, 11.8, 1.1, 3.3 and 1.4 pg mL(-1) for Cu, Zn, Ni, Hg and Cd, respectively. A sampling frequency of 14 h(-1) and an enrichment factor of 12.5 were obtained under the optimized experimental conditions. The relative standard deviations (RSDs) for the target analytes were less than 3.6% (C = 1 ng mL(-1), n = 7, sample volume = 1 mL). Two certified reference materials of NIES No.10-c rice flour and BCR-CRM 278 mussel flesh were analyzed to validate the proposed method, and the determined values were in good agreement with the certified values. The developed method had also been applied to the determination of trace target elements in human hair, serum and urine, and the recoveries for the spiked samples were in the range of 89.2-101.8%. The AAPTS-silica coated capillary showed an excellent pH resistance and could be used for more than 120 times without decreasing adsorption efficiency.

Adsorption Studies of Heavy Metal Cations on Silica Flat Bed Induced with Microcrystalline Cellulose Gels: Quantitative Determination of Cobalt and Nickel by Optical Scanning Densitometry

Adsorption of Cesium and Some Typical Elements on A Novel Solid-State Macroporous Silica-Calix[4]Arene Material

Efficient solid-phase extraction of Pb 2+ , Cd 2+ , and Cr 3+ using ionic liquid-based bis(trifluoromethylsulfonyl)imide grafted onto silica gel as a novel sorbent

Enrichment of iron(III), cobalt(II), nickel(II), and copper(II) by solid-phase extraction with 1,8-dihydroxyanthraquinone anchored to silica gel before their determination by flame atomic absorption spectrometry

The solid phase extraction of some metal ions using palladium nanoparticles attached to silica gel chemically bonded by silica-bonded N-propylmorpholine as new sorbent prior to their determination by flame atomic absorption spectroscopy

Cobalt and nickel uptake by silica-based extractants

Quantitative Determination of Metal Ion Adsorption on Cellulose Nanocrystals Surfaces

Synthesis and comparison of two different morphologies of graphitic carbon nitride as adsorbent for preconcentration of heavy metal ions by effervescent salt-assisted dispersive micro solid phase extraction method

Synthesis of Nano-silica Oxide for Heavy Metal Decontamination from Aqueous Solutions

Preparation of a high pH-resistant AAPTS-silica coating and its application to capillary microextraction (CME) of Cu, Zn, Ni, Hg and Cd from biological samples followed by on-line ICP-MS detection

In Situ Fabrication and Characterization of g-C3N4 onto Cellulose Nanofibers and Selective Separation of Heavy Metal Ions

Sorption of 134Cs radionuclide onto insoluble ferrocyanide loaded silica-gel

Removal of heavy metal ions using nano-cellulose prepared from rice husk: validation by differential pulse voltammetry

Development and characterization of fluorescent cellulose succinate hydrogels for efficient chromium adsorption

Sol-gel zirconia coating capillary microextraction on-line hyphenated with inductively coupled plasma mass spectrometry for the determination of Cr, Cu, Cd and Pb in biological samples

Evaluating SiO 2 /Al 2 O 3 /poly(acrylic acid-co-glycidyl methacrylate) composite as a novel adsorbent for cobalt(II) radionuclides

Synthesis, application and molecular docking of modified cellulose with diaminoguanidine as complexing agent for selective separation of Cu (II), Cd (II) and Hg (II) ions from alum sample

Green synthesis, characterization, and adsorption of Co(II) and Cu(II) ions from aqueous solution by mesoporous silica MCM-41

Effective adsorptive uptake of hexavalent chromium ions from aqueous systems utilizing a superior activated nanobentonite@cobalt ferrite@carboxymethylcellulose nanocomposite

Synthesis of Cobalt Iron Oxide Doped by Chromium Using Sol-Gel Method and Application to Remove Malachite Green Dye

Tracking the Adsorptive properties of modified nano calcium silicate/CuO composite for Cs(I) and Co(II) uptake from waste stream