Abstract:Electroacoustic transducers arrays operating in the 50–100 kHz frequency range are currently being investigated for underwater applications such as target detection transducers installed on underwater autonomous vehicles (UAV) and detection of underwater intruders to protect and secure economically and strategically critical coastal areas and facilities. However, the frequency range is such that it prevents the use of monolithic piezoceramics operating in the thickness mode due to the unacceptably high voltages that are required to drive them. Whereas the alternative such as Langevin-type transducer solutions have certain other assembly difficulties that arise due to the size limitations imposed on the transducer from the half-wavelength (λ/2) arrangement requirement of the units. In our study, an entirely new alternative was proposed to overcome these difficulties. A piezoceramic transducer constructed from a hollow cylindrical shell form poled in the radial direction was designed and developed to operate at the longitudinal length extension mode. Since the hollow cylindrical piezoceramics were designed and produced with one end closed, this closed end was used as a passive cap with the transducer operating in a piston mode. ATILA finite element analysis code was used to design, analyze and fine-tune the dimensional requirements of the transducer. The center frequency of the transducer was fixed to 70 kHz. Commercial lead zirconate titanate (PZT) composition with hard piezoelectric character (PZT-4) was used as the starting powder. The slip casting method was used to obtain the cylindrical shell form. Single element transducers, as well as a hexagonal close-packed array consisting of seven units and arranged with a distance of half-wavelength (λ/2) to obtain constructive interference at 70 kHz were constructed and tested for underwater electroacoustic performance.

The design and calibration of particular geometry piezoelectric acoustic emission transducer for leak detection and localization

Measurement of Leak Location in Buried Iron Water Pipe with Acoustic Emission and EMD

Health Monitoring of Single-Element Piezoelectric Transducer Using Its Electromechanical Admittance

Design, finite element analysis, fabrication and electroacoustic characterization of transducer arrays from piezoceramics with hollow cylindrical shell form

Performance Comparison of Acoustic Emission Sensor Arrays in Different Topologies for the Localization of Gas Leakage on a Flat-Surface Structure

Transient Wave-Leak Interaction Analysis for Improved Leak Detection in Viscoelastic Pipelines

Acoustic investigation of high-sensitivity spherical leak detector for liquid-filled pipelines

Measurement Of Water Pipe Leak Based On Sensors And Empirical Mode Decomposition Of Power Feature

Fatigue and leakage-type damage detection in metallic plates and pipelines using piezoelectric patch acoustic sensors

Piezoelectric Wafer Active Sensor Transducers for Acoustic Emission Applications

Development of a 16-Channel Broadband Piezoelectric Micro Ultrasonic Transducer Array Probe for Pipeline Butt-Welded Defect Detection

An Improved Method for Pipeline Leakage Localization With a Single Sensor Based on Modal Acoustic Emission and Empirical Mode Decomposition With Hilbert Transform

Design and Analysis of A Piezoelectric Ultrasonic Transducer for Distance Measurement

Active acoustic excitation method for leak detection of buried gas pipelines based on cavity resonance reflection

Localization of Multiple Leak Sources Using Acoustic Emission Sensors Based on MUSIC Algorithm and Wavelet Packet Analysis

Acoustic injection method based on weak echo signals for leak detection and localization in gas pipelines

Transducer finite aperture effects in sound transmission near leaky Lamb modes in elastic plates at normal incidence

Localization of Continuous Gas Leaks from a Flat-Surface Structure Using an Acoustic Emission Sensor Array.

High-sensitivity gas leak detection sensor based on a compact microphone array

Piezoelectric Transducers for Structural Health Monitoring of Joint Structures in Cylinders: A Wave-Based Design Approach

Circumferential SH Wave Piezoelectric Transducer System for Monitoring Corrosion-Like Defect in Large-Diameter Pipes